PLYWOOD & MDF · CHINA

15mm Bintangor Plywood — product photographView product photograph

OUR FACTORY · PRODUCT DETAILS

15mm Bintangor Plywood

Bring the warm wood face into a finished, matched furniture set.

Build cabinet fronts, furniture frames and interior components with the Bintangor appearance your customers will see. Our factory supplies calibrated 15mm plywood, cut blanks and processed parts around your assembly. Send a cabinet detail, part photo or finish reference; we can help coordinate the core, edging, fittings and matching faces, then develop a finished sample and quotation.

Calibrated thickness
15mm ±0.3mm
Decorative face
Bintangor veneer
Supply formats
Sheets / blanks / finished parts

Available to order · 10–15 days production · Container shipping

TECHNICAL DATA · TDS-PS-01 · Rev 2.0 (Oct 2026)

15mm Bintangor Plywood technical data

Our 15mm Bintangor-faced plywood brings a warm wood surface to furniture components and interior work. Choose the face/reverse pairing, core and finished size together. At the transport-table planning density of 550 kg/m³, a 1220 × 2440 × 15 mm sheet weighs about 24.6 kg; the selected core determines the shipment weight.

Declared values from our technical data sheet TDS-PS-01, Rev 2.0 (Oct 2026). The values for your order are confirmed in the quotation.
Harmonized System (HS) Code4412.33 / 4412.39
Reference StandardsEN 636-1 / EN 636-2, EN 314-2 (Class 1 / Class 2), EN 13986, ANSI/HPVA HP-1, GB/T 9846
Intended exposure / EN 636 classDry interior (EN 636-1) or humid interior (EN 636-2)
Decorative Face / ReverseBintangor decorative face (0.30–0.65 mm); Bintangor reverse or another reverse material specified with the face/back pair
Surface Appearance GradeB/BB, BB/CC, or C/D (per EN 635-2 / ANSI HP-1)
Core Veneer Species100% Poplar (Populus spp.), Combi (Poplar + Eucalyptus), or 100% Eucalyptus
Core Lay-up ConstructionCross-grained rotary-cut veneers, two-time hot pressing and calibration; veneer thickness and ply arrangement selected for the finished panel
Adhesive SystemUrea-formaldehyde (UF) or melamine-urea-formaldehyde (MUF), with the required emissions formulation specified for the order
Surface FinishingDouble-sided belt calibrated and fine sanded (120#–180# grit)
Standard Sheet Sizes1220 × 2440 mm (4' × 8'), 1250 × 2500 mm, 915 × 2135 mm (Door size)
Length & Width Tolerance±1.0 mm (EN 315)
Thickness Tolerance (Calibrated Sanded)≤ 6 mm: ±0.2 mm | 9–15 mm: ±0.3 mm | ≥ 18 mm: ±0.4 mm (EN 315)
Squareness (Diagonal Difference)≤ 1.0 mm / m (Max 2.0 mm per 1220×2440 sheet) (EN 324-2)
Edge Straightness Tolerance≤ 1.0 mm / m (EN 324-2)
Panel Flatness / Bow / Warp18 mm series reference: ≤ 3.0 mm / m (EN 315). For 15 mm components, specify the flatness limit, support arrangement and measuring condition with the order.
Core Void & Overlap LimitNo core overlaps; maximum edge pin-gap ≤ 2 mm for the selected furniture construction
Core-specific properties for Bintangor-faced plywood
Density (Poplar / Combi / Eucalyptus Core), kg/m³500–540 / 560–610 / 620–660
Test method: EN 323 / ASTM D2395
Moisture Content at Dispatch, %8.0–12.0% for the dried furniture-processing configuration; choose the delivery moisture range with the order.
Test method: EN 322 / ASTM D4442
Bending Strength — Longitudinal (MOR //), MPa (N/mm²)≥ 35.0 (Poplar) / ≥ 45.0 (Combi)
Test method: EN 310
Bending Strength — Transverse (MOR T), MPa (N/mm²)≥ 24.0 (Poplar) / ≥ 32.0 (Combi)
Test method: EN 310
Modulus of Elasticity — Longitudinal (MOE //), MPa (N/mm²)≥ 4,200 (Poplar) / ≥ 5,500 (Combi)
Test method: EN 310
Modulus of Elasticity — Transverse (MOE T), MPa (N/mm²)≥ 3,000 (Poplar) / ≥ 4,100 (Combi)
Test method: EN 310
Bonding Quality (Shear Strength), MPa≥ 1.0 (Class 1 Dry / Class 2 Humid)
Test method: EN 314-1 / EN 314-2
Screw Holding Capacity — Face / Edge, N≥ 1,350 (Face) / ≥ 950 (Edge)
Test method: EN 320 / ASTM D1037
Thickness Swelling (24h Cold Water), %≤ 10.0 (MR MUF Bond)
Test method: EN 317
Formaldehyde release — E1, mg/m³≤ 0.124 mg/m³ · EN 717-1
Formaldehyde release — TSCA Title VI / CARB P2 option, ppm≤ 0.05 ppm · ASTM E1333
Thickness, ply count, weight and container loading
Nominal Thickness Ply Count Area Weight Sheet Weight (1220x2440) Est. Load / 40HQ
3 mm3 plies1.65 kg/m²4.9 kg~5,374 pcs
3.6 mm5 plies1.98 kg/m²5.9 kg~4,479 pcs
5.2 mm5 plies2.86 kg/m²8.5 kg~3,100 pcs
6 mm5 plies3.30 kg/m²9.8 kg~2,687 pcs
9 mm7 plies4.95 kg/m²14.7 kg~1,791 pcs
12 mm9 plies6.60 kg/m²19.6 kg~1,343 pcs
15 mm11 plies8.25 kg/m²24.6 kg~1,074 pcs
18 mm13 plies9.90 kg/m²29.5 kg~895 pcs
21 mm15 plies11.55 kg/m²34.4 kg~767 pcs
25 mm17 plies13.75 kg/m²40.9 kg~644 pcs

For calibrated 15mm supply, the table uses ±0.3 mm. Keep any later coating or machining allowance with the finished-component dimensions. Weight and container quantities use 1220 × 2440 mm sheets, a 550 kg/m³ transport-planning density and approximately 26.4 tonnes of net panels. These are loading calculations; the core-specific density ranges above, packing and route payload limits determine the final shipment.

For another decorative face, compare Okoume-faced plywood, poplar plywood or our decorative plywood range. Bintangor remains the face specified on this product page.

Order options for 15mm Bintangor Plywood

Sizes, finishes & supply requirements

CONSTRUCTION & SUPPLY CONDITION

Our product configuration and order requirements
Nominal panel thickness15mm overall plywood panel, with supplied and final component dimensions identified.
Calibrated sanded thicknessTDS-PS-01: ±0.3mm at 15mm, giving 14.7–15.3mm at the calibrated supply stage.
Standard sheet sizes1220 × 2440mm, 1250 × 2500mm and 915 × 2135mm; custom sizes and cut components by enquiry.
Supply scopeSanded sheets, rectangular blanks, drilled or routed parts, and edged or finished components with included operations stated.
Face and reverseBintangor decorative face with Bintangor or another selected reverse; visible surfaces, repairs and veneer joints agreed.
Core selectionPoplar, poplar/eucalyptus combi or eucalyptus. Another named hardwood or combination can be specified separately for the order.
Core-specific densityPoplar 500–540kg/m³; combi 560–610kg/m³; eucalyptus 620–660kg/m³.
Layup and loading referenceThe 15mm transport-table configuration lists 11 plies and about 24.6kg per 1220 × 2440mm sheet at 550kg/m³. Actual shipment follows the selected core and packing.
Moisture and surface8–12% for the dried furniture-processing configuration; double-sided calibration and fine sanding, with further finishing specified.
Appearance and matchingColour range, grain direction, repairs and the selected same-sheet, coordinated-pair or veneer-sequence relationship.
Dimensions and flatnessComponent outline, squareness and finished limits on the drawing; 15mm flatness acceptance includes support and measuring conditions.
Edging and finishEffective finished edge build-up, any pre-milling, coating, reverse treatment and dimensions at each supplied stage.
Hardware and datumsExact fitting, reference face, raw or finished datum, left/right drilling, pocket depth and opening movement.
Bond and technical requirementsAdhesive, bonding duty and core-specific directional properties selected with the intended exposure and assembly.
Documents and sampleRequired emissions, sourcing and product records linked to the selected construction; fitted pair or connection sample with drawing revision.
Quantity and packingSheets, blanks or accepted pairs/sets; part codes, matching groups, face protection, pack sequence, destination and delivery date.

Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.

15MM BINTANGOR · MATCHED FURNITURE & INTERIOR PARTS

Choose the warm face and construction for your finished part

Bring the Bintangor wood face to cabinet fronts, furniture frames and interior joinery. Our factory can supply 15mm Bintangor-faced plywood as sheets, cut blanks or processed components, with the core, reverse and finish selected around the part you are making.

Start with the surfaces your customer sees. Choose the colour range, grain, permitted repairs and veneer joints for the front and reverse, then include the exposed, banded or concealed edges. For adjoining fronts, select the matching relationship with both parts under the intended coating.

Select the calibrated panel and core

The calibrated technical-data configuration is 15mm ±0.3mm, giving 14.7–15.3mm before separately specified coatings or later machining. Choose poplar, combi (poplar/eucalyptus) or eucalyptus core, keeping the layup and machined-edge requirements with the selected faces.

Compare the same machined part and finish across the quoted core options
Core optionKeep explicitCompare on the component
PoplarSelected poplar construction, core joints and calibrated thickness.The same connector installation, exposed edge and complete assembly trial.
EucalyptusSelected eucalyptus construction and calibrated thickness.Machined-hole condition, edge preparation, measured mass and attachment.
Other named hardwoodSeparately quoted species or mix with its own layup, density and order data.The actual cut section, machining result and joint under the intended duty.
Combi (poplar/eucalyptus)Poplar and eucalyptus arrangement, including the veneer layers exposed by machining.The locations exposed by drilling, rebates, profiling and edge treatment.

Use the same component, fitting and finish to compare cores. Inspect the cut edge and connector installation, then review the complete assembly. Another named hardwood construction can be quoted separately with its own order data.

Standard formats are 1220 × 2440mm, 1250 × 2500mm and 915 × 2135mm, with cut sizes by enquiry. Choose the format alongside grain direction, matching groups and machining allowance.

Explore the Bintangor plywood range, or compare 12mm and 18mm components for another section. Bring the receiving joint and fitting into that choice so the new thickness follows the assembly dimensions.

SHEETS, BLANKS OR FINISHED COMPONENTS

Choose the work your workshop wants supplied

Compare quotations at the same processing stage, with dimensions attached to that stage. A front before edging and the completed front have different outlines even when they belong to the same cabinet.

The same outside size can describe a different supply scope
Supply stageDimensions describeDefine separately
Sanded full sheetThe supplied sheet and accepted finished thickness.Trim allowance, face selection, grain direction and downstream processing.
Rectangular blankThe substrate before any specified edging or later profiling.Added edge build-up, final size, datum and operations still required.
Drilled or routed componentA part at the drawing revision and stated processing stage.Hole references, handed parts, fitting preparation and exposed core acceptance.
Edged or finished componentThe agreed final component envelope after included operations.Coating and edge reference, mating fit, appearance groups and packing sequence.

List the cutting, drilling, calibration, edge treatment and coating included in the order. Add any requested fittings or installation work as separate items, then record the remaining workshop operations with the delivered part dimensions.

FRONTS, CARCASSES & FRAMED INTERIOR PARTS

Build the selection around its place in the assembly

Cabinet doors and furniture fronts

Identify inset or overlay mounting, finished sizes, edging and fittings. Develop left and right fronts together, including the meeting edges, matching faces and movement through the required opening range.

A sample pair combines the closed-door reveals with hinges, handles and adjoining furniture. Review the reverse where it remains visible when the door opens.

Carcass parts and furniture frames

Separate through-members from parts fitted between them. Include connectors, rebates, back grooves, service holes and supports when translating the outside furniture size into cut parts.

Choose visible inside and outside faces independently. Keep the selected construction and joint detail with the drawing for repeated modules.

Screens, partitions and access panels

Send the supporting frame, joints, perimeter and fixing layout. Develop removable panels with their grip, access route and repeated-use requirements, including the finish on edges exposed during removal.

Where the complete assembly has a fire, acoustic or structural requirement, identify that specification with its component, finish and installation scope.

Joinery infill and protective components

Show the receiving frame, contact face and fastening arrangement. For protective packing, add the goods, cushioning, supports and handling needs to the brief.

For an interior door, identify the plywood infill or facing and the complete door requirements. The supplied component, bond and finish can then be selected around that construction.

EDGE BUILD-UP, PRE-MILLING & THE DRILLING DATUM

Size the substrate from the finished edge

Label the plywood substrate and the completed component separately. Pre-milling removes material; edging and its bond line add material. Use the effective finished addition at each edge when deriving the substrate entering the edging line.

Substrate width = finished width − left build-up − right build-up

For a 382 × 686mm finished front with 0.8mm effective build-up at every edge, the substrate is 380.4 × 684.4mm. The build-up includes the finished edge material and relevant bond-line contribution.

If pre-milling removes 0.5mm from each edge, restore that stock to the earlier saw-cut size: 381.4 × 685.4mm, before any further process allowance. These dimensions use the stated edging and removal inputs.

Same 382 × 686mm finished front; no pre-milling in these three rows
Effective addition per edgeSubstrate widthSubstrate heightFinished check
0.5mm381mm685mmAdd 1mm to each overall dimension
0.8mm380.4mm684.4mmAdd 1.6mm to each overall dimension
1.0mm380mm684mmAdd 2mm to each overall dimension

Carry the same datum into drilling

For a drawing coordinate 40mm from the finished left edge, 0.8mm effective edging with no later pre-milling puts the hole centre 39.2mm from the substrate edge. Drilling 40mm from the substrate instead places it 40.8mm from the finished edge. Select the actual hole position from the fitting drawing, then apply this coordinate conversion to its stated datum.

Mark the reference face, datum and left/right identity. Show whether the view is from the face or reverse so the handed drilling pattern follows the correct front. Use the edge-material and machinery suppliers' process instructions with the accepted finished corner.

CALIBRATED MEMBER THICKNESS & CLOSED-DOOR REVEALS

Size an inset pair from the cabinet opening

Use an 800mm outside cabinet width and 720mm outside height, with 15mm sides, top and bottom. With no face frame, centre partition or additional lining, the unobstructed opening is 770 × 690mm.

Read the worked detail and calculations

Select 2mm gaps at the left, centre and right. Each finished front is (770 − 2 − 2 − 2) ÷ 2 = 382mm wide. With 2mm top and bottom gaps, its height is 690 − 2 − 2 = 686mm. This cabinet layout uses those selected reveals; choose the production gaps with the actual fitting, edge profile, movement and assembly limits.

Two 382 by 686mm inset fronts in an 800 by 720mm cabinet with exact 15mm membersPaired inset fronts800mm outside widthLeft front382 × 686Right front382 × 686720mm outside height15mm members · 2mm selected gapsFront elevation; all dimensions in mm
Finished fronts in their cabinet openingThe carcass, opening and fronts use one scale. Pale gaps show the selected 2mm reveals at nominal 15mm member thickness; include the fitting and opening movement in the finished assembly.

Keep three dimensions on the component schedule

Assembly: 800 × 720mm outside envelope, with member thickness and the unobstructed opening identified.

Finished front: two 382 × 686mm parts, with their reveals and handed hardware.

Substrate: 380.4 × 684.4mm with 0.8mm effective edging on every side and no pre-milling.

Use the size for the stage being supplied. Adding edging to a 382 × 686mm raw blank would enlarge the finished front.

Include the calibrated bare-panel range

The 14.7, 15.0 and 15.3mm member values below are the lower limit, nominal thickness and upper limit of the calibrated 15mm ±0.3mm configuration. Hold the cabinet outside size at 800 × 720mm and the finished fronts at 382 × 686mm. The calculation isolates the effect of equal bare-panel member thickness; additional member coatings and other dimensional variations are separate inputs.

Equal members; no other size variation or obstruction included
Calibrated member thicknessOpening width × heightThree width gaps if equalTop/bottom gaps if equal
14.7mm770.6 × 690.6mm2.2mm each2.3mm each
15.0mm770 × 690mm2mm each2mm each
15.3mm769.4 × 689.4mm1.8mm each1.7mm each

The remaining space is divided equally across the stated gaps. Add actual squareness, front-size variation, member position and hardware movement to the assembly plan. Where the sides differ, use each member's dimension when determining the opening rather than the equal-member calculation.

THE FITTING, PREPARATION & OPENING MOVEMENT

Develop the hardware connection in the selected core

Use the exact fitting model with the permitted panel material, minimum thickness and preparation dimensions. Start with the calibrated bare-panel limits, then include later finishing or machining in the completed front.

Locate the deepest cut and fixing

Show the hole pattern, pocket, insert and countersink on one drawing. Include any drill point or opposite-face machining that extends beyond the simple recess view, with nearby rebates and edges located from the same datum.

Fit the actual hardware to the selected core. Review the local cut section, fixing installation and use in the complete supported assembly.

Review the opening path

Identify inset or overlay mounting, plate position, edge profile and adjacent front or side. Include handles, internal drawers and projecting parts in the required movement.

Choose the reveal using the fitting system's planning information and assembled limits. Review the gap through opening as well as in the closed position.

Plan fitting quantity and position using the hardware manufacturer's criteria, actual front dimensions, completed mass and intended duty. Include added facings, edging and handles in the finished component, with the connection assessed in the selected core.

MATCHED VENEER, EDGE FINISH & PROCESS SEQUENCE

Carry the Bintangor appearance across the furniture set

Select the face range and pair relationship

Review Bintangor colour, grain, repairs and veneer joints under the intended finish. Specify general colour coordination, a same-sheet pair or a particular veneer sequence for neighbouring fronts.

Book-matching describes the arrangement of veneer leaves; adjacent cutting positions define the same-sheet relationship chosen for the components. Keep the required relationship with the approved pair and drawing.

Include the full coating sequence

Develop sanding, stain, sealer and topcoat on the selected veneer, including a permitted repair and finished corner. View faces, reverse and edging under the intended lighting.

Carry reverse treatment, supported drying and storage through the process. Check completed-component flatness at the specified stage.

Coordinate calibration with face preparation

The calibrated sanded configuration is the starting supply. Specify any further material removal with its effect on finished thickness and the decorative veneer available for preparation.

Review the face through cutting, drilling and edging, including cutter entry, exit and corner trimming. Use the relevant tool and coating setup guidance on the actual component.

Keep edges and handed parts identifiable

Mark exposed, banded, joined and concealed edges. Select edge material, colour and corner treatment with the final dimensions, whether the route uses paint, veneer edging or a polymer band.

Carry part code, show face, left/right identity and matching group through machining and finishing. Place temporary marks where they can be removed without affecting the finished surface.

20 CABINETS · 40 FRONTS · MATCHING RULE INCLUDED

Order accepted pairs with the cutting quantities

Use the 380.4 × 684.4mm substrate for the 0.8mm edging route without pre-milling allowance. Select a 1220 × 2440mm sheet, 10mm trim at every edge and 3mm separating kerfs, leaving 1200 × 2420mm usable.

Read the worked detail and calculations

With the 684.4mm edge along the sheet length, three widths plus two kerfs need 1147.2mm; three lengths plus two kerfs need 2059.2mm. The regular grid fits nine blanks. A fourth across would need 1530.6mm, and a fourth along 2746.6mm.

Nine 380.4 by 684.4mm blanks on a trimmed 1220 by 2440mm sheet, with one adjacent pair in each rowNine blanks · three row pairs1220 × 2440mm sheetPair APair BPair CThreeunpairedblanks684.4mm edge along sheet length10mm perimeter trim · 3mm kerfColours identify pairs, not veneer grades
Three adjacent pairs from the nine-blank gridThis layout selects one pair from adjacent positions in each horizontal row. The third blank in each row remains available for another agreed component or matching group.

Compare orientation with the required grain

A rotated regular grid fits one 684.4mm width across and six 380.4mm lengths along, giving six blanks. With grain along sheet length, rotating the part changes the grain direction in the front.

Choose orientation and face selection before finalising output. Include clamp zones, process allowance and any mixed nesting in the production plan.

For left/right sets, record the matching rule alongside blank capacity. The furniture order counts the accepted pairs resulting from that rule.

Compare individual blanks and adjacent pairs

Same 40 required fronts; two selected matching rules
Acceptance ruleCapacity per full gridSheets before other lossesPurchased sheet area
Individual accepted blanks9 blanks; pairing unrestricted by sheet position5 sheets give capacity for 45 blanks14.884m²
Adjacent pairs within each row3 pairs plus 3 unpaired blanks7 sheets give capacity for 21 pairs20.8376m²

The adjacent-row rule requires seven sheets for the 20-pair order. If your finish permits matching between rows, or the unpaired pieces serve other components, include those uses when choosing the layout. Carry face selection and machining losses into the accepted production quantity.

The required 40 substrate blanks contain 10.4138304m², or 0.156207456m³ at nominal 15mm, before drilling and other removals. Use the selected core and actual packed components for shipping weight.

Finished perimeter is 2 × (0.382 + 0.686) = 2.136m per front, or 85.44m for 40 fronts. For edgeband purchasing, add the selected process's end trimming, setup and wastage, and identify which edges receive the material.

CORE DENSITY, RECEIVING CONDITION & DOCUMENTS

Choose the supply for its workshop and finished use

The dried furniture-processing configuration uses 8–12% moisture content. Coordinate the receiving condition and measuring method with precision machining, bonding and finishing. Keep sheets flat on dry supports and protect faces and edges during storage and handling.

Core density ranges are 500–540kg/m³ for poplar, 560–610kg/m³ for combi and 620–660kg/m³ for eucalyptus. The separate transport calculation uses 550kg/m³, giving approximately 24.6kg for 1220 × 2440 × 15mm. The selected core, processing, added materials and packaging determine shipment mass.

Include exposure and required documents

Describe humidity, cleaning and possible wetting, including exposed edges, fittings and cut-outs. Select the bond and protection system for those conditions, with its required method and performance scope.

State emission method, limit and destination documentation separately from adhesive selection. Keep each document connected to the quoted construction.

Define the complete component's duty

For shelves, frames or other loaded parts, include span, supports, load and connection design. Develop the actual component around those requirements.

For exterior, marine, structural, fire or acoustic projects, identify the assembly and applicable specification. We can help select the construction, finish and documentation for that project scope.

A MATCHED PAIR, FINISHED CORNER OR FITTED CONNECTION

Make the sample answer your furniture decision

For cabinet fronts, develop a left/right pair with the receiving cabinet, actual fittings, edging and coating. Review closed gaps, opening movement and the appearance of both fronts together. For frame or access-panel parts, include the critical connection, visible edge and removal detail.

Compare cores using the same geometry and finish, with each construction identified. Keep the accepted pair, hole datum, process stage and drawing revision together for production and repeat orders.

A part photo or sketch is enough to begin. We help complete the core, face/reverse, calibrated supply, matched quantities and useful processing sample, then compare sheets, blanks or components with the same included work.

FROM CALIBRATED PANEL TO MATCHED, PROTECTED SETS

Carry the finished reference through inspection and packing

Keep the panel construction, component drawing and accepted finish together as the work moves from sheets to finished sets. Record each dimension at its processing stage, with part identity retained through edging, drilling and assembly.

A useful record distinguishes a material issue from an assembly issue
Inspection stageRecordCompare with
Sheet receipt or selectionCore identity, face/reverse, thickness measurements, outline, squareness and flatness.The selected construction and agreed measurement/acceptance methods.
Blank preparationSubstrate dimensions, grain, show face, part code and pairing position.The cutting schedule and the stage-specific allowances.
Machining and edgingHole datum, handed pattern, cut-core condition, effective edge addition and corner finish.The component drawing, fitting preparation and approved edge sample.
Finishing and pairingColour, repairs, surface condition, reverse treatment and matching references.The representative finished sample and required pair-selection rule.
Assembly trialActual opening, final gaps, fitting attachment and movement through the intended range.The assembled furniture requirements and relevant performance assessment.
Pack and dispatchAccepted quantities, left/right sets, labels, protection, pack dimensions and mass.The order, packing sequence and delivery requirements.

Protect the finish and preserve each pair

Use face separation, corner protection and supported packs for the selected finish. Label left/right parts and matching groups, and arrange them by cabinet set or receiving sequence where needed.

For a fit adjustment, compare the completed front with the cabinet opening, edge build-up, drilling datum and member positions. Retain the component identity and drawing revision so the revised detail carries consistently into production.

Include accepted quantities, pack dimensions and mass with the delivery brief. For repeat supply, send the sample reference and any fitting, coating or drawing changes. Email drawings to sales@plywoodsupplier.cn or use the 15mm product enquiry form; our production and quality page explains the factory process.

PLAN YOUR PANEL ORDER

Quote the finished pair your workshop needs.

Bring the face relationship, finished fit and included processing into one supply choice. We help connect calibrated panels with edge build-up, hole datums and the selected fittings, then plan the accepted pair quantity and packing around your furniture programme.

15mm Bintangor Plywood

Your finished dimensions, fitting and matching groups

  • Furniture role, selected core, face and reverse
  • Finished sizes, edging, hardware and matching rule
  • Pairs or sets, included processing and destination
View the product specification

Choose a sample for your project

A finished pair in its receiving cabinet

Develop the left/right fronts with their selected edging, fitting and cabinet opening. Review final gaps, movement, hole datum and reverse treatment, then view the pair under its intended finish and lighting.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/15mm-bintangor-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

PRODUCT-SPECIFIC QUESTIONS

Questions about 15mm Bintangor Plywood

What can I order 15mm Bintangor plywood for?

Cabinet fronts, furniture frames, carcass parts, interior screens and supported furniture components. Send the use, visible faces and receiving detail; we help develop the core, finish, machining and useful sample before quoting the supplied parts your workshop needs.

What thickness tolerance applies to the calibrated panel?

The calibrated sanded technical-data configuration is 15mm ±0.3mm, giving 14.7–15.3mm. Those are the bare-panel limits used in the cabinet-opening comparison on this page. Carry later sanding, coating or other processing into the finished-part limits and measure the actual members in the assembly.

Which formats and processing stages are available?

Standard formats are 1220 × 2440, 1250 × 2500 and 915 × 2135mm. We also quote cut blanks, drilled or routed components, edging and finishing around the drawing. Identify whether each dimension applies to a saw-cut blank, post-milling substrate or finished part.

Which cores can I compare under the Bintangor face?

The technical sheet covers poplar, poplar/eucalyptus combi and eucalyptus at 500–540, 560–610 and 620–660kg/m³ respectively. Another named hardwood or combination can be quoted separately with its own data. Compare the same representative component, fitting and finish across the selected cores.

How many plies and what sheet weight does the technical table list?

The 15mm transport configuration lists 11 plies. A 1220 × 2440 × 15mm sheet has nominal volume 0.044652m³; at the table’s 550kg/m³ planning density it weighs about 24.6kg. The table estimates 1074 sheets per 40HQ from approximately 26.4 tonnes of net panels. Use the selected core, pack dimensions and route payload for the actual shipment.

How do I calculate the substrate size before edging?

Deduct the effective finished addition at both opposing edges. For a selected 382 × 686mm finished front with 0.8mm addition at every edge and no pre-milling, the substrate is 380.4 × 684.4mm. Effective addition includes the finished edge and relevant bond-line contribution.

What changes when the edging line pre-mills the blank?

Add back the stock removed before edging. Removing 0.5mm from each edge before the selected 0.8mm effective addition requires an earlier saw-cut blank of 381.4 × 685.4mm for that same 382 × 686mm finished front. Keep other machining allowances and the actual process route with the cutting list.

Should fitting holes use the raw or finished edge as their datum?

Use the datum on the part and fitting drawing. With 0.8mm effective edging and no later pre-milling, a centre selected at 40mm from the finished edge lies 39.2mm from the substrate edge. Keep that coordinate conversion with the reference face and left/right view; the fitting determines its actual preparation positions.

How are the two inset front dimensions calculated?

For the stated 800 × 720mm cabinet with exact 15mm members, the opening is 770 × 690mm. Selected 2mm left, centre and right gaps give two 382mm-wide fronts; 2mm top and bottom gaps give 686mm height. Select the actual reveals with the fitting, opening movement and component tolerances.

How does the calibrated panel range affect those gaps?

Keeping that outside cabinet and the two finished fronts fixed, equal 14.7mm members give a 770.6 × 690.6mm opening, while 15.3mm members give 769.4 × 689.4mm. With equal gap allocation, the three width gaps become 2.2 or 1.8mm, and top/bottom gaps 2.3 or 1.7mm. Include the actual unequal members, squareness and front variation in the assembly plan.

How do I select the hinge or connector for a 15mm front?

Use the exact fitting’s material, thickness and preparation requirements. Develop the pocket, fixing, local core, retained material and movement with the selected panel limits. Choose hinge quantity and positions from the complete front dimensions, mass and duty, including edging, facings and handles.

What is the difference between a same-sheet pair and book-matching?

A same-sheet pair preserves the agreed relationship between selected cutting positions. Book-matching concerns the veneer arrangement. Choose general colour coordination, adjacent pairs or a particular veneer sequence, then review both fronts together under the intended stain or clear finish.

Why does the nine-blank layout provide only three adjacent pairs?

The layout places 380.4 × 684.4mm blanks in a three-by-three grid after 10mm perimeter trim and 3mm kerfs. If each pair must use adjacent positions within the same row, each row gives one pair and one unpaired blank. Keep useful unpaired pieces in the wider schedule and compare other layouts with the selected matching rule.

How many sheets are needed for twenty pairs of fronts?

For twenty pairs, or forty fronts, the stated grid needs five sheets when blanks can be paired without positional restriction. Requiring an adjacent pair in each row needs seven sheets, with capacity for twenty-one pairs. Add the selected face-acceptance and machining allowances to the geometric schedule and quote accepted pairs with the included processing.

What moisture, bond and document requirements can I include?

The dried furniture-processing configuration uses 8–12% moisture. Share humidity, cleaning, wetting or other project conditions so we can select the adhesive, bond performance, coating and edge treatment. Add the required emissions method, limits and destination or sourcing documents for the selected construction.

How do I request a finished sample and factory quotation?

Send a cabinet detail, part photo or finish reference with dimensions, quantity and destination. We help select the core, edging, fittings and matching rule, then develop a fitted pair or connection sample. Available to order, with 10–15 days production, container shipping, freight terms per order and a 180-day after-sales warranty.

Compare the adjacent options

CONTACT OUR FACTORY

Let’s plan your Bintangor furniture parts.

Start with the furniture use, part photo or finish you want. We can help complete the cabinet opening, edge and fitting details, select the core and sample pair, then quote the supplied parts and operations your workshop needs.

  • Nominal panel thickness: 15mm overall plywood panel, with supplied and final component dimensions identified.
  • Calibrated sanded thickness: TDS-PS-01: ±0.3mm at 15mm, giving 14.7–15.3mm at the calibrated supply stage.
  • Standard sheet sizes: 1220 × 2440mm, 1250 × 2500mm and 915 × 2135mm; custom sizes and cut components by enquiry.

Have an edged-front drawing, hinge detail or matching layout? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗