For concrete formwork
Choose film faced plywood or three-layer panels for your formwork application. We help bring the core, bonding requirement, thickness, surface and edge treatment into the panel specification.
OUR COMPANY & FACTORY
Our Plywood & MDF Factory in Xuzhou, China
Plywood and MDF made for the way you work.
We manufacture plywood and MDF substrates in our own factory in Jiangsu, China. Work with our team on panel selection, custom sizes and finishes, samples and export orders.
WHO WE ARE
Our factory, your panel project.
We are Xuzhou PanelSource Co., Ltd., registered in Xuzhou in 2008. We manufacture plywood and MDF substrates in our own factory in Jiangsu, China. Work directly with our team to choose the panel construction, plan custom processing and prepare your export order.
Start with the furniture, interior or formwork you want to make. We help connect the core or MDF grade with the visible faces, dimensions and workshop operations. If you already have a specification, send it with your quantities and destination; if you are still choosing, a sketch or reference photo is a useful first step.
- Company
- Xuzhou PanelSource Co., Ltd.
- Registered
- Xuzhou, 2008
- Our panels
- Plywood & MDF
- Contact
- sales@plywoodsupplier.cn
Visit our LinkedIn company page · Visit PanelSource on YouTube.
| Factory site area | 31,000 m² |
|---|---|
| Plywood production lines | 6 |
| MDF substrate production lines | 1 |
| MDF processing lines | 5 |
| Annual production capacity | 180,000 m³ across our operations |
Annual capacity describes our production capability across the factory. Order output and scheduling follow the selected product and processing requirements. Explore our production and quality checks.
OUR PANEL RANGE
Choose panels around what you are making.
For marine plywood, connect the construction and required product evidence with your intended use through our marine plywood order guide. Compare all eight families in the panel selection overview, or browse our plywood and MDF products.
FROM FULL SHEETS TO COMPONENTS
Choose the supply stage that fits your workshop.
Order plywood or MDF as production sheets, rectangular blanks or components with processing. Tell us what your workshop will do next so we can plan the material, dimensions, finish and packing around that handover.
Scroll sideways to read all columns.
| Supply request | Details we plan with you | Information from your workshop |
|---|---|---|
| Full production sheets | Construction, sheet dimensions, surface condition and protective packing. | Your cutting, coating or laminating process and the allowance it requires. |
| Rectangular blanks | Finished or oversize dimensions, face orientation, quantities and part labels. | Whether you will machine, edge or finish the blanks after receipt. |
| Components with processing | Drawing revision, feature locations, edges, finish and a representative sample scope. | Mating hardware, fit requirements and the datum used to measure each feature. |
A representative component helps us focus on the details that matter to you: an exposed plywood edge, a matched finish, machining allowance or clear part labels. Explore custom sizes, cutting and machining to prepare your part list, or bring the sketch you have and develop it with our team.
Use the document review to connect your proposed configuration with the production information and files your team needs. Use the document review worksheet.
FROM YOUR IDEA TO OUR PRODUCTION
Plan the panel and the work you need completed.
Bring the material, surface and processing requirements to one team. We turn your panel specification or component drawing into an order description covering the core, finish, thickness and supplied dimensions.
For decorative panels, we agree a physical reference and appearance range. For cut components, we work from the part list, units, grain direction and drawing revision. Our Customization & Services hub connects those choices with samples, finishing and delivery, while production checks and export packing cover protection, identification and receiving needs.
This page introduces our company, panel range and order support. Visit Production & Quality for factory equipment, production stages and product checks. Its production and shipment examples show panel handling, pack protection and container loading in our factory.
PEOPLE & EXPERIENCE
Practical experience with international panel orders.
Nancy is part of the team at Xuzhou PanelSource Co., Ltd. Contact Nancy and our factory team to discuss panel specifications, samples, custom production and export orders. Connect with Nancy on LinkedIn.
For a repeat order, share the previous order number and sample or decor reference, together with any changes to quantities, drawings, finish, documents or destination. These references help us carry the details you want to keep into the next quotation.
We publish plywood and MDF buyer guides under the PanelSource name, connecting material selection, panel construction, decorative finishes and export order preparation with our product ranges and production information. Explore our buyer guides.
COMPANY DOCUMENTS
Company & Sourcing Certificates
Find our management-system, chain-of-custody and product documents below. Each certificate shows its standards, scope and dates. For individual panel configurations, continue to the test and inspection reports.
Connect the supplier documents with your purchase.
The management-system documents cover the sales and associated activities stated in their scopes. For MDF orders, connect our substrate production and the agreed processing scope with the applicable product records, company and transaction details. The FSC claim must correspond to the applicable certificate scope and order records.
Request documents for supplier approval
- Share the panel construction, thickness, finish, application and destination with your required standard or document checklist.
- Tell us which management certificate, sourcing record, product report, performance declaration or order inspection record your team needs.
- We help identify the relevant company, product and document scope, and discuss copies and a validation route for your purchasing file.
Use our buyer document checklist to connect supplier certificates, product evidence and order records with the information your team needs.
ISO 9001:2015
Quality management · SCSQuality management covering the sales activities listed in the certificate.
ISO 9001:2015
Quality management · HDTDQuality management covering the stated panel sales scope, subject to surveillance.
ISO 14001:2015
Environmental management · HDTDPanel sales and the associated environmental management activities at the stated premises.
FSC® Chain of Custody
Purchase & sales · TÜV SÜD CzechWood-panel purchase and sales scope. The applicable FSC claim must be confirmed for each order.
ECM Compliance
EN 622-1:2013 · Voluntary verificationReview the listed products, thicknesses and CE-marking conditions in this compliance document.
OTC Conformity
EN 13986:2004+A1:2015 · Voluntary certificationDocument for the stated non-structural uses and product scope. Confirm applicability to your specification.
For an emission, fire, structural or other performance requirement, include the exact standard and intended end use. We match the document scope to the proposed board; one document does not cover every product in our range.
PANEL TESTS & ORDER INSPECTION
Product Test & Inspection Reports
Explore reports for marine plywood bonding, film and melamine-faced plywood, MDF emissions, plywood fire performance and a finished birch plywood order. Each card identifies the tested or inspected panel, the checks carried out and the related product. Open the PDF for the results, then use “View related product” to continue choosing that panel.
18mm Marine Plywood - BS1088 Test Report
- Panel
- 18mm marine plywood; 11 plies; 1220 x 2440mm
- Checks
- Dimensions, squareness and edge straightness - BS EN 324-1:1993 / BS EN 324-2:1993; Moisture content - BS EN 322:1993; Surface appearance and manufacturing checks - visual inspection; Bonding quality - BS EN 314-1:2004 / BS EN 314-2:1993; Density - EN 323:1993
- Issued by
- SGS-CSTC Co., Ltd.
- Date
- 2 July 2025
This report covers selected BS 1088-1:2003 tests for 18mm marine plywood with 11 plies and a 1220 x 2440mm panel format. It records Class 3 bonding quality under BS EN 314 testing and a density of 599 kg/m3. The document also reports dimensional tolerances, squareness, edge straightness, moisture content, surface appearance and manufacturing checks. Review the construction and test results alongside your project specification, then request the matching plywood configuration and procurement documents from PanelSource.
PDF · 3.1 MB · 10 pages
Hardwood Film Faced Plywood - SGS Test Report
- Panel
- Hardwood film faced plywood; tested piece 448.23 x 456.95 x 18.23mm
- Checks
- Bending strength and modulus of elasticity - GB/T 17657-1999; Surface bond strength - GB/T 15102-2006; Formaldehyde emission - GB 18580-2001 / GB/T 17657-1999
- Issued by
- SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.
- Date
- 24 October 2025
This SGS report covers hardwood film faced plywood, with a tested board thickness of 18.23mm. It records a bending strength of 54.7 MPa under GB/T 17657-1999 and a surface bond strength of 1.40 MPa under GB/T 15102-2006. The document also includes modulus of elasticity and formaldehyde testing, with the method and result shown together. Use it to review board strength and facing adhesion alongside your formwork specifications before requesting an order quotation.
PDF · 225 KB · 3 pages
18mm Melamine & Film Faced Plywood - SGS Test Report
- Panel
- 18mm natural hardwood plywood; A: melamine paper facing; B: film paper facing
- Checks
- Formaldehyde emission - GB 18580-2001 / GB/T 17657-1999; Internal bonding - GB/T 17657-1999 clause 4.8; Bonding quality - GB/T 17657-1999 clause 4.15; Peel performance after immersion - GB/T 17657-1999 clause 4.17; Impact resistance - GB/T 17657-1999 clause 4.44; Abrasion resistance - ISO 7784-2:1997
- Issued by
- SGS-CSTC Ltd.
- Date
- 12 January 2026
This SGS report examines two 18mm natural hardwood plywood configurations: A with melamine paper and B with film paper. Formaldehyde results are reported as 0.6 mg/L for A and 1.2 mg/L for B, with PASS recorded for both under the stated GB 18580-2001 method. Further sections cover internal bonding, bonding quality, peel performance after immersion, impact and abrasion. Compare the results for the facing you need when selecting panels for your furniture, interior or formwork order.
PDF · 2.2 MB · 7 pages
18mm MDF Formaldehyde Emission Report
- Panel
- 18 mm MDF; white colour board
- Checks
- EN 717-1:2004; Formaldehyde emissions; UV-Vis analysis
- Issued by
- SGS-CSTC
- Date
- 12 September 2025
Formaldehyde emission test for the 18 mm MDF board identified in the report as white colour MDF. SGS used a method with reference to EN 717-1:2004 and UV-Vis analysis. The recorded formaldehyde result is 0.080 mg/m³, with PASS shown in the result table. Use the report when reviewing MDF for furniture, cabinetry and interior panels, and send the thickness, surface finish and required documents with your enquiry.
PDF · 564 KB · 3 pages
HMR MDF Formaldehyde Emission Report
- Panel
- HMR MDF; green board
- Checks
- EN 717-1:2004; Formaldehyde emissions; UV-Vis analysis
- Issued by
- SGS-CSTC
- Date
- 13 November 2025
This SGS report covers formaldehyde emissions for HMR MDF and includes a photograph of the green board. Analysis was performed with reference to EN 717-1:2004 using UV-Vis. The formaldehyde result is 0.080 mg/m³, with PASS recorded in the table. For an HMR MDF order, share the thickness, decorative finish and intended application so our team can connect the report with the panel specification and other documents your buyer requires.
PDF · 587 KB · 3 pages
18mm Fireproof Plywood Fire Test Report
- Panel
- 18 mm plywood; 225 × 225 mm fire-test specimens
- Checks
- BS 476-6:1989+A1:2009; Fire propagation
- Issued by
- Intertek Testing Services Shenzhen Ltd., Guangzhou Branch
- Date
- 6 January 2026
Fire performance report for the 18 mm fireproof plywood identified by Intertek as Fire Retard Plywood. The board was tested to BS 476-6:1989+A1:2009 using three 225 × 225 mm specimens. The report records a fire propagation index of 18.87. Review the complete test method, result table and board photographs when specifying fireproof plywood for your project, then send the thickness, finish and required fire standard with your enquiry.
PDF · 1.0 MB · 5 pages
CP Birch Plywood Pre-shipment Inspection Report
- Panel
- CP full-birch plywood; 2500 × 1250mm; 21, 24 and 30mm
- Checks
- Board appearance and condition; Dimensions and thickness; Moisture content; Packing quantities, protection and pack dimensions
- Issued by
- ECQA
- Date
- 11 March 2025
This ECQA pre-shipment inspection covers CP full-birch plywood in 2500 × 1250mm sheets and 21, 24 and 30mm thicknesses. The report records an 80-board inspection and an overall PASS result. It includes checks of board condition, dimensions, moisture and export packing, with photographs of the panels and measuring equipment. Explore the accompanying inspection case, then share the grades, sizes and receiving requirements for your next birch plywood order.
PDF · 4.5 MB · 17 pages
17mm Melamine Slatwall MDF Pre-shipment Inspection Report
- Panel
- 17mm melamine faced slotted MDF; 8 × 4 ft; white and brown; matching aluminium channels
- Checks
- Order quantity and product identification; Workmanship and appearance; Dimensions, thickness and weight; Aluminium channel assembly
- Issued by
- HQC / China Inspection Service
- Date
- 17 October 2026
This HQC pre-shipment inspection covers 17mm melamine faced slotted MDF in an 8 × 4 ft format: 750 white panels, 230 brown panels and 6,000 matching aluminium channels. The report records an overall PASS result, with photographs of the finished panels, dimensional and weight checks, and channel assembly. The inspected selection comprised 30 panels and 170 channels; the eight-piece assembly check passed. Explore the order inspection case, then send your panel dimensions, slot layout, finish and quantity for a quotation.
PDF · 4.8 MB · 14 pages
Personal details and report references are hidden in the downloadable copies. Contact our team for the documents needed by your purchasing department.
Bring the report into your order discussion.
Share the report or product that interests you with your board specification, application and destination. We help connect the relevant test and inspection records with the documents your purchasing team needs. For a worked example, explore the CP birch plywood pre-shipment inspection.
Get documents for my orderPLAN A VISIT OR REMOTE DISCUSSION
Make your factory discussion useful for the project.
Choose the panel and process
Bring the product reference or component you want to make. We can discuss the plywood core or MDF grade, facing and finishing, and the production stages relevant to your panel.
Compare samples and appearance
Share the colour or veneer reference and mark the visible faces on your drawing. Include the finishing method and the sequence of adjacent panels when the appearance needs to carry across several parts.
Plan inspection and receiving
Tell us the checks and records your team needs, together with unloading or storage requirements. We connect these with the production, pack protection and identification for your order.
For an on-site visit, email the people attending, preferred dates and products before making travel arrangements. For a remote discussion, send labelled photographs and a short question list. Include your company details and any quotation reference so the team can prepare around your project.
Explore production stages and panel checks · Prepare your quotation details
WORKING WITH OUR FACTORY
Questions about our plywood and MDF factory
How do you supply plywood and MDF?
We manufacture plywood and MDF substrates in our own factory in Jiangsu. Work with our team to choose the grade, surface and dimensions, along with any finishing or component processing for your order.
Which production and processing stages should we confirm?
Tell us whether you need full sheets, decorative panels or components with cutting, edging or machining. We include the material identity, supplied stage and processing scope in your quotation. The production photographs and process descriptions shown here cover plywood operations. We also manufacture MDF substrates in our own factory; ask our team for production information relevant to your MDF panel.
Can we discuss a custom panel or component?
Yes. Send a drawing, material reference, quantity and destination. We help develop the custom dimensions, decorative surfaces, machining and packing, then plan samples and pricing around your specification.
Can we arrange a factory visit or discuss production remotely?
Email your company details, the products you want to discuss and your preferred timing. We arrange the relevant production information with you and confirm the visit details before you make travel plans. A remote discussion can start with labelled photographs and your questions.
Where can I see your production and packing?
Our Production & Quality page contains factory photographs, production videos and product-specific inspection guidance. Explore the stages that interest you and tell us which panel or order you are planning.
SAMPLES & ORDER PLANNING
Plan the first order.
- Samples
- Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
- Order quantity
- MDF: 1 × 20′ GP container. Other panels: Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
- Production
- All products are made to customer order. Production takes 7–10 days for MDF and 10–15 days for other panels; the order confirmation records the start date and production schedule. Sea transit is additional.
- Payment
- Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
- Shipping
- Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
- After-sales warranty
- All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.
Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.
WORK DIRECTLY WITH OUR FACTORY
Plan your next panel order with our factory team.
Start with the panel specification, drawing or project idea you have. We help bring the material, custom processing, samples and export requirements into your order.
- Your application, panel specification or drawing
- Thickness, dimensions, quantity and visible faces
- Custom processing, samples and required documents
- Packing, delivery destination and order timing
Email drawings, photographs or references to sales@plywoodsupplier.cn. Include your company name so we can connect attachments with your enquiry.
For an order in progress, include the order reference and the information you need us to review.