PLYWOOD & MDF · CHINA

DECORATIVE VENEER PLYWOOD · FROM OUR OWN FACTORY

Decorative & Veneer Plywood

Choose the wood face your customer wants, with the plywood construction your workshop needs. Compare seven veneer ranges plus natural beech for furniture, doors and interior joinery. Our Xuzhou factory can supply full sheets or custom components, with grain matching, edge details and samples planned around your project.

Teak Faced Plywood Sheets from our decorative & veneer plywood range
Teak Faced Plywood Sheets · View this product

START WITH YOUR REQUIREMENT

Carry the wood look through the complete project.

Choose a wood face

Start with the finished piece: a clear-coated cabinet front, paired doors, a wall elevation or a supported liner. The routes below take you to the relevant wood faces and product specifications. Send a drawing or finish photograph if you would like us to help narrow the choice.

Choose the visible veneer and the core together. For a coordinated room or furniture set, identify which parts sit next to each other and where the grain should run. We can then plan samples, sheet sizes and processing around both the appearance and your cutting list.

Scroll sideways to compare all columns.

Decorative & Veneer Plywood selection routes
Selection routeWhat to decideExplore
BirchChoose the face and reverse grades for cabinets and machined parts, then include any visible layered edges in the sample.Birch plywood
OakCompare red or white oak, the veneer cut and leaf matching to shape the grain and finished appearance.Oak plywood
TeakChoose natural teak or an identified engineered teak-look face, with straight or crown grain and thin-panel options.Teak plywood
MahoganyCompare the veneer identity, finished tone and matching across neighbouring furniture or joinery panels.Mahogany plywood
OkoumeChoose the decorative face and thickness around your joinery component, then select the core and bond for the assembly.Okoume plywood
BintangorMatch the face grade, panel thickness and surface preparation to furniture components or protective panels.Bintangor plywood
Pencil cedarSelect the veneer appearance for fitted furniture and interior joinery, with a core and reverse suited to your part.Pencil cedar plywood
Natural beechSelect the natural beech face, visible reverse and plywood construction with the required grain layout and finish reference.Natural beech veneer plywood
Veneer on an MDF substrateIf the drawing calls for fibreboard, carry the wood face, reverse, machining and finished-size requirements into a veneered MDF specification.Veneered MDF alternative

OUR PRODUCT RANGE

Decorative & Veneer Plywood products

Compare 42 configurations from our range. Open a product to compare its specifications and photographs.

Bintangor Plywood Sheets

Bintangor Plywood Sheets

1220 × 2440mm Bintangor-faced sheets in listed 3, 9, 12, 15 and 18mm configurations, predominantly with poplar or eucalyptus veneers. Start a mixed furniture schedule or a 9mm enquiry with the face, bond and cutting requirements.

View product specification
Oak Plywood

Oak Plywood

Red or white oak in eight thicknesses from 3 to 32mm, with a 1220 × 2440mm sheet format. Coordinate grain, core and reverse across the furniture set.

View product specification
18mm Okoume Plywood

18mm Okoume Plywood

18mm cabinet panels with all-Okoume, poplar or eucalyptus cores and both faces calibrated and fine sanded. Three listed formats include 1525 × 3050mm; develop edges, fittings and matched part sets from your drawing.

View product specification
View the other 33 products in this range
2mm Teak Plywood

2mm Teak Plywood

2mm panels in three listed formats, including 1500 × 3000mm, for bonded skins and supported liners. Review the carrier, adhesive, finished thickness and edge together.

View product specification
6mm Birch Plywood

6mm Birch Plywood

6mm birch-faced panels with a published thickness tolerance of ±0.5mm. Explore 1220mm-wide formats with lengths up to 3660mm for supported backs, linings and routing patterns.

View product specification
18mm Bintangor Plywood

18mm Bintangor Plywood

18mm panels in three standard formats plus 610 × 2440 and 610 × 2500mm narrow sheets. Compare poplar, combi or eucalyptus cores and calibrated, sanded or unsanded supply for furniture sides and tops.

View product specification
6mm Bintangor Plywood

6mm Bintangor Plywood

6mm calibrated panels with ±0.2mm thickness reference and poplar, combi or eucalyptus cores. Three formats include 915 × 2135mm for framed inserts, routed shapes and fitted divider sets.

View product specification
Baltic Birch Plywood

Baltic Birch Plywood

Full-birch panels from 4–40mm in the listed TDS range, with B/BB, BB/BB, BB/CP, CP/CP or C/C faces. Compare the four sheet formats and thickness-specific tolerances for furniture and machined parts.

View product specification
CE Pencil Cedar Plywood

CE Pencil Cedar Plywood

Pencil Cedar project range in 2–30mm and three sheet formats up to 1500 × 3000mm, with poplar, hardwood, birch or eucalyptus cores. Select its own grade and bond, then request documents for the intended use.

View product specification
6mm BB Birch Plywood

6mm BB Birch Plywood

Selected BB birch faces in a 6mm configuration with a published thickness tolerance of ±0.2mm. Compare the three listed sheet formats for furniture inserts and coordinated decorative parts.

View product specification
3mm Okoume Plywood

3mm Okoume Plywood

3mm Okoume-faced poplar-core panels, fine sanded on both sides, with ±0.25mm thickness reference. Three formats include 1500 × 3000mm for bonded skins, framed backs and supported linings.

View product specification
9mm Okoume Plywood

9mm Okoume Plywood

9mm panels with all-Okoume, poplar or eucalyptus cores, double-sided fine sanding and ±0.25mm thickness reference. Compare sheet formats and completed weight for removable covers, framed inserts and supported backs.

View product specification
3mm Bintangor Plywood

3mm Bintangor Plywood

3mm panels in 1220 × 2440 and 1250 × 2500mm with ±0.5mm range reference. Choose the face/back pairing and poplar, hardwood, eucalyptus or combi core, then trial the captured back or bonded skin.

View product specification
Birch Plywood 4x8

Birch Plywood 4x8

1220 × 2440mm birch-faced sheets for a coordinated cutting plan. Choose the thickness, face grades and core for each order line, then agree the finished dimensions and packing.

View product specification
12mm Okoume Plywood

12mm Okoume Plywood

12mm panels with all-Okoume, poplar or eucalyptus cores, double-sided fine sanding and ±0.35mm thickness reference. Three formats include 1525 × 3050mm for joined inserts and coated furniture components.

View product specification

DEFINE THE ORDER

What to specify for decorative & veneer plywood

Scroll sideways to compare all columns.

Decorative & Veneer Plywood order specification
RequirementDetails to agreeWhy it matters
Wood face and reverseNatural species or named engineered veneer, face/back grades, veneer cut and visible sides.Select the appearance for the parts your customer will see.
Core and layupPlywood core species, layer arrangement and any visible-edge requirements; select MDF through the separate veneered MDF range.Match the substrate to your joints, hardware, machining and weight needs.
Grain and matchingWithin-panel leaf matching, neighbouring panel sequence, grain arrows and part/elevation positions.Keep paired doors and larger surfaces coordinated through cutting and assembly.
Sheet or component dimensionsThickness, actual sheet size, finished dimensions, cutting allowances and drawing revision.Choose a usable format and account for the coating or edging that affects fit.
Supplied finish and processingSanding, coating reference, cut edges, holes, rebates, routing and any factory-finished operations.Compare quotes for the same work arriving at your workshop.
Service and project documentsIndoor, humid or other intended use; selected bond, emission or fire requirements and relevant product documents.Bring appearance and application needs into the same panel specification.
Order, packing and deliveryQuantities by part or sheet, accepted sample, matching-group IDs, pack sequence and destination.Keep the approved panel choice connected to production and receiving.

Make the wood finish work across the whole project

Book or slip matching describes how veneer leaves meet within a panel. A sequence describes how separate panels sit next to one another. Mark both on the elevation or part list and review the chosen coating on a representative group. This helps us keep the intended look through machining, packing and replacement parts.

Choose the core around the component

A teak, oak or birch face gives the visible wood character; the core supplies the construction behind it. Tell us about exposed edges, fittings, routed details and the component size. We can compare the plywood options or a veneered MDF alternative using the same face and finish reference.

Compare complete supply costs

Use the same face, reverse, core, thickness, usable format and finish when comparing quotations. List cutting, edging, machining, inspection and packing separately where needed. A sheet that fits your parts efficiently can reduce waste and workshop time as well as the material bill.

FOR YOUR PURCHASING TEAM

Reports for products in this range

See how a CP birch plywood order was checked before shipment, from dimensions and moisture to protected export packs. Use the inspection case to plan the checks for your own order.

FROM PANEL TO COMPONENT

Match the construction to the application

Cabinet doors and fronts

Mark paired doors, visible reverse faces, hardware positions and edging. Review the sample after the intended coating so a stain does not reveal an unexpected difference.

Wall and joinery panels

Provide the full elevation, joint positions and fixing detail. Keep any named project performance requirement separate from the decorative species selection.

Furniture sides and inserts

Identify visible edges and whether the panel is a structural component, a supported liner or a decorative facing. The thickness and construction must suit that actual role.

SAMPLE THE PROPOSED PANEL

Approve the visible group and the finished detail.

Start with the decision you need to make: the wood appearance, a fitted component, or the relationship between neighbouring panels. Send a finish reference and the part or elevation drawing; we can plan a useful sample around them.

Review the intended coating and visible reverse alongside the face and edge. Retain the accepted sample and drawing revision so the factory order, workshop and receiving team work from the same reference.

Scroll sideways to compare all columns.

Choose the assessment your team needs
AssessmentSample or trial scopeRecord to retain
Wood-face and matching setCandidate veneer faces, representative colour and grain, reverse and neighbouring pieces under the intended coating.Species or engineered-veneer reference, face grades, cut, leaf matching and panel sequence.
Machined and finished detailSelected core with the actual joint, routed profile, fitting or exposed edge.Drawing revision, supplied operations, finished size, fit and face-to-edge appearance.
Full panel or elevation groupRepresentative paired doors, wall panels or a larger component in its intended orientation.Panel positions, grain arrows, finish, accepted group and packing identities.

SAMPLE & ORDER ACCEPTANCE

Check the selected decorative & veneer plywood configuration

  • Compare the face, reverse and finished edge with the accepted sample or matched group.
  • Check panel dimensions, grain arrows and visible features against the drawing.
  • Try the critical joint, fitting or routed detail in the proposed core and finish.
  • Keep product documents with the selected construction and intended use.
  • Match part and pack labels to panel positions, quantities and the delivery schedule.

See our production and quality checks

BEFORE YOU ORDER

Decorative & Veneer Plywood questions

Can you supply unfinished or finished decorative plywood?

Yes. Tell us whether your workshop will coat the veneer or you want an agreed finishing service. We will include the surface preparation, finish reference and edge treatment in the sample and quotation.

Which plywood should I use for a curved decorative part?

Send the curve, radius and component drawing. We can discuss a suitable panel construction and a forming sample, including the decorative face and backing, so you can review the finished curve before the main order.

How do I compare prices across species?

Keep the core, thickness, sheet size, face/back grade, veneer type and finish constant. Otherwise the quotation may be comparing different panels as well as different appearances.

How do I order cabinet-grade or furniture-grade plywood?

Tell us what you are making and which faces and edges remain visible. We will help select the veneer, core, thickness and finish, then include the agreed grades, sample and project documents in your quotation.

Can you supply decorative panels for fitted interiors and demanding projects?

Yes. Tell us whether the part is a supported wall facing, cabinet component, liner or another designed assembly. Share any fire, emission, moisture or structural requirement with the drawing so we can include the selected construction and relevant documents in the enquiry.

How do I choose between veneered plywood and veneered MDF?

Bring the part drawing, machining and edge finish. Plywood uses bonded wood veneers; MDF uses a fibreboard substrate. We can compare the construction, visible edges and supplied operations around your furniture design while keeping the chosen wood face and finish consistent.

Can you match panels across paired doors or a whole room?

Yes. Send the elevation or part schedule with panel positions and grain direction. We can plan the veneer selection, leaf matching and panel sequence, then prepare a representative finished group for your approval. Keep that group reference with the order and any replacement parts.

WORK DIRECTLY WITH OUR FACTORY

Bring your veneer design to our factory team.

Send the sizes or drawing, quantity and destination, plus the wood finish and core you prefer. We will help complete the panel specification and sample plan, then quote the sheets or processed parts your project needs.

  • Wood face or finish reference; natural or engineered veneer
  • Plywood core and visible face, reverse and edges
  • Sheet sizes or component drawing with grain and matching groups
  • Thickness, finish, included processing and quantities
  • Required documents, destination and delivery timing

Have a drawing, cutting list or sample photograph? Email it to sales@plywoodsupplier.cn. Add your company name and project reference so we can connect it with your enquiry.

Available to order. Production takes 10–15 days, with container shipping and freight terms arranged for your order. Our after-sales warranty is 180 days.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗