PLYWOOD & MDF · CHINA

White melamine-faced plywood sheets with white decorative surfaces and layered plywood edgesView the white face and plywood construction

OUR FACTORY · PRODUCT DETAILS

White Melamine Plywood

A coordinated white face, clean edge and plywood core for your furniture.

We manufacture white melamine plywood sheets and components in Xuzhou, China. Choose the core, white finish and reverse, then order the sizes, machining and edges your workshop needs.

Thickness range
5 / 9 / 12 / 15 / 16 / 18 / 21 / 25mm
Sheet lengths
2440 / 2745 / 3050mm · 1220mm wide
Core choices
Poplar / combi / eucalyptus / birch

Choose the white tone, reverse and edge together; sheets or processed parts to your order.

WHITE FURNITURE · FACTORY SUPPLY

White melamine plywood, ready for your furniture plan

White melamine plywood combines a clean decorative surface with a layered plywood core. Use it for cabinet interiors, shelving, wardrobes and fitted furniture, with matching edge bands or a finished exposed plywood edge. Our factory in Xuzhou supplies full sheets and cut components, including the machining and edging your workshop needs.

Start with the white you want and the part you are making. The listed thickness range is 5, 9, 12, 15, 16, 18, 21 and 25mm. Choose 1220mm-wide sheets in 2440, 2745 or 3050mm lengths, then select poplar, combi, eucalyptus or birch core with the face and reverse finish.

Full sheets for your workshop

Send thicknesses, quantities and the largest parts on your cutting list. Include your white decor or edge-band reference so we can quote the panel your team will process.

Parts prepared for assembly

Send finished dimensions, part codes and the edge and hole schedule. We can include cutting, drilling, routing, edging and labelled packing in the order.

TECHNICAL DATA · TDS-PS-23 · Rev 2.0 (Oct 2026)

White Melamine Plywood technical data

Choose white melamine plywood for cabinet interiors, shelving and furniture parts. Specify the white reference, texture and gloss beside the edge band and adjacent panels, then choose the plywood core and finished dimensions.

Declared values from our technical data sheet TDS-PS-23, Rev 2.0 (Oct 2026). The values for your order are confirmed in the quotation.
Harmonized System (HS) Code4412.33 / 4412.39
Reference StandardsEN 14322, ISO 4586, EN 636-1 / EN 636-2, EPA TSCA Title VI / CARB Phase 2
Service Class / Exposure DutyService Class 1 & 2 (Interior Cabinetry, Wardrobes, Office Furniture & Wall Panels)
Surface OverlayThermally fused melamine-impregnated decorative paper (85–110 g/m² paper basis weight); specify the decorative face and reverse finish
Decor / ColourWhite melamine decor; select the required white tone, including warm-white options
Surface TextureSmooth matte or another selected white surface texture
Sub-Face Barrier Veneer0.55–0.80 mm calibrated Eucalyptus or Okoume whole-piece veneer (anti-telegraphing cushion)
Core Veneer OptionsPoplar Core (Lightweight), Combi Core (Standard Cabinet), or 100% Eucalyptus / Birch Core
Adhesive SystemMelamine-modified UF system; select the E0 / E1 or TSCA Title VI / CARB P2 emission requirement and applicable documents with the ordered construction.
Edge Banding CompatibilityMatched 0.8–2.0 mm ABS / PVC edge-banding tape available
Standard Sheet Sizes1220 × 2440 mm (4' × 8'), 1220 × 2745 mm (4' × 9'), 1220 × 3050 mm
Length & Width Tolerance±1.0 mm (EN 315)
Thickness Tolerance±0.25 mm (≤ 15 mm) | ±0.30 mm (16–25 mm) (EN 315 / EN 14322)
Squareness≤ 1.0 mm / m (EN 324-2)
Panel Flatness (Balanced 2-Side Lamination)≤ 1.5 mm / m (EN 14322)
Edge Chipping on Panel Saw (Scoring Blade)≤ 0.3 mm (EN 14323)
Surface properties and poplar/combi cabinet-core performance
Substrate Density, kg/m³540–630 for the poplar/combi cabinet-core configuration; select the density separately for eucalyptus or birch cores.
Test method: EN 323
Moisture Content at Dispatch, %8.0 – 11.0
Test method: EN 322
Bending Strength — Longitudinal (MOR //), MPa≥ 42.0
Test method: EN 310
Modulus of Elasticity — Longitudinal (MOE //), MPa≥ 5,200
Test method: EN 310
Surface Abrasion Resistance (Taber), Revolutions (IP)≥ 150 r for the solid white decor
Test method: EN 14322 / EN 14323
Surface Scratch Resistance, N≥ 1.5 N
Test method: EN 14323
Surface Stain & Household Chemical Resistance, Class (1–5)Class 5 (No visible change to coffee, acetone, alcohol)
Test method: EN 14323
Surface Bond Strength, MPa≥ 1.0
Test method: EN 311
Screw Withdrawal — Face / Edge, N≥ 1,650 (face) / ≥ 1,180 (edge) for the stated cabinet-core configuration
Test method: EN 320
Formaldehyde release — E0 option, mg/m³≤ 0.05 mg/m³ · EN 717-1
Formaldehyde release — TSCA Title VI / CARB P2 option, ppm≤ 0.05 ppm · ASTM E1333
Thickness, ply count, weight and container loading
Nominal Thickness Ply Count Area Weight Sheet Weight (1220x2440) Est. Load / 40HQ
5 mm5 plies2.93 kg/m²8.7 kg~3,080 pcs
9 mm7 plies5.26 kg/m²15.7 kg~1,707 pcs
12 mm9 plies7.02 kg/m²20.9 kg~1,282 pcs
15 mm11 plies8.78 kg/m²26.1 kg~1,026 pcs
16 mm13 plies9.36 kg/m²27.9 kg~960 pcs
18 mm13 plies10.53 kg/m²31.3 kg~856 pcs
21 mm15 plies12.29 kg/m²36.6 kg~732 pcs
25 mm17 plies14.62 kg/m²43.5 kg~616 pcs

Weights and loading quantities use 1220 × 2440 mm sheets at a 585 kg/m³ planning density and approximately 26.8 tonnes of net panels. Core, decor, packing and route payload limits determine the final shipment quantity.

Choose the surface from our melamine colour and woodgrain catalogue, then keep the decor code, texture, reverse and matching edge band with the order.

Order options for White Melamine Plywood

Sizes, finishes & supply requirements

CONSTRUCTION & SUPPLY CONDITION

Our product configuration and order requirements
Thickness choices5, 9, 12, 15, 16, 18, 21 and 25mm in TDS-PS-23
Sheet formats1220 × 2440mm, 1220 × 2745mm and 1220 × 3050mm; request custom parts with the selected construction
Plywood coresPoplar, combi, eucalyptus or birch; identify the selected construction
White surfaceWhite including warm-white options, smooth matt or selected texture, with the physical finish reference
Face and reverseWhite on both visible faces or a separately specified reverse
Sub-face veneer0.55–0.80mm calibrated eucalyptus or Okoume whole-piece veneer beneath the decorative paper
Edge finishMatching 0.8–2.0mm ABS/PVC bands, or a selected protective finish on exposed plywood
Thickness tolerance±0.25mm for listed thicknesses up to 15mm; ±0.30mm at 16–25mm
Sheet geometryLength/width ±1.0mm; squareness ≤1.0mm/m; balanced double-sided panel flatness ≤1.5mm/m
Core dataPoplar/combi cabinet-core density 540–630kg/m³; eucalyptus and birch core selections identified separately
Supplied operationsFull sheets or cut, drilled, routed and edged parts, with finished sizes and part codes
Documents and packingTDS-PS-23 Rev 2.0; selected construction, relevant product documents, inspection and labelled packs

Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.

MATCH THE PANEL TO THE FURNITURE

A coordinated white finish across the whole cabinet

Kitchen cabinet interiors

Keep sides, shelves and open-door views coordinated. Include sink cut-outs, plumbing and cleaning exposure when choosing the bond and protection around edges and openings.

Wardrobes and storage

Match shelves, visible end panels and divider faces. Bring clothes-rail fittings, connector holes and rear grooves into the same component schedule.

Open shelving and displays

Include shelf undersides and front edges in the finish group. Send the span, support and expected loading so the panel and fitting choice follows the actual shelf.

Office and retail furniture

Plan panels seen from both sides, cable openings and removable access parts. Label component sets so repeated units arrive ready for workshop allocation.

WHITE TONE · TEXTURE · SHEEN

Match the white face and edge as one finish

Choose a clean white or warm-white reference with a smooth matt or selected texture. Send a decor code, panel, edge-band strip or existing furniture sample; a photograph is a useful starting point. Compare the face, reverse and completed corner beside the adjoining materials under the intended room lighting.

The white finish references to bring together
ChoiceReference to provideReview on the sample
White toneDecor code or retained physical faceFace beside edge band, doors, frames and neighbouring furniture.
Texture and sheenSmooth matt or selected finishSurface reflection on both horizontal and vertical parts.
Edge bandActual ABS/PVC band and adhesive processTone, joint line, trimmed corner and edge radius.
Matching groupAdjacent panels and their installed positionsA pair or assembled corner viewed under the project lighting.

Similar whites can look different when the texture, gloss or lighting changes. Retain the accepted face-and-edge combination for production and repeat orders. If your purchasing specification uses measured colour limits, include the reference, measurement conditions and colour-difference method with the sample.

Browse the melamine colour catalogue for a finish direction, then use a physical sample to choose the white for your furniture.

CHOOSE THE VENEERS BENEATH THE FACE

Select the core for the edge, fitting and handling

Choose poplar for the lightweight core route, combi for the listed cabinet-core construction, or eucalyptus or birch for a separately selected all-species core. The technical sheet groups the 540–630kg/m³ density and cabinet-core performance under the poplar/combi configuration; use the data for the core your order will contain.

The surface build includes a 0.55–0.80mm calibrated eucalyptus or Okoume sub-face veneer beneath the decorative paper. Bring the finish, core and critical routed or drilled detail into the same sample so the face and the construction behind it can be assessed together.

A continuous white edge

Matching 0.8–2.0mm ABS or PVC bands carry the white around the perimeter. Inspect the prepared plywood edge before covering it, then review the glue line and finished corner.

An exposed layered edge

Leave the veneer layers visible for contrast with the white face. Choose the core appearance, edge preparation and protective finish on the component sample.

For a fibreboard substrate, compare 18mm white melamine MDF. For other colours on plywood, see the melamine-faced plywood range.

FINISH THE VISIBLE SIDES

Map the face, reverse and edge by component

A white cabinet looks finished when the undersides, open-door views and corners work together. Specify white on both faces where both are visible, or identify a different concealed reverse. Mark each banded or protected edge on the part list.

A cabinet face and edge schedule
ComponentBroad facesEdges to identify
Cabinet sidesInterior face and any exposed outside faceFront edge; exposed top, rear and bottom edges.
Top and bottomCompartment side and visible outer surfaceFront and any perimeter left visible after assembly.
Central dividerBoth faces within the open compartmentsFront, joints and edges near fittings.
Removable shelvesTop and visible undersideFront plus any other exposed or protected edges.

Use matching-group and part codes on the cutting list and packs. For replacement parts, send the retained white reference and a sample of the furniture they will join.

CABINET CUTTING WORKSHEET

Turn finished cabinet dimensions into a part list

For a 900 × 720 × 350mm open cabinet made with 18mm panels, use two full-height sides, top and bottom between them, a centred divider and two removable shelves. The top and bottom are 900 − 2 × 18 = 864mm wide; the divider is 720 − 2 × 18 = 684mm high. Each clear compartment is (900 − 3 × 18) ÷ 2 = 423mm.

A 421 × 320mm shelf gives 2mm total side clearance and 30mm rear space when aligned at the front. With a 1mm net front band, prepare a 421 × 319mm core. Apply the same finished-depth calculation to the 350mm-deep components.

Open the cabinet drawing and seven-part cutting schedule
White plywood cabinet component layoutFront elevation at 0.48 drawing units per millimetre. Overall width 900 and height 720mm; all panels 18mm. Two full-height sides, top and bottom between sides, a centred divider and two 421mm-wide shelves. Each clear compartment is 423mm wide. Cutting worksheet; add fixings, back and support to the assembly drawing.Seven-part white cabinetFront view · 900 × 720mm overall 423mm423mmclear openingclear opening421mm shelf421mm shelfTop / bottom: 864mm between sidesDivider: 684mm between top / bottom18mm panel · fittings on assembly drawing
Seven-part front elevation. Add the back, joints, supports and hardware to the assembly drawing.
Shelf clearance and front-edge band in planPlan of one bay at 0.9 drawing units per millimetre. Opening 423mm wide and 350mm deep. A 421 by 320mm shelf aligns with the front, leaving 1mm each side and 30mm behind. Prepared core depth 319mm with a 1mm net front band. No back panel is included.One shelf, viewed from aboveFinished shelf: 421 × 320mm423mm clear width 30mm rear space · no back shown421 × 319mmprepared core1mm clearance each sideFRONT · 1mm net band319 + 1 = 320mm finished depth350 − 320 = 30mm rear spaceCutting worksheet · dimensions in mm
The finished shelf depth includes the net front-band addition.
18mm cabinet worksheet · one 1mm net front band per part
PartQuantityFinished sizePrepared core
Sides2720 × 350mm720 × 349mm
Top and bottom2864 × 350mm864 × 349mm
Divider1684 × 350mm684 × 349mm
Shelves2421 × 320mm421 × 319mm

These are prepared sizes immediately before front banding. Add raw-blank trimming, any further edge build and the back or fixing details required by your design. Shelf support and loading belong in the assembly specification.

Send your own dimensions and edge map to quote a component package. We can work from finished-part sizes and identify the preparation and machining included in the order.

CHECK THE COMPLETED OPENING

Allow for thickness, edging and fitting clearance

The 18mm TDS thickness tolerance is ±0.30mm, giving 17.70–18.30mm. A cabinet opening also depends on the assembled width, divider position and completed shelf size. Measure the fitted opening and use the support or connector requirements when setting the final clearance.

How the worksheet opening changes with panel thickness
Panel thicknessCentred opening at 900mm overallGap beside a 421mm finished shelf
17.70mm(900 − 3 × 17.7) ÷ 2 = 423.45mm2.45mm total
18.00mm423.00mm2.00mm total
18.30mm(900 − 3 × 18.3) ÷ 2 = 422.55mm1.55mm total

This comparison holds the overall width, centred divider and shelf width constant. Add the tolerances for those parts, squareness and hardware to your actual drawing. Where side edges are banded, subtract their net build from the prepared core width as well.

EDGE BANDING BY PART AND SET

Plan the band length and the cutting allowance

The seven front edges in the cabinet worksheet total 2 × 720 + 2 × 864 + 684 + 2 × 421 = 4.694m. With 20mm of cut allowance at each end of seven strips, the cutting quantity becomes 4.974m per set, or 99.48m for 20 sets.

Set the end allowance for your process and add machine setup, roll ends, other edges and reserve material to the purchasing quantity. Band width and net finished build are separate from strip length; record all three with the selected white reference.

CUT · EDGE · DRILL

Prepare white components for a clean fitted corner

Cut and prepare

Use the panel-saw scoring setup for the selected face and core. Inspect both faces, long cuts, crosscuts and narrow parts before banding, and measure the size after edge preparation.

Band and trim

Choose the adhesive and banding process for the supplied panel and service. Check joint closure, the white glue line, trimmed corners and the net edge addition against the accepted sample.

Drill and fit

Use the actual connector, hinge or shelf fitting. Check hole position, depth, entry and exit quality, and core engagement. Identify whether each hole is located from the prepared core or finished edge.

For plain white panels, mark permitted rotation on the cutting plan after considering texture, reflections and the plywood direction required by the component. Use the same orientation for matched groups.

KITCHENS · STORAGE · DAILY USE

Plan moisture protection and easy care into the furniture

White melamine plywood can be specified for kitchen and bathroom furniture. Tell us about the cabinet location, wet cleaning and cut-outs so we can select the core, bond and protection around edges, holes and joints. See the waterproof melamine plywood route when moisture resistance is a central part of the order.

Store sheets flat, covered and supported; protect white faces during handling and fabrication. Follow the care instructions for the selected surface and edge system, removing loose grit before wiping and checking any cleaner on a spare finished piece. The technical stain-test figures describe the stated test conditions, rather than a general cleaning instruction for the whole assembly.

RECEIVING AND PRODUCTION CHECKS

Check the finish, dimensions and component identity together

  • Compare the white face, reverse and band with the retained physical finish.
  • Check delivered thickness, usable size, flatness and the labelled core configuration.
  • Review cut edges and drilled holes before covering them; check the completed fitting after banding.
  • Match part dimensions, grain or texture direction and machining to the current drawing.
  • Keep furniture sets identifiable in protected, labelled packs.

For a shipment inspection, include the selected panel, inspection points and packing requirements in the order. Our production and inspection process shows how the checking scope connects to delivery.

A SAMPLE THAT MOVES THE ORDER FORWARD

Choose a white face set or a fitted furniture detail

Face and edge comparison

Use the actual white decor, texture, reverse and band alongside your adjoining finish. Retain the approved corner as the appearance reference.

Machined component

Use the selected plywood and actual joint or hardware, including cutting, edging and drilling. Check the completed fit rather than the bare panel alone.

Furniture group

Review paired parts, shelves and dividers in their installed positions. A larger component or assembly can address door flatness, shelf support or matching across a set.

Standard samples without special work or a logo have no sample charge; delivery is separate. Send the drawing and sample purpose for any customised processing.

PRODUCT DATA · ORDER DOCUMENTS

Keep the approved panel connected to the delivery

Use TDS-PS-23 Rev 2.0 for the published configuration values on this page. Send the core, thickness, finish, destination and required documents so our team can connect the relevant product reports and order records to your supply.

From sample approval to shipment
RecordConfiguration to retain
White finishFace, reverse, edge band, texture, sheen and accepted physical reference.
Panel and componentCore, thickness, supplied operations, finished dimensions and drawing revision.
Product documentsRequired method or destination scope and the panel construction covered.
Production and deliveryOrder, lot, part and pack identities with inspection and dispatch records.

PLAN YOUR PANEL ORDER

Bring the accepted white corner into production.

Keep the selected face, core, band and fitted sample together, then quote the sheets or prepared components your workshop needs.

White Melamine Plywood

Your panel and component order

  • Core, thickness and sheet or finished-part sizes
  • White face, reverse and edge finish
  • Quantities, destination and supplied machining
View the product specification

Choose a sample for your project

A finished white plywood corner

Compare the actual white face, reverse and edge on the chosen core, including the joint or fitting used in your furniture.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/white-melamine-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

FULL SHEETS OR COMPONENT PACKAGES

Get a factory quote for your white furniture panels

Send the thicknesses, sheet or finished-part sizes, quantities and destination. Add the white reference, reverse, edge schedule and any cutting, drilling or finishing you need supplied. Our team can complete the specification and sample plan with you.

Available to order. Production takes 10–15 days, with container shipping and freight terms arranged for the order. Our after-sales warranty is 180 days. For repeat furniture sets, keep the accepted finish and part references with any changes to the drawing.

Compare double-sided melamine plywood for other face-and-reverse arrangements, or woodgrain melamine plywood for a wood appearance.

PRODUCT-SPECIFIC QUESTIONS

Questions about White Melamine Plywood

Which thicknesses and sheet sizes can I order?

The technical sheet lists 5, 9, 12, 15, 16, 18, 21 and 25mm, with 1220 × 2440mm, 1220 × 2745mm and 1220 × 3050mm sheet formats. Send your core, finish and quantities to quote the combination, or request cut components from your drawing.

Can you match an existing white cabinet or edge band?

Yes. Send the decor code, physical panel or actual band where possible. We can compare the face, texture, sheen and completed edge beside the adjoining furniture under the intended lighting, then retain the accepted combination for the order.

Is white melamine plywood the same as white MDF?

They can have similar white surfaces but different substrates. Plywood uses bonded wood veneers; MDF uses a fibreboard core. Compare the cut edge, machining, fittings and finished component around the same appearance reference.

Can the panel be white on both sides?

Yes. Specify white on both visible faces or a different reverse where required. Include shelf undersides, divider faces and panels visible when a door is open.

What thickness tolerance applies to an 18mm panel?

The TDS lists ±0.30mm at 16–25mm. At 18mm, that gives 17.70–18.30mm before any separately specified finishing or component work. Use the finished-part dimensions and actual fitting requirements for machined or edged orders.

Can you supply cut, drilled and edged furniture parts?

Yes. Send a drawing and part list with finished sizes, quantities, visible sides, edge codes and hole datums. We can quote the supplied cutting, edging, drilling and labelled packing as a component package.

Is white melamine plywood waterproof?

Tell us where the furniture will be used and the moisture exposure. We can help select a suitable plywood construction and bond, with protection around edges, joints and cut-outs. For moisture-focused orders, use the waterproof melamine plywood route alongside your component drawing.

How do I choose a core for shelving?

Include the shelf span, depth, supports, fittings and expected loading. Compare the selected poplar, combi, eucalyptus or birch construction with a suitable component trial; the technical sheet identifies the poplar/combi cabinet-core data separately.

What does the container-loading table show?

It uses 1220 × 2440mm sheets at a planning density of 585kg/m³ and approximately 26.8 tonnes of net panels. The 18mm row lists 31.3kg per sheet and about 856 sheets per 40HQ. The chosen core, packing and route payload determine the final shipment quantity.

How do I request samples and get production timing?

Send your white reference, selected panel or furniture drawing and destination. Standard samples without special work or a logo have no sample charge, with delivery separate. Custom samples are agreed for the detail. Production is arranged for 10–15 days according to your order.

Can later furniture sets follow the same white reference?

Keep the accepted face, reverse and edge sample with its decor, texture, core and order identity. For a repeat or replacement, send the earlier reference and identify any adjoining aged finish or changes to the component drawing.

Compare the adjacent options

CONTACT OUR FACTORY

Get a factory quote for white melamine plywood.

Send sizes, quantity and destination, with your white finish or furniture drawing. Our team will help complete the panel, sample and processing details.

  • Thickness choices: 5, 9, 12, 15, 16, 18, 21 and 25mm in TDS-PS-23
  • Sheet formats: 1220 × 2440mm, 1220 × 2745mm and 1220 × 3050mm; request custom parts with the selected construction
  • Plywood cores: Poplar, combi, eucalyptus or birch; identify the selected construction

Send drawings or a white finish reference to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗