Pencil Cedar Plywood Sheets
Pencil Cedar-faced sheets in 3, 12, 16 and 18mm at 1220 × 2440mm. Select BB/CC, C/C or C/D appearance and a poplar, hardwood or birch core for supported backs, furniture ends and joined parts.
View product specificationINTERIOR JOINERY · FROM OUR OWN FACTORY
Pencil Cedar Plywood
Choose Pencil Cedar-faced plywood for cabinet interiors, furniture ends and coordinated joinery. Start with 3, 12, 16 or 18mm sheets, or discuss the wider 2–30mm product range and project documents. Our factory helps turn your face selection and drawing into samples and a quotation.
START WITH YOUR REQUIREMENT
Choose the visible faces, then the panel construction
Start with the thickness or project brief
Show us which faces stay visible when the furniture is open, closed or viewed from the side. Mark the panel sequence, reverse and edge treatment on a drawing or photo. We will help compare the Pencil Cedar appearance, core and thickness for the complete furniture set.
Use the general product for its four listed thicknesses and 1220 × 2440mm format. The wider product offers different grades, dimensions and supply conditions, with a route for CE-related project enquiries. Choose the material first, then connect the required documents with that exact construction and intended use.
Scroll sideways to compare all columns.
| Selection route | What to decide | Explore |
|---|---|---|
| 3mm captured backs | Start with the general product’s 3mm configuration, then develop its receiving groove, support, finished thickness and visible reverse. | Pencil Cedar 3mm configuration |
| 12, 16 and 18mm furniture parts | Compare the general 1220 × 2440mm sheets with poplar, hardwood or birch cores. Bring the edge, coating and actual joint into the sample. | Pencil Cedar furniture panels |
| Wider sizes and project documents | Explore 2–30mm and three formats, with separate grade, core and bond choices. Include the intended use and any CE-related document checklist. | Pencil Cedar project range |
| Compare veneer appearances | Review another veneer alongside your Pencil Cedar sample under the intended finish and lighting. | Decorative veneer range |
OUR PRODUCT RANGE
Pencil Cedar Plywood products
Compare 2 configurations from our range. Open a product to compare its specifications and photographs.
CE Pencil Cedar Plywood
Pencil Cedar project range in 2–30mm and three sheet formats up to 1500 × 3000mm, with poplar, hardwood, birch or eucalyptus cores. Select its own grade and bond, then request documents for the intended use.
View product specificationDEFINE THE ORDER
What to specify for pencil cedar plywood
Scroll sideways to compare all columns.
| Requirement | Details to agree | Why it matters |
|---|---|---|
| Visible face and reverse | Pencil Cedar appearance on each viewing side, with tone, grain, repairs, joints and the finish reference. | An opened cabinet or exposed end may need two selected faces. |
| General product grades and core | BB/CC, C/C or C/D references; poplar, hardwood or birch core. | Choose the visible-side pairing and inner veneers independently. |
| General product dimensions | 3, 12, 16 and 18mm in 1220 × 2440mm sheets. 3mm thickness reference ±0.2mm; 12, 16 and 18mm ±0.5mm. | Fit a thin back to its support and thicker parts to their own joint or fitting. |
| Wider product dimensions | 2–30mm in 1220 × 2440, 1250 × 2500 or 1500 × 3000mm. Custom sheets and parts by enquiry. | State the nominal thickness in millimetres when the schedule also uses inch trade sizes. |
| Wider product grades and core | BB/BB, BB/CC, CC/CC or CC/DD references; poplar, hardwood, birch or eucalyptus core. | Use this product’s own grade pairing and construction in the quotation. |
| Wider product thickness limits | Listed bands are ±0.2mm at 2–9mm and ±0.3mm at 9–30mm; select the applicable band for a 9mm order. | Keep the chosen tolerance and measuring stage with the component drawing. |
| Bond and supply condition | General product: MR reference and 8–14% moisture. Wider range: MR, melamine or WBP phenolic options and 10–15% moisture reference. | Choose the service, receiving condition and finishing process with the selected product. |
| Sample and finished fit | Grain, groove or joint, hardware, edge treatment, coating and final dimensions. | A face-to-edge sample connects appearance with the completed furniture detail. |
| Project documents and packing | Intended use, destination and required characteristics; applicable declaration, FPC or test records for the selected configuration, with order and pack references. | CE-related documents, emissions and management-system records have separate scopes. |
Choose the face as part of the finished joinery
Review the face, reverse and edging under the intended coating. For adjacent fronts or a panel sequence, compare a larger sample or group of parts in the expected lighting. Keep the accepted tone range, grain direction and permitted veneer features with the drawing for phased deliveries and repeat orders.
Make the project document request specific
For a CE-related enquiry, send the intended use, destination and document checklist with the selected thickness, core and bond. Our team will review the applicable declaration, factory production control (FPC) and test or classification records for that product. Treat any separate emission or ISO 9001 requirement as its own request; the product name alone does not establish the documents’ coverage.
FROM PANEL TO COMPONENT
Match the construction to the application
SAMPLE THE PROPOSED PANEL
Review the inside, outside and edge together.
Send a representative cabinet corner, furniture end or panel junction and mark the visible sides. We can plan a face sample or working detail with the chosen grade pair, core and thickness.
Review it under your coating and edge treatment, then check the completed groove, joint or fitting. Keep the construction and drawing revision with the accepted sample; send the project document checklist alongside it when required.
Scroll sideways to compare all columns.
| Assessment | Sample or trial scope | Record to retain |
|---|---|---|
| Face and reverse sample | The selected Pencil Cedar appearance on each visible side. | Grade pairing, tone range, core and intended finish. |
| Thin captured back | 3mm configuration in its receiving frame or groove. | Support, grain direction, completed fit and edge protection. |
| Joined furniture detail | 12, 16 or 18mm component with actual edging and hardware. | Drawing revision, joint fit, finish and accepted dimensions. |
SAMPLE & ORDER ACCEPTANCE
Check the selected pencil cedar plywood configuration
- Compare the face, visible reverse and finished edge with the accepted Pencil Cedar sample.
- Verify core, bond and supplied condition against the selected general or wider product route.
- Measure thickness, usable dimensions and the completed groove, joint or fitting at the agreed stage.
- Match required documents to the selected construction and intended use, then connect part counts and pack references to the order.
DOCUMENTS & ORDER SUPPORT
Product documents for your order
We help your purchasing team gather product reports, inspection records and packing documents for your order.
Product reference: Pencil Cedar Plywood — specification.
Keep these configuration fields together
- Selected panel
- General 3/12/16/18mm product or wider 2–30mm product; selected format, face/back grade, core, layup and bond.
- Appearance and supplied work
- Accepted finish sample, visible reverse, edge treatment, drawing revision and sheet, blank or component dimensions.
- Project document request
- Intended use, destination and required characteristics; applicable declaration, FPC and test or classification records for the chosen construction, with separate emission or ISO requirements identified.
- Order and delivery
- Quantities, order and part IDs, inspection measurements, protected packs and delivery references.
Product reports for your order
Share the material, thickness and test standard your project requires. Our factory team will help you select the product reports and documents for your purchase.
Production & inspection
We can plan production and inspection around your panel specification, with dimensional checks, recorded readings and packing photographs for your order.
Plan the inspection scopePacking & dispatch
We prepare packing details, pack quantities and dispatch documents for your order. Share the destination and receiving requirements so our team can help plan delivery.
Review the delivery scopeStart with your application or panel reference. Our team will help with the specification and documents.
BEFORE YOU ORDER
Pencil Cedar Plywood questions
Which Pencil Cedar thicknesses and sheet sizes can I compare?
The general product lists 3, 12, 16 and 18mm in 1220 × 2440mm. The wider product lists 2–30mm in 1220 × 2440, 1250 × 2500 and 1500 × 3000mm. Send your part sizes, grain and quantity and we can compare sheet supply and custom components.
Is Pencil Cedar used throughout the core?
Pencil Cedar describes the decorative veneer. The general product lists poplar, hardwood or birch cores; the wider product also lists eucalyptus. We specify the selected core and layup separately with the face and reverse.
Can you help with CE-related project documents?
Yes. Send the intended use, destination, chosen construction and the documents your purchasing team needs. We will review the applicable declaration, FPC and test or classification records for that scope. A product title or grade label does not by itself establish coverage for every thickness, core or intended use.
Which grade pairing should I choose for cabinet interiors?
Mark the faces seen with doors and drawers open, including the reverse and edges. The general route lists BB/CC, C/C and C/D; the wider route lists BB/BB, BB/CC, CC/CC and CC/DD. We can compare the chosen pair under your finish with a sample of the cabinet detail.
Can you cut panels to furniture sizes?
Yes. Send the dimensions, quantities and grain direction, with the required joints, fittings and edge treatment. We can discuss full sheets, blanks or processed components and arrange a sample of the critical detail.
What should a sample show for a thin back or edged part?
For a 3mm back, include the receiving groove, support and coating; the general product lists a ±0.2mm bare-panel reference. For 12, 16 or 18mm furniture parts, include the actual edging, joint and fitting. Keep the completed sample and drawing revision with the order.
WORK DIRECTLY WITH OUR FACTORY
Get a Pencil Cedar panel quotation
Send the furniture drawing, elevation or sheet schedule with quantities and destination. Add the visible-face pairing and finish where known. Our factory team will help settle the core and dimensions, plan samples and review any project document checklist.
- Selected product, face/back grade, core and thickness
- Sheet or part sizes, grain, edge treatment and finish
- Quantities, destination and delivery timing
- Intended use and required project documents
Have a panel sequence, component drawing, finished reference or document checklist? Email them to sales@plywoodsupplier.cn. Add your company name and project reference so we can connect the files with your enquiry.
Available to order. Production takes 10–15 days, with container shipping and freight terms arranged for your order. Our after-sales warranty is 180 days.