PLYWOOD & MDF · CHINA

PROTECT THE PANELS. SIMPLIFY RECEIVING.

Production Checks & Export Packing

Protect your plywood and MDF panels and make receiving easier.

Work directly with our factory on inspection points, face and edge protection, pack labels and handling limits. Start with a panel list, drawing or photo; we help turn the details you have into a packing plan and quotation.

Plywood packs protected and strapped inside our warehouse
Plywood packs protected and strapped inside our warehouse

BEGIN WITH THE RECEIVING END

A pack should protect the panel and help your team use it.

Our factory manufactures plywood and MDF to customer order, with a production cycle of 10–15 days. Inspection and export packing are planned around your order and container shipment. Start with a panel list, drawing or product photo and tell us how the panels will be unloaded, stored and processed at the destination. Full sheets, decorated furniture parts and a mixed-thickness order may need different pack sizes, protection and identification. We help choose those details alongside the product specification.

For cut components, identify whether packs should be grouped by part type, assembly set, room or installation sequence. A packing list with part codes and quantities helps your receiving team distinguish similar-looking parts and find the next set for processing.

Full sheets

Agree sheets per pack or the pack quantity basis, face and edge protection, support and strapping. Include maximum pack weight or dimensions where the receiving equipment imposes a limit.

Decorative panels

Identify the finished faces and any need for separators or protective material. Tell us which edges remain visible and how surface references or grain sequences should be identified.

Cut components

Connect each pack label to a part list and drawing revision. Include the grouping, quantity per set and the order in which parts need to be unpacked.

CHECK THE PANELS AND THE PACKS

Check panel quality and packing against the same order.

Scroll sideways to compare all columns.

Checks to discuss before dispatch
CheckpointOrder-specific referenceUseful record
Panel identificationProduct, core or substrate, face/reverse and thickness.Order configuration or part-list reference.
Dimensions and appearanceAgreed limits, measuring method and sample selection.Measurements and identified face/edge photographs.
Required product evidenceReport scope matched to the specified construction.Relevant report or declaration references.
Quantities and pack contentsSheets or parts per pack and total quantity.Packing list linked to pack identification.
Protection and handlingFace, corners, edges, supports and straps.Photographs showing the agreed packing details.
Shipping marksConsignee reference, product or part identity and destination marks.Legible labels checked against shipping instructions.

Our production and quality guide explains checks by panel family. A packing photograph helps show protection and identification; it does not replace a product test report or a dimensional inspection.

MIXED ORDERS & REPEAT ORDERS

Make each pack identifiable.

Protected panel packs in our warehouse
Panel packs prepared with straps and protective material.

When an order contains several thicknesses, finishes or sizes, clear labels help your team sort the panels and check quantities at arrival. We agree how to distinguish them before loading. Include your internal stock code if the warehouse needs it, alongside a readable product description.

For a repeat order, send the previous packing or label reference and identify any changes. If a label needs a barcode, language or customer-specific format, provide the artwork and data requirements for review.

If you need inspection or loading photographs, agree the required views and identifiers in advance. Ask for a pack label to appear with the relevant detail so the image can be connected to the order.

CONNECT THE ORDER TO THE PACK

Make every pack traceable to the right order line.

For an order with several thicknesses, finishes or cut parts, agree how the panel identity will appear on the packing list and the physical pack. A pack-by-pack record helps the receiving team separate several configurations, reconcile the total sheet quantity and preserve an installation sequence.

Scroll sideways to read all columns.

Pack identification for mixed panel orders
InformationHow to use itReason to keep it distinct
Order and line referenceConnect the pack with the quoted panel construction and quantity.The same thickness can have different cores or faces.
Pack numberUse an individual identifier and state the pack count for the shipment.A pack is a handling unit, not automatically one product line.
ContentsList panel or part code, dimensions, finish and quantity within that pack.If a mixed pack is agreed, each contained line needs its own quantity.
Orientation or sequenceMark face orientation, component sets or installation sequence when required.Decorative parts can lose their intended order during unpacking.
Handling informationState the agreed pack dimensions and weight information.Forklift access and receiving limits need pack data, not only sheet size.

Ask us to discuss the packing-list format before labels are prepared. If your warehouse uses a stock code, send it alongside our quoted product description. Keep quantities in clearly named units: sheets, pieces and packs are different counts.

BEFORE THE LOADING DATE

Coordinate the product release and the shipment.

We review the agreed inspection scope, quantities, documents and pack details with the order. Where an independent inspection is required, send the sampling plan, inspection checklist and proposed timing before the production schedule is finalised.

Agreed inspection records help us identify and resolve any discrepancy before dispatch. A change to the quantity or pack arrangement can affect the packing list and freight plan, so shipping instructions should use the same order revision.

For destination, delivery-term and transport questions, use our export delivery guide. For general payment and order steps, see ordering questions.

AFTER ARRIVAL

Check the delivery and keep each pack identifiable.

All products include a 180-day after-sales warranty. At receipt, keep the pack labels and check the delivery against the packing list. If there is visible damage or a quantity concern, photograph the pack, label and affected panels before discarding the protection. Include the unloading condition and the quantity affected.

For an appearance query, photograph the panel under clear lighting and identify the agreed sample. For a size query, provide the measured location, method and reading. Email those details with the order reference so we can review the specific issue and agree the next step.

Ask our team to review your order or receiving issue. Include the order reference, pack identification and the affected quantity in your message.

WHEN THE RECEIVED COUNT OR CONDITION DIFFERS

Show the location and extent of the issue.

Identify the affected pack

Photograph the label and the pack as received before discarding wrapping or separating the sheets. Include the order line, date received and whether the issue affects one pack or several.

Separate count from condition

Report a quantity difference by product or part code. For damage or a surface concern, distinguish the outer packaging condition from the condition of the panels inside.

Make measurements interpretable

Show the measuring tool, units, measurement location and the face or edge concerned. Add an overall view so a close-up can be located on the panel.

Keep the affected material identifiable while we review the information with you. Tell us if processing or installation has started and which quantities remain unprocessed. We can then discuss the relevant order requirements and next steps using a defined set of panels, photographs and measurements.

PACKING QUESTIONS

Planning checks and packing with our team

Can you use our shipping marks?

Yes, send the wording, layout and order references. We review the proposed marks with the packing instructions and confirm the applicable format.

Can we request photos before dispatch?

Yes. Tell us which product, measurement, label and packing views you need. We agree the photo scope and timing with the order; photographs should be identifiable to the relevant pack or inspection sample.

Can you arrange an independent inspection?

Send the inspection requirements and proposed provider or arrangement. We discuss access, timing, sampling and responsibilities before confirming the schedule.

How do we choose packing for our order?

Start with the panel finish, dimensions, quantity and handling route. We help choose protection and labelling for the panels you are ordering. A decorated cut component may need different protection and labelling from a pack of raw full sheets.

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
MDF: 1 × 20′ GP container. Other panels: Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 7–10 days for MDF and 10–15 days for other panels; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

WORK DIRECTLY WITH OUR FACTORY

Prepare panels your receiving team can identify and handle.

Send the panel list, drawing or photo you have. We help choose protection, pack grouping and labels, then include the inspection records and receiving requirements in your order.

  • Panel list, drawing or photo and the quantities you have
  • Finished faces, visible edges and any sample reference
  • Inspection records, labels or grouping your team needs
  • Destination, unloading limits and required date

Email drawings, photographs or references to sales@plywoodsupplier.cn. Include your company name so we can connect attachments with your enquiry.

For an order in progress, include the order reference and the information you need us to review.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗