PLYWOOD & MDF · CHINA
OUR FACTORY · PRODUCT DETAILS
Clean white furniture parts. A fit built around 12mm.
Give framed inserts, dividers and supported furniture backs a coordinated white finish. Our factory supplies 12mm melamine MDF in 2400 × 1200mm sheets, with cutting, matched edging and component preparation around your drawing.
Order full sheets, cut blanks or prepared components around your furniture drawing.
CONSTRUCTION & SUPPLY CONDITION
| Nominal thickness | 12mm; actual finished thickness and acceptance tolerance identified for the selected construction |
|---|---|
| Sheet format | 2400 × 1200mm for this 12mm configuration; quote requested alternatives separately |
| Nominal area and board volume | 2.88m² and 0.03456m³ per 2400 × 1200 × 12mm sheet |
| Panel construction | White melamine decorative surface on MDF; specify the required substrate grade |
| White face and reverse | Physical or coded white reference, texture, sheen and visible-face requirements |
| Supply options | Full sheets, cut blanks or components with the cutting, edging and machining included in the order |
| Component dimensions | Identify sawn blank, edge-ready core or finished size, with net edge build-up and pre-milling removal |
| Cutting layout | Use the supplied sheet with outer trims, kerf, useful-part allowance and permitted rotation |
| Receiving frame | Actual groove width, finished panel thickness, groove depths, engagement and installation sequence |
| Hardware and exposed MDF | Fittings suited to the 12mm construction; specify penetrations, edge distances and treatment of machined openings |
| Sample and inspection | White edged corner and relevant frame or hardware trial; retain finish, material, dimension and drawing references |
| Documents and packing | Connect required performance documents to the selected construction; identify quantity, part labels and packing groups |
Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.
12MM WHITE MDF · 2400 × 1200MM SHEETS
Choose 12mm white melamine MDF for fitted inserts, dividers, supported backs and other interior furniture components. PanelSource manufactures the MDF substrate in our own factory and supplies this configuration in 2400 × 1200mm sheets. Bring your white reference and component drawing; we can prepare the face, reverse, finished edges and factory work around your design.
For this thinner panel, the receiving frame and hardware deserve attention alongside the colour. A finished sample brings the white corner, actual thickness and assembly fit together, so your designer, buyer and workshop can approve the same component.
| You need | Factory supply | Send us |
|---|---|---|
| Sheets for your own processing | 12mm white melamine MDF in the selected format and face/reverse | White reference, MDF requirement, quantity and cutting direction |
| Blanks for an insert or divider | Cut parts with the white face and component identity marked | Blank dimensions, quantities and the edging or fitting work to follow |
| Prepared furniture components | The cutting, edging and machining included in the order | Finished sizes, edge schedule, groove or hardware detail and packing groups |
THE WHITE FACE, REVERSE & FINISHED EDGE
A white cabinet interior, frame and shelf can have different undertones or sheen. Send a decor code, existing panel or physical target, then compare the actual white melamine MDF beside its edge band and adjoining materials. Choose the texture and gloss with the colour, under the lighting where the furniture will be used.
A bonded and trimmed edge shows the joint line, radius and end connection your customer will see. Select the band material, white tone, texture, width and thickness with the adhesive and trimming process. Compare the appearance after those operations, not only as a loose strip.
An open divider shows both sides, while a supported back may have a different visible-face requirement. Keep the primary face and reverse on the component schedule, including which side is presented to the room or cabinet interior.
Cutting or routing exposes the MDF core beneath the white face. Add the edge, coating or cover needed for visible recesses and openings. If your existing part uses particleboard, plywood or a painted finish, send a section or edge photograph so the quoted construction follows the material your furniture needs.
Use the melamine MDF colour and finish guide to coordinate white with adjoining woodgrain or coloured panels. Retain the accepted physical board-and-edge reference with the decor, texture and order, especially for replacement parts or staged deliveries.
FITTED INSERTS, DIVIDERS & SUPPORTED INTERIOR PANELS
Show the visible opening, groove width and depth, retaining detail and assembly sequence. The insert needs both clearance across its thickness and sufficient engagement within the frame.
Identify the exposed faces, free edges and fixing arrangement. Include unsupported dimensions and any bracing duty in the full furniture assembly, rather than choosing the board from its appearance alone.
Use the actual box, bottom or insert drawing with the runner and retention system. Keep grooves, support and visible fronts with the corresponding part sizes and hardware.
Provide the frame or supports, joints and mounting detail. For shelves, include span, depth, contents and load duration. For an installation with a fire or other project requirement, include that requirement with the proposed construction.
Combine thinner inserts with the other boards in your furniture range while keeping each thickness and fixing detail identifiable. Our furniture component guide covers the part schedule, machining stage and labelled sets for those mixed orders.
PLAN WITH THE SHEET YOU WILL RECEIVE
One nominal 2400 × 1200mm sheet has an area of 2.88m² and a rectangular board volume of 0.03456m³ at 12mm. These figures describe the nominal board; packed shipment dimensions and mass depend on the supplied construction and packing.
If your workshop needs 2440 × 1220mm or another format, include it in the enquiry before using that size in the cutting schedule. The supplied sheet, finished thickness, MDF grade and white face/reverse belong together in the quotation.
| Sheet format | Listed thicknesses | For a 12mm enquiry |
|---|---|---|
| 2400 × 1200mm | 9, 12, 16, 18, 25 and 32mm | Includes the configuration on this page |
| 3600 × 1200mm | 16, 18, 25 and 32mm | Request the longer 12mm combination separately |
| 3600 × 1800mm | 16 and 18mm | Request the wider 12mm combination separately |
Send the component sizes and the format that suits your equipment. We can develop a custom request without carrying a thickness from one listed format into another.
TRIM, SAW KERF & FINISHED-PART ALLOWANCES
Derive the sawn blank from the finished part, including pre-milling, edging and later trimming. Fit those blanks into the 2400 × 1200mm sheet after outside trims and saw kerfs. A layout that fits a larger 2440 × 1220mm sheet can lose a complete cutting position on the smaller format.
White has no printed woodgrain, but a directional texture or reflection can still affect adjoining parts. Compare the proposed orientations on the actual finish before combining them in a visible group. Mark allowed rotations and part identities on the cutting schedule.
Round the sheet quantity for each material configuration and include the reserves your production needs. Keep usable spare components separate from narrow trims or damaged offcuts. We can compare the sheet format and factory processing around your actual part list, without treating a geometric layout as a guarantee of production yield.
ACTUAL THICKNESS & RECEIVING WIDTH
Specify the receiving groove or channel around the actual finished panel thickness and the required assembly action. Include the measurement stage and tolerance needed for the selected construction. A nominal 12mm panel and a nominal 12mm groove do not by themselves describe a workable sliding or captured fit.
Total thickness clearance = actual receiving width − finished panel thickness. This is the total gap across the joint, rather than a separate allowance at each face. Include any coating or lining that changes the receiving width or the panel thickness.
Check the limiting combination of the narrowest receiving width and greatest accepted panel thickness. Trial the actual insertion path: groove variation, burrs, local bow and surface condition can affect movement even where the arithmetic clearance is positive. Keep the chosen gasket, clip, adhesive or other retention detail with the trial.
CLEAR OPENING, GROOVE DEPTH & RETAINED ENGAGEMENT
Groove width receives the board thickness; groove depth determines how far the insert enters the frame. Show both on the drawing. A panel cut only to the visible opening may have the right thickness but too little overlap to remain retained.
For each overall dimension, start with the clear opening plus the two opposing groove depths, then subtract the specified total end clearance. Include any edge finish in the final insert size. Review the retained engagement when the panel is off-centre as well as when centred, with movement control suited to the assembly.
Show how the insert is installed. It may be captured as the frame is assembled or held by a removable retaining element. A finished component trial lets the workshop assess insertion, surface protection, retention and the visible joint together.
CUTTING, EDGING & EXPOSED MDF
Trial the selected tooling, support and feed on the actual panel. Inspect entry and exit edges, corners and the reverse where it is visible. Check again after edge preparation and trimming, because small chips can show beside a pale face or joint line.
The sawn blank, edge-ready core and finished component have different sizes. Subtract the net edge additions from the final size to define the prepared core, then add the material removed by pre-milling to establish the blank. Use the completed process to determine net build-up.
Identify the edges, slots, holes and recesses that expose MDF beneath the melamine face. Include their band, coating, cover or protection in the drawing, with final clearances checked after finishing.
Approve bond and appearance on a finished corner. Retain the edge material, adhesive, white reference and accepted trimming setup with the sample so the workshop can repeat its joint line and radius. If extra trimming removes a damaged area, account for that removal before the part reaches its final size.
HARDWARE THAT FITS THE 12MM COMPONENT
Use the hardware drawing with the actual panel-thickness limits. The same recess leaves 6mm less nominal material in a 12mm board than in an 18mm board. Carry the thinner-panel fitting detail into the component trial rather than retaining an earlier drilling programme unchanged.
| Feature | Include in the check |
|---|---|
| Blind recess or hinge fitting | Minimum accepted board thickness, deepest penetration, drill-point projection and any opposing cut |
| Screw or connector | Actual penetration into MDF, edge distance, pilot hole, thread engagement and installation instructions |
| Supported shelf or moving part | Span, loading, supports, connection forces and the operation of the assembled component |
A positive geometric remainder alone does not establish fitting strength or prevent face marking. Trial the selected connection in the board and support arrangement. A thinner-panel fitting, a different mounting detail or 18mm white melamine MDF can provide alternative routes around the furniture duty.
APPROVE THE WHITE FINISH AND THE REAL FIT
| Your decision | Useful sample | What to compare |
|---|---|---|
| Choose the white and reverse | Actual faced MDF beside the proposed edge and adjoining material | Undertone, texture, sheen and both visible faces |
| Approve cutting and edging | Processed white corner from the selected construction | Cut quality, joint line, radius and finished dimensions |
| Approve the insert or fitting | Representative component in its receiving frame or actual hardware | Thickness clearance, engagement, insertion path and operation |
Keep the accepted decor, MDF, actual thickness, edge and drawing revision with the sample. Add a cutting trial at the supplied format when useful part yield is important to the purchase. A protected finish reference and a separate processing piece let you retain the chosen white while the workshop trials the operations.
BOARD DOCUMENTS, SURFACE CHECKS & COMPONENT ACCEPTANCE
Identify the selected MDF grade, white decor, reverse, actual thickness limits and supplied format with the order. Add the destination’s emission or other product requirements. For waterproof or fireproof furniture, include the core, finishing and installation requirement with the white appearance you want.
You can review our published 18mm white MDF formaldehyde report · PDF in the product-document collection. Its results cover the 18mm specimen identified in that report. For your 12mm purchase, send the MDF grade, facing and destination so we can provide the applicable document scope for the selected construction.
| Supplied stage | Check and record |
|---|---|
| Sheet and decorative surface | 2400 × 1200mm or the ordered alternative, actual thickness, primary/reverse identity, white match and surface condition |
| Cut and edged component | Named dimensional stage, squareness, flatness with the stated support, cut quality and completed edge |
| Frame or hardware assembly | Actual receiving width, retained engagement, insertion or fixing, and visible face condition after assembly |
| Packing and repeat supply | Quantity per part, decor/material reference, drawing revision, batch labels and identified spares |
We can arrange the agreed production photographs, dimensional records and inspection for your order. Request documents for your 12mm configuration or review our production inspection scope.
SHEETS OR PREPARED WHITE FURNITURE PARTS
Send a furniture photograph, drawing or cutting list with quantity and destination. Include the 2400 × 1200mm format or your requested alternative, MDF requirement, white reference and reverse. For prepared parts, identify the blank or final size, edges and receiving groove or hardware detail.
Email drawings and finish references to sales@plywoodsupplier.cn using the same company and project name as your enquiry. The quotation brings the selected board, supplied operations and sample plan together with the quantity and delivery arrangements.
Keep staged deliveries coordinated with the accepted white and adjoining-component references. Label useful spare parts by size, edge and machining identity. For a plywood core, compare white melamine plywood; for prepared dimensions, explore our custom-size service.
PLAN YOUR PANEL ORDER
Bring the panel, edge and adjoining furniture together on a finished sample. Choose full sheets or prepared components, with the white reference, actual fit and supplied operations kept in one order.
12mm White Melamine MDF
Our MDF substrate production. We manufacture MDF substrates in our own factory in Jiangsu, China. Talk to our factory team about the board and finish for your components.
A white corner or fitted furniture component
Start with the decision that matters: white and edge matching, cutting quality or the actual receiving frame and hardware. A finished corner or representative component keeps the trial close to the furniture you will make.
Review this product’s sample planFor a quotation, add your quantity, destination and required timing. You can start with the details you already have.
PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/12mm-white-melamine-mdf/
sales@plywoodsupplier.cn
SAMPLES & ORDER PLANNING
Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.
DOCUMENTS & ORDER SUPPORT
We help your purchasing team gather product reports, inspection records and packing documents for your order.
Product reference: 12mm White Melamine MDF — specification.
Share the material, thickness and test standard your project requires. Our factory team will help you select the product reports and documents for your purchase.
We can plan production and inspection around your panel specification, with dimensional checks, recorded readings and packing photographs for your order.
Plan the inspection scopeWe prepare packing details, pack quantities and dispatch documents for your order. Share the destination and receiving requirements so our team can help plan delivery.
Review the delivery scopeStart with your application or panel reference. Our team will help with the specification and documents.
PRODUCT-SPECIFIC QUESTIONS
This configuration uses 2400 × 1200mm sheets. Each nominal sheet is 2.88m² and 0.03456m³ at 12mm. Send another requested format with the component dimensions and quantity so the cutting plan and quotation follow the same supply combination.
Send the longer size you need. In the wider listed range, 3600 × 1200mm pairs with 16, 18, 25 and 32mm, while 3600 × 1800mm pairs with 16 and 18mm. A longer 12mm request is quoted as its own combination.
Rotation can improve a layout where the selected texture, reflection and component design allow it. Compare both orientations on the actual finish before rotating adjoining visible parts, and use the supplied format with trimming and saw kerfs.
Use actual finished panel thickness and receiving width to set the fit. Total thickness clearance is the receiving width minus panel thickness. Include coatings or liners and trial the actual insertion path, retention and surface protection.
Use the clear opening, opposing groove depths and required total end clearance in each dimension. Include the finished edge and check retained engagement when the panel is off-centre. The installation sequence determines how the completed insert can enter the frame.
Identify the dimensional stage first. Subtract net edge additions from the final part size for the edge-ready core, then add pre-milling removal to determine the sawn blank. The quotation can cover sheets, blanks or completed edged components.
Review its drawing and installation instructions for the selected 12mm construction. Check minimum board thickness, deepest penetration, drill-point projection, edge distances and opposing cuts. Trial the actual connection and furniture support before keeping the same drilling programme.
Compare the white tone, texture and sheen on a bonded, trimmed corner beside the adjoining furniture. Include the primary face and any visible reverse. Keep the accepted panel-and-edge reference with production and repeat orders.
Specify the MDF grade, white facing, destination and required performance with the order. The published 18mm white MDF formaldehyde report covers its identified 18mm specimen; request the applicable document scope for your selected 12mm construction.
Send the white reference, part sizes or drawing, quantity and destination. For a fitted component, include the edges, receiving frame or hardware. Choose a white finished corner or representative assembly sample, then quote the sheets or factory processing needed for your order.
CONTACT OUR FACTORY
Send a drawing, part list or furniture photograph with the quantity and destination. Include the white reference and any edge, groove or hardware detail; we’ll prepare the sheet or component supply around it.
Have a furniture photo or drawing? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.
Tell us your panel, dimensions, quantity and destination port.
