Teak Faced Plywood Sheets
Natural or identified engineered teak faces across a 3–25mm range, commonly 1220 × 2440mm. Coordinate furniture and interior panels by grain, core, reverse and finish.
View product specificationFURNITURE & INTERIORS · FROM OUR OWN FACTORY
Teak Veneer Plywood
Choose natural teak or an identified engineered teak-look face for furniture, doors and interior panels. Compare thin supported skins with thicker joinery panels, then plan the grain, core, finished edges and custom sizes with our factory.
START WITH YOUR REQUIREMENT
Find the teak panel for your finished component.
Go straight to your product
Natural & engineered faces3–25mm teak-faced range2mm · bonded skins2mm · crown-grain inserts2.5mm · retained inserts3.5mm · supported panels
Start with the finished component. Thin 2, 2.5 and 3.5mm panels need a carrier or frame; the broader teak-faced range serves furniture and interior joinery. Choose natural or engineered appearance, then use straight or crown figure to organise the visible fronts and panels.
Share an elevation or insert drawing with the grain direction and parts that meet. A finished pair, edge or framed sample helps settle the appearance and fit before you commit the sheets to cutting.
Scroll sideways to compare all columns.
| Selection route | What to decide | Explore |
|---|---|---|
| Compare natural and engineered faces | Review both under the same coating. This range lists 3, 6, 9, 12 and 18mm panels in 1220 × 2440mm sheets. | Compare teak face options |
| Bond a 2mm facing | Plan a thin furniture skin or liner with its carrier, reverse preparation and assembly adhesive. | 2mm teak plywood |
| Position a crown-grain face | Place the figure within a finished front or insert. Mark the visible window, top direction and adjoining parts. | 2mm crown teak |
| Fit a 2.5mm insert | Use the full insert dimensions, concealed margins and groove or bonding detail for a recessed accent or framed back. | 2.5mm teak plywood |
| Plan a 3.5mm supported panel | Bring lining joints, access openings and clearances into the part layout. Three listed sheet formats extend to 1500 × 3000mm. | 3.5mm teak plywood |
| Coordinate a joinery set | Choose the face, core and reverse across the 3–25mm teak-faced range, then organise the finish and panel sequence. | Teak-faced plywood range |
OUR PRODUCT RANGE
Teak Veneer Plywood products
Compare 6 configurations from our range. Open a product to compare its specifications and photographs.
3.5mm Teak Plywood
3.5mm panels in 1220 × 2440mm, 1250 × 2500mm or 1500 × 3000mm. Plan supported linings, inserts and access panels around joints, openings and clearances.
View product specification
2mm Teak Plywood
2mm panels in three listed formats, including 1500 × 3000mm, for bonded skins and supported liners. Review the carrier, adhesive, finished thickness and edge together.
View product specification
2.5mm Teak Plywood
2.5mm panels for framed inserts, recessed accents and retained backs. Select the sheet format with the layup, then size the complete insert and its concealed edges.
View product specification
2mm Crown Teak Plywood
2mm crown-grain faces in listed 1220 × 2440mm and 1250 × 2550mm formats. Position the figure within the visible window and across neighbouring parts.
View product specification
Natural & Engineered Teak Plywood
Compare natural teak and an identified engineered teak-look veneer in 3, 6, 9, 12 or 18mm, with 1220 × 2440mm sheets. Sample both with the same finish and edge.
View product specificationDEFINE THE ORDER
What to specify for teak veneer plywood
Scroll sideways to compare all columns.
| Requirement | Details to agree | Why it matters |
|---|---|---|
| Veneer route | Natural teak or identified engineered appearance. | Quote each selected face against its own material and appearance reference. |
| Pattern | Straight/crown reference, grain direction and matching. | Connect the face to the installed layout. |
| Backing and core | Plywood construction and the supporting assembly. | Include the carrier, frame or fixing detail with a thin-panel order. |
| Dimensions | Thickness, usable sheet size and part orientation. | Include cutting and bonding allowances where needed. |
| Finish | Supplied sanding condition, decorative veneer allowance, coating and edge detail. | Judge the final appearance after the specified process. |
| Main sheet ranges | Teak-faced plywood lists 3–25mm at 1220 × 2440mm. The natural/engineered comparison product lists 3, 6, 9, 12 and 18mm in that format. | List the face, core and quantity for each required thickness. |
| Thin-panel formats | 2 and 3.5mm routes list 1220 × 2440mm, 1250 × 2500mm and 1500 × 3000mm. The 2.5mm route uses a 1220 × 2440mm family reference; crown 2mm lists 1220 × 2440mm and 1250 × 2550mm. | Take the selected format, support and visible window into the cutting plan. |
| Supported-part fit | 2 and 3.5mm list ±0.2mm bare-panel references. Agree the actual limits for the 2.5mm and crown 2mm routes with the part drawing. | Include carrier, bond line, retained edges and coating in completed dimensions. |
| Matching and packing | Identify paired fronts, grain arrows, crown position, part sequence and spare matched pieces. | Preserve the selected look through cutting, face protection and labelled delivery. |
Build the thin panel around its support
Select the face, reverse and core with the actual carrier or frame. For bonded skins, specify the converting adhesive separately from the factory plywood bond and include the complete thickness after coating. For curved work, provide the grain direction, radius and forming process for a trial. For load-bearing, exterior or marine work, specify the complete panel, bond, protection and required evidence alongside the teak appearance.
Allocate the grain before calculating sheet quantities
Mark adjoining faces, crown positions and permitted rotation on the elevation. Include trim, joints and visible openings in the cutting plan so a good geometric yield also gives the intended appearance. Review a finished pair or junction, then retain its face reference, drawing revision and part labels for production and repeat pieces.
FROM PANEL TO COMPONENT
Match the construction to the application
SAMPLE THE PROPOSED PANEL
Choose teak grain with the finished assembly in view.
Choose a face comparison, a supported thin-panel detail or adjoining furniture fronts. Use the actual coating and edge; include the visible window and top direction for crown grain. Keep the accepted appearance and completed-fit sample with the drawing and part schedule.
Scroll sideways to compare all columns.
| Assessment | Sample or trial scope | Record to retain |
|---|---|---|
| Natural or engineered face set | The offered faces, identified by material and design, under the same finish. | Tone range, grain, permitted features and accepted coating. |
| Supported thin-panel sample | 2, 2.5 or 3.5mm configuration with its actual frame or carrier. | Bonding or retention detail, visible window, final edge and completed fit. |
| Coordinated furniture group | Paired fronts, a return or sequenced panels with the actual edging. | Matching-group IDs, crown position, grain arrows and face-to-edge appearance. |
SAMPLE & ORDER ACCEPTANCE
Check the selected teak veneer plywood configuration
- Compare the natural or engineered veneer identity, figure and finished tone with the accepted range.
- Check supplied thickness, sheet size, reverse and core against the selected construction.
- Try the thin panel with its actual carrier, frame, adhesive and coating; measure the completed fit.
- Check crown position, grain direction and matching-group labels against the elevation and packing list.
DOCUMENTS & ORDER SUPPORT
Product documents for your order
We help your purchasing team gather product reports, inspection records and packing documents for your order.
Product reference: Teak Veneer Plywood — specification.
Keep these configuration fields together
- Selected panel
- Natural teak or identified engineered material/design, core, reverse, bond, thickness and format.
- Appearance and sample
- Accepted face and coating, crown position, matching groups, edge and support detail.
- Supplied parts
- Drawing revision, full insert or component dimensions, processing stage, quantities and part/pack labels.
- Purchasing documents
- Intended use, destination and required material identity, sourcing, emission or other evidence; connect the applicable inspection and dispatch records to the order.
Product reports for your order
Share the material, thickness and test standard your project requires. Our factory team will help you select the product reports and documents for your purchase.
Production & inspection
We can plan production and inspection around your panel specification, with dimensional checks, recorded readings and packing photographs for your order.
Plan the inspection scopePacking & dispatch
We prepare packing details, pack quantities and dispatch documents for your order. Share the destination and receiving requirements so our team can help plan delivery.
Review the delivery scopeStart with your application or panel reference. Our team will help with the specification and documents.
BEFORE YOU ORDER
Teak Veneer Plywood questions
Should I choose natural teak or an engineered teak-look face?
Compare the actual faces under your intended finish. Natural teak brings its offered grain and tone range; an engineered option uses an identified design and material. We can help select the appearance for your project and keep its identity in the sample and quotation.
Which thin teak panel should I start with?
Compare 2mm for bonded skins and supported liners, 2.5mm for retained or recessed inserts, and 3.5mm for supported linings or access panels. Send the carrier or frame detail and completed size so we can help narrow the construction.
Can you position crown grain on a front or insert?
Yes. Mark the visible opening, top direction and adjoining parts. The dedicated 2mm crown route lets us discuss the figure position, face reference and cutting arrangement, then review a sample against the actual visible window.
Do the thin-panel routes share the same sheet size?
The 2 and 3.5mm ranges list three formats up to 1500 × 3000mm. The 2.5mm route uses 1220 × 2440mm as a family reference, while crown 2mm lists 1220 × 2440mm and 1250 × 2550mm. Select the actual format with the construction and quantity.
Can you supply coordinated teak furniture sets?
Yes. Send the elevation or cutting list with matching groups, grain direction, sizes and quantities. We can plan the veneer, reverse, core, edging and finish, with sample references and labels for the parts that belong together.
Can I use a teak-faced panel for a marine project?
Send the marine use, construction and required documents with your teak appearance brief. We can discuss the complete panel, bond and protection for that job; keep those requirements alongside the selected decorative face in your quotation.
How do I approve the finished fit of a thin insert?
Use the actual frame or carrier and include the retained edges, adhesive and coating. Measure the completed assembly and review the visible grain at the same time, then retain the sample and drawing for the production order.
WORK DIRECTLY WITH OUR FACTORY
Bring your teak layout into a factory quotation.
Send an elevation, insert drawing or sheet schedule with quantities and destination. Add your teak reference and finish; for thin panels, include the carrier or frame. We can help complete the face selection and sample plan.
- Natural or engineered teak reference and finish
- Grain direction, crown position and matching groups
- Thickness, core, reverse, backing and finished dimensions
- Quantities, supplied work, destination and required documents
Have an elevation, insert detail, cutting schedule or finished reference photographs? Email them to sales@plywoodsupplier.cn. Add your company name and project reference so we can connect the files with your enquiry.
Available to order. Production takes 10–15 days, with container shipping and freight terms arranged for your order. Our after-sales warranty is 180 days.