Choose the finish and edge together
Compare shade, texture, sheen and the glue line on a finished corner. For woodgrain or gloss fronts, view adjoining parts under the project lighting. Carry that physical reference into the order.
PLYWOOD & MDF · CHINA
MELAMINE MDF · FROM OUR OWN FACTORY
Find the melamine MDF for the furniture you are making. Compare white, colours, woodgrain, black and gloss; choose the MDF grade for the room, then order full sheets or factory-prepared parts. We manufacture the MDF substrate in our own factory and bring the face, reverse and edges into your order.

START WITH YOUR REQUIREMENT
Choose by the decision you need to make: the finish your customer will see, a particular white-board thickness, a moisture-resistant cabinet construction or the complete set of furniture parts. Each route below opens its own specifications, samples and buying details.
Use the colour catalogue to shortlist the look, then compare the actual MDF face and finished edge. For adjoining fronts or fitted cabinet parts, take the selection into a representative component or assembly.
Scroll sideways to compare all columns.
| Selection route | What to decide | Explore |
|---|---|---|
| Mixed thicknesses and sheet sizes | Plan fronts, sides and backs across the general sheet range. Keep each decor, MDF grade, thickness and format on its own order line. | Melamine MDF sheet range |
| A colour to match your design | Shortlist solid colours or decorative references, then choose the actual texture, sheen, reverse and matching edge. | Melamine MDF colours |
| Wood-look cabinet and wardrobe fronts | Choose printed woodgrain with texture and sheen; mark grain direction and the appearance of neighbouring parts. | Woodgrain melamine MDF |
| Dark furniture and display features | Compare the black tone and sheen with the finished edge. Include cut-outs and any exposed MDF in the processing plan. | Black melamine MDF |
| Reflective doors and furniture fronts | Review the actual gloss face, reverse and glue line under project lighting, then approve a processed front and its protection. | High-gloss melamine MDF |
| 12mm inserts, dividers and supported backs | Start with the 2400 × 1200mm white-board configuration. Check actual finished thickness, receiving grooves and hardware for the part. | 12mm white melamine MDF |
| 18mm cabinet sides, fronts and supported shelves | Compare the 2440 × 1220mm white sheet and smaller formats. Include shelf supports, finished edges and the selected fittings. | 18mm white melamine MDF |
| Kitchen, bathroom or utility cabinets | Choose moisture-resistant MDF around humidity, splashes and cleaning. Carry edges, pipe openings and site cuts into the cabinet detail. | Waterproof melamine MDF |
| A complete furniture component order | Organise doors, sides, shelves and backs by part. Specify cutting, edging, hardware preparation, handed parts and packing by set. | Melamine MDF for furniture |
DEFINE THE ORDER
Scroll sideways to compare all columns.
| Requirement | Details to agree | Why it matters |
|---|---|---|
| MDF grade and use | Room, furniture part, moisture exposure and required material documents. | Choose the substrate with the application; a colour or gloss name does not select the MDF grade. |
| Decor and both faces | Actual decor, texture, sheen, reverse and matching edge reference. | Keep neighbouring parts and visible backs coordinated. |
| White-board configurations | 12mm white: 2400 × 1200mm. 18mm white: 2440 × 1220mm, plus 1220 × 1220, 1220 × 610, 610 × 610 and 610 × 300mm. | Use the chosen product’s dimensions in the cutting plan. These two white-board configurations have separate formats. |
| Other formats and MR construction | Use the size and thickness options on the selected product page. For moisture-resistant panels, name the MR grade, decor, finished thickness and required dimensions together. | General sheet-range options are planning references; the quotation records each selected finish, substrate and format. |
| Finished dimensions and processing | Sawn blanks or finished edged sizes, drawing revision, reference face, net edge build-up, holes and routed details. | Connect the supplied work with final fit and the operations remaining in your workshop. |
| Parts and quantities | Quantities per configuration, grain direction, left/right identity, complete sets and useful spares. | Label and pack the components in the order your workshop needs them. |
| Samples and documents | Accepted face-and-edge sample or processed part, relevant material report and required inspection. | Keep the sample, selected construction and order line connected through production and receiving. |
Compare shade, texture, sheen and the glue line on a finished corner. For woodgrain or gloss fronts, view adjoining parts under the project lighting. Carry that physical reference into the order.
Full sheets, cut blanks and prepared components include different work. Mark the finished dimensions, edging and machining on your drawing so the quotation matches what your workshop expects to receive.
Start with a panel and edge for appearance. Add a processed opening or hardware fitting for workshop checks, or a representative door, cabinet or group when assembly and adjoining parts determine the choice.
Use one order line for each selected product, MDF grade, decor and thickness. Add finished part sizes, edge and machining details, quantity and the sample reference so your team can compare the same supplied work. Use the panel schedule worksheet.
OUR PRODUCT RANGE
Compare 9 configurations from our range. Open a product to compare its specifications and photographs.

Shortlist 100 solid-colour and 100 woodgrain references, then match the actual panel, texture and finished edge.
View product specification
12mm white MDF in 2400 × 1200mm sheets for inserts, dividers and supported backs; plan grooves, fit and finished edges.
View product specification
18mm white MDF in 2440 × 1220mm sheets and four smaller formats for cabinet sides, fronts and supported shelves.
View product specification
Plan mixed sheet sizes and thicknesses with the selected MDF, decor and processing for each order line.
View product specification
Coordinate printed woodgrain, texture, grain direction and adjoining fronts, with matching edges and part labels.
View product specification
Turn doors, sides, shelves and backs into one cutting, edging, machining and labelled packing schedule.
View product specificationDevelop a dark furniture or display finish with the black face, processed edge, openings and surface care reviewed together.
View product specificationChoose reflective fronts with the face, reverse, glue line and full-size sample checked under project lighting.
View product specificationChoose MR MDF for kitchen, bathroom and utility cabinets, with the decor, protected edges, openings and cabinet sample.
View product specificationFOR YOUR PURCHASING TEAM
Review the emission reports for 18mm white MDF and HMR MDF, and see the separate 17mm slatwall MDF order inspection with matching aluminium channels. Open the configuration relevant to your purchase and request its documents.
SGS records a formaldehyde result of 0.080 mg/m³ and PASS for the 18mm white MDF board, using a method with reference to EN 717-1:2004.
Panel in this range: 18 mm MDF; white colour board
Issued by: SGS-CSTC · 12 September 2025
SGS records a formaldehyde result of 0.080 mg/m³ and PASS for HMR MDF, using a method with reference to EN 717-1:2004.
Panel in this range: HMR MDF; green board
Issued by: SGS-CSTC · 13 November 2025
HQC records an overall PASS for this 17mm melamine slatwall MDF order, with dimensional, appearance and weight checks and a passed aluminium channel assembly check.
Panel in this range: 17mm melamine faced slotted MDF; 8 × 4 ft; white and brown; matching aluminium channels
Issued by: HQC / China Inspection Service · 17 October 2026
FROM PANEL TO COMPONENT
SAMPLE THE PROPOSED PANEL
Shortlist a decor online or send your own reference. Use the actual panel and finished edge to choose the appearance, then add the part or assembly that matters to your workshop. Keep the accepted finish and drawing reference with the production order.
Scroll sideways to compare all columns.
| Assessment | Sample or trial scope | Record to retain |
|---|---|---|
| Panel and finished corner | Selected MDF, actual decor, texture, sheen, reverse and matching edge. | Finish and edge references, visible faces and viewing conditions. |
| Processed component | Planned cutting, edging, holes or routed opening, with the relevant fitting and exposed-core treatment. | Drawing revision, finished dimensions, supplied operations and the fit to approve. |
| Representative front or cabinet | Adjoining fronts, a furniture group or an MR cabinet with the parts and hardware seen and fitted together. | Grain direction, part identities, gaps, movement, protection and packing sequence. |
SAMPLE & ORDER ACCEPTANCE
DOCUMENTS & ORDER SUPPORT
We help your purchasing team gather product reports, inspection records and packing documents for your order.
Product reference: Melamine MDF — specification.
Take the published report for your chosen panel into the document review, together with your required standard and order specification.
View reports for this rangeWe can plan production and inspection around your panel specification, with dimensional checks, recorded readings and packing photographs for your order.
Plan the inspection scopeWe prepare packing details, pack quantities and dispatch documents for your order. Share the destination and receiving requirements so our team can help plan delivery.
Review the delivery scopeFor your supplier approval, send the configuration and document list for your order. Our team will connect the relevant reports, inspection and packing records.
BEFORE YOU ORDER
Use the general sheet range for mixed sizes and thicknesses; colours, woodgrain, black or high-gloss for appearance; the 12mm and 18mm white pages for those specific configurations; moisture-resistant melamine MDF for humid-interior cabinets; or the furniture page for a complete component schedule.
Each product page shows its bulk-order price range in US dollars per cubic metre. Send the selected MDF, decor, thickness, sheet or component quantity and destination for a quotation. Specify cutting, edging and machining; freight and delivery terms are agreed for the order.
The 12mm white configuration uses 2400 × 1200mm sheets. The 18mm white configuration uses 2440 × 1220mm sheets, with four smaller formats listed on its product page. Use the chosen product’s dimensions and actual finished thickness when preparing the cutting list or checking fit.
Start with moisture-resistant melamine MDF and tell us about humidity, splashes, cleaning and the cabinet detail. Choose the MR grade with the decor, then include outside edges, hidden cuts, pipe openings and site work. Send exterior or continuously wet exposure details so the factory can propose the material and finish for that use.
Shortlist from the 100 solid-colour and 100 woodgrain references, or send an existing finish sample. We connect that direction with the actual production decor, texture, MDF and matching edge. Approve the physical finish and keep its reference with the order.
These are different facing constructions. The high-gloss route here uses a melamine decorative face on MDF. Send the actual finish reference when comparing PET film, a separate HPL laminate or real wood veneer so the quotation covers the corresponding face, reverse and edge.
Yes. List the decor, MDF grade, thickness and quantity for each part, with finished dimensions, visible edges, grain direction and required machining. Use the furniture-component page to organise the schedule; samples and quantities are arranged for your selected configurations.
The reports section links the published 18mm white MDF and HMR MDF emission reports with their related products. Send the MDF grade, thickness, facing, destination and required documents. Keep emission evidence, moisture requirements and surface checks connected to the construction being supplied.
WORK DIRECTLY WITH OUR FACTORY
Bring your preferred finish, cutting list or furniture drawing to our factory team. We manufacture the MDF substrate and help you bring the decor, visible faces, matching edges and component sizes into one specification. Start with a finished sample, or request a quote for the parts on your schedule.
Have a drawing, cutting list or colour reference? Email it to sales@plywoodsupplier.cn. Add your company name and project reference so we can connect it with your enquiry.
Your quotation brings together the selected MDF and facing, approved samples and drawings, included cutting or machining, quantities by component, packing identification and agreed production and delivery arrangements.
Tell us your panel, dimensions, quantity and destination port.