PLYWOOD & MDF · CHINA

Natural Fancy American Beech Veneer Plywood — product photographView product photograph

OUR FACTORY · PRODUCT DETAILS

Natural Fancy American Beech Veneer Plywood

A coordinated beech finish, from the cabinet front to the matching edge.

Create furniture and interior joinery with natural American beech veneer over the plywood core your parts need. Our factory helps plan the tone, leaf layout and finished edge across neighbouring fronts and panels. Send a furniture photo, elevation or cutting list; we will develop the sample and quote full sheets, selected blanks or processed components around your design.

Decorative face
Natural American beech veneer
Thickness range
2–30mm
Supply options
Sheets / selected blanks / custom parts

Available to order · 10–15 days production · Container shipping

CONSTRUCTION & SUPPLY CONDITION

Natural Fancy American Beech Veneer Plywood specification

Our product configuration and order requirements
Decorative faceNatural American beech veneer; selected material identity, tone and appearance range recorded with the order.
Manufacturing locationOur factory in Xuzhou, Jiangsu, China. Veneer sourcing and any requested origin information are identified separately.
Sheet formats1220 × 2440mm, 1250 × 2500mm and 1500 × 3000mm; custom dimensions and cut parts by enquiry.
Thickness range2–30mm; specify the selected nominal millimetre size and supplied stage.
Thickness tolerances2–9mm: ±0.2mm; 9–30mm: ±0.3mm. For 9mm, select one explicit set of limits and its measurement stage.
Core choicesPoplar, hardwood, birch or eucalyptus plywood construction, selected for the part, edge and fitting.
Face/reverse grade pairsBB/BB, BB/CC, CC/CC, CC/DD and DD/EE, with the grading basis and accepted appearance sample.
Reverse veneerBeech or an agreed alternative; identify both visible sides and any bonding or finishing requirements.
Veneer layoutCut, leaf matching, face assembly, joint positions, grain direction and component sequence specified on the drawing.
Appearance and preparationPale or warmer tone, natural features, permitted repairs and supplied sanding condition selected under the intended finish.
Face allowance and edgingVeneer thickness, subsequent sanding or profiling and the actual edge material planned with the finished corner.
BondingMR, melamine and WBP phenolic references; select the required bonding performance for the intended service conditions.
Emission requirementE1 or E2 references, with the applicable class, method and destination requirement identified separately.
Moisture content10–15% reference; delivery condition and inspection method agreed for the receiving and finishing process.
Joint constructionOverlap, end, scarf and finger-joint options, with the relevant layer and location recorded.
Supplied processingFull sheets, selected blanks or custom parts with finished dimensions, datums, machining and coating scope.
Packing and loadingSelected panel mass, pack dimensions and quantities by order. Starting loading references: 8 pallets/20ft, 16/40ft and 18/40HQ.
Order identity and timingConnect the component schedule, accepted sample, required product records, appearance-group labels, destination and delivery date.

Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.

NATURAL AMERICAN BEECH · FURNITURE & INTERIOR JOINERY

Bring the natural beech face, edge and furniture set together

Create coordinated cabinet fronts, furniture sides, reception counters and interior joinery with our natural American beech veneer plywood. We manufacture in Xuzhou, Jiangsu, China, combining the selected veneer with the plywood core, reverse and thickness your parts need.

Start with a furniture photo, finish reference or the sizes you already have. Our factory team helps develop the visible surfaces, leaf layout and supplied processing into a sample and quotation for sheets, blanks or custom components.

Select the beech material and the construction behind it

American beech, commonly identified as Fagus grandifolia, describes the natural face material. Keep the veneer identity and any requested sourcing information with the order; the finished plywood is manufactured at our China factory. The US Forest Service’s American beech profile provides species background.

Choose the plywood core for the part

Select poplar, hardwood, birch or eucalyptus core with the component supports, hardware and exposed edges in view. Review the layered cut edge and a relevant machined detail alongside the decorative face.

Compare the MDF option where useful

Our beech veneer MDF provides a separate substrate route. Keep the same face and finish reference while comparing routing, hardware, edge treatment and handling for the complete component.

Face/back combinations include BB/BB, BB/CC, CC/CC, CC/DD and DD/EE. Choose the grading basis, permitted natural features and visible reverse under the intended finish. For a divider or open shelf, select both viewing faces together; for a cabinet front, include the interior appearance when the door opens.

The range covers 2–30mm and three sheet formats. Send the finished sizes, preferred thickness and quantity, with any shelf span, support, loading or connection detail that governs the construction. The quotation then identifies the face, reverse, core and supplied work as one configuration.

COLOUR RANGE · LEAF RELATIONSHIP · FINISHED PART LAYOUT

Plan the leaf joints at the size of the furniture front

Show adjoining fronts on the furniture elevation, including top direction, visible reverse and intended finish. Choose a pale or warmer appearance range and compare representative veneer areas at sufficient width and height to see the leaf joints and prominent features.

American beech ranges from light sapwood with a reddish tinge to reddish-brown heartwood, generally with close, fairly straight grain. The AHEC American hardwood species guide describes that natural range. Use the selected veneer and completed finish to choose the appearance for your panels.

Connect leaf matching, face assembly and part sequence

Book matching turns alternate successive leaves; slip matching places successive leaves with the same face orientation. Face assembly determines their widths and positions across the panel, and the later crop determines which portions remain on the furniture part.

Mark a centre joint, equal visible widths or a relationship between adjoining fronts on the component drawing. Review the assembled veneer layout with the actual crop and grain direction before the cutting schedule is finalised.

Compare an edge crop with a centred crop

The two diagrams use a 1200mm usable face assembled from six equal 200mm leaves, with joints at 200, 400, 600, 800 and 1000mm. They compare two 580mm-wide finished components cut from that layout. The blocks show visible leaf widths at a common scale.

Crop from one edgeFinished 580mm component cut from a selected 1200mm face layout made of six equal 200mm veneer leaves. Visible leaf portions are 200, 200, 180 millimetres from left to right. Both drawings use the same half-pixel-per-millimetre scale. The dashed markers identify the component centre. Block colours distinguish portions, not actual wood colour.Crop from one edge580mm finished component200200180Centre at 290mmWidths in mm · common scaleLeaf boundaries only · no grain prediction
Crop from one edgeThe 0–580mm crop keeps three portions. Its two joints are 200mm and 400mm from the finished left edge, away from the component centre.
Crop around the centreFinished 580mm component cut from a selected 1200mm face layout made of six equal 200mm veneer leaves. Visible leaf portions are 90, 200, 200, 90 millimetres from left to right. Both drawings use the same half-pixel-per-millimetre scale. The dashed markers identify the component centre. Block colours distinguish portions, not actual wood colour.Crop around the centre580mm finished component9020020090Centre at 290mmWidths in mm · common scaleLeaf boundaries only · no grain prediction
Crop around the centreThe 310–890mm crop has a joint at the 290mm centre and equal outer portions. The inner and outer portions still have different widths.
Equal starting leaves, different joint positions after cutting
Selected interval on the wide faceVisible leaf widthsJoints from the new left edgeResulting layout
0–580mm200 / 200 / 180mm200 / 400mmNo joint at the 290mm component centre
310–890mm90 / 200 / 200 / 90mm90 / 290 / 490mmA central joint and equal outer portions

The centre crop places a joint at the component centre with equal outer portions. Its inner and outer portions have different widths. Specify the required matching or face-assembly convention with the drawing, then compare the actual colour and figure across the joint under the intended finish.

This calculation starts from the six-leaf layout stated above. For your order, review the available veneer leaves and usable face areas, or plan a face around the finished component width. Keep the accepted layout with the quotation and the cutting map.

Review the group in its installed order

Mark top direction and compare neighbouring fronts from their normal viewing position. Include the reverse sequence for dividers or open displays. Identify restricted features near a handle, centre display area or narrow rail on the finished outline, then preserve the selected group through processing.

CABINET FRONTS · FURNITURE · COORDINATED INTERIORS

Choose the construction and finish around the assembly

Cabinet fronts and drawer faces

Plan leaf arrangement and part sequence across the elevation. Include visible reverses, hardware zones and edging, then compare a completed neighbouring pair under the proposed coating.

Furniture sides, shelves and dividers

Coordinate broad faces and edges across the furniture. Share shelf spans, supports, loading and connection details to select core and thickness with the beech appearance.

Interior wall and joinery panels

Mark joints, grain direction, face centres and installation order. Include the support and attachment system, together with any fire or other project requirement for the selected assembly.

Reception and display furniture

Compare returns, corners and neighbouring materials in one finished sample. Locate high-touch edges and exposed joints, and keep the approved appearance groups together during machining and packing.

Freestanding double-sided parts

Choose the reverse as a second visible surface and review both viewing directions with their edges. Include the complete support and fixing arrangement for the furniture or divider.

Projects needing replacement parts

Record component positions, veneer and coating references, with spare groups identified. Compare later replacement faces with the installed finish and the retained appearance range.

Tell us whether the component serves a dry room, humid area or another exposure. Select the required bond performance from the MR, melamine or WBP phenolic references around that construction. Add exterior, marine or other project requirements where relevant.

Specify E1/E2 emissions requirements separately with the method and destination criteria. For decorative packaging, construction or other specialised use, include any food-contact, structural or regulated requirement with the part drawing so the relevant product information follows the chosen supply.

TONE · SHEEN · FACE-TO-EDGE TRANSITION

Choose a finish that works across faces and corners

Compare the proposed preparation and topcoat on the selected veneer with the actual edging, frame or adjoining panel. A physical finish reference is useful; a clear photo can begin the discussion. Develop the tone and sheen through a finished surface and an assembled corner.

Compare finishing routes across the accepted veneer range

When comparing three finishing routes, select three representative face areas: a lighter accepted area, a warmer area and an agreed natural feature or repair. Applying each route to each area produces nine labelled face samples. Use this matrix where it helps choose the finish for the project.

A project-specific sample matrix before selecting one finishing route
Material areaRoute ARoute BRoute C
Lighter accepted face areaProposed clear systemProposed light-tone systemProposed stained system
Warmer accepted face areaSame A preparation and coatingSame B preparation and coatingSame C preparation and coating
Agreed feature or repaired areaInspect contrast after finishingInspect contrast after finishingInspect contrast after finishing

Keep the substrate, preparation and application consistent within each route, with material area and process labelled. Retain the chosen finished reference and process details for production.

Include the edge junction and local machining

Make a finished corner with the selected beech edging or other edge material, using the actual joint and flushing operation. Coat it with the face process. Include a groove, hole or profile where furniture machining exposes the construction.

Review sanding, glue marks, repairs and cut quality before and after coating. Identify the supplied veneer thickness and preparation condition so further sanding or profiling preserves the decorative face, especially at corners, edges and repaired zones.

Follow the coating supplier’s preparation and application guidance for the selected system. Keep the grit sequence, colour treatment, application and curing details used on the accepted sample with any tighter surface requirement.

Calculate the surfaces receiving the finish

For a 580 × 1190 × 12mm rectangular finished panel, one broad face is 0.6902m² and both broad faces total 1.3804m². Four square edges add 2 × (0.580 + 1.190) × 0.012 = 0.04248m². Coating both faces and all four edges covers 1.42288m² per panel, or 34.14912m² for 24 panels.

These areas use a rectangle with no openings, profiles or lipping. Adjust the surface schedule for those features and for faces receiving different processes. The selected coating, number of coats, application method and losses determine the material quantity for that area.

THICKNESS LIMITS · PLYWOOD EDGES · FITTED DETAILS

Carry the chosen face through machining and assembly

Thickness bands are ±0.2mm for 2–9mm and ±0.3mm for 9–30mm. At the shared 9mm boundary, select one explicit set of limits and the measurement stage on the order.

Read machining and workshop guidance

A 12.0mm target in the upper band gives 11.7–12.3mm. Include subsequent sanding, coating or bonding when defining the finished component dimension. Measure the receiving profile and account for its own dimensional limits when planning the fit.

Use the exact metric target for inch-based drawings

Exact inch conversions alongside the commercial metric groupings
Inch referenceExact conversionMetric grouping
1/8 inch3.175mm2.7–3.6mm
1/4 inch6.350mm6–6.5mm
1/2 inch12.700mm12–12.7mm
5/8 inch15.875mm15–16mm
3/4 inch19.050mm18–19mm

Choose the actual target and accepted limits for a channel, connector or edge profile. The commercial 18–19mm grouping and exact 19.05mm conversion describe different purchase requirements; a selected 18.0mm order carries its own tolerance.

Review the core at the machined feature

Use a cut edge, groove or drilled feature in the chosen poplar, hardwood, birch or eucalyptus core. Specify where overlap, end, scarf or finger joints may occur in the relevant layer or construction. Keep that inner arrangement separate from the visible leaf layout.

For a routed profile, identify face-veneer allowance and deepest cut. Review the exposed inner plies if the design reveals them, or choose lipping and edge treatment for a uniform finished edge.

Set the datum, tool reach and support

Mark the outward face, top direction and finished-edge datum. Include a drill point or stepped tool’s deepest reach and any overlapping operations from opposite sides. Review the remaining section at their actual positions.

Use the hardware instructions and a fitted trial in the selected core. Define fixture support and protection for both visible faces, then review the complete connection or supported component for its intended duty. Keep the accepted detail with the production drawing.

Plan from the supplied moisture condition

The moisture reference is 10–15%. Agree the delivery condition and inspection method, with the material condition needed for machining, bonding and coating. Store flat on suitable supports and protect the selected faces. State any narrower process requirement with its measuring method in the order.

FIXED GRAIN · FACE ALLOCATION · TWENTY-FOUR PARTS

Compare usable furniture parts from each sheet format

For 24 finished panels of 580 × 1190mm, allow 5mm final trimming at every part edge to make a 590 × 1200mm blank. In this cutting layout, the 1200mm direction follows face grain along the sheet length, without 90-degree rotation.

Read the worked detail and calculations

Use 10mm perimeter trimming at every sheet edge and 3mm kerf between blanks. Those are the layout inputs; select the actual trim and tool clearance with the supplied face and reverse areas.

Regular grids for 590 × 1200mm blanks under the stated allowances
Sheet formatUsable rectangleColumns × rowsBlank positions
1220 × 2440mm1200 × 2420mm2 × 24
1250 × 2500mm1230 × 2480mm2 × 24
1500 × 3000mm1480 × 2980mm2 × 24

Two columns occupy 1183mm and two rows 2403mm. Three columns need 1776mm and three rows 3606mm, beyond even the largest usable rectangle in this orientation. Each format therefore offers four geometric positions; the remaining material can be allocated to other suitable parts.

With all four positions selected for the required appearance, 24 blanks use six sheets in each format. Compare this regular grid with a mixed-part cutting schedule when there are other sizes to make.

Six-sheet purchasing scope for the same 24 blank positions
Sheet formatSheetsPurchased single-face areaNominal 12mm material volume
1220 × 2440mm617.8608m²0.2143296m³
1250 × 2500mm618.7500m²0.2250000m³
1500 × 3000mm627.0000m²0.3240000m³

The table uses 12mm as the selected thickness for volume comparison. Other supplied thicknesses change that volume. Use the chosen construction, actual mass and packed dimensions for freight and handling, alongside quotations for the same accepted parts and supply stage.

Plan the centred face before choosing sheet quantity

For the six-leaf 1200mm face above, a finished 580mm component centred at 600mm occupies 310–890mm. With 5mm final trimming on both sides, its 590mm blank occupies 305–895mm. That selected layout provides one centred column across the face.

On the smallest format, two 1200mm blanks fit along the usable 2420mm length. This centre-only layout yields two blanks per sheet, so 24 require 12 sheets, with 35.7216m² purchased single-face area and 0.4286592m³ nominal 12mm material volume.

We can compare that crop with a face assembled around the finished width, a different accepted leaf arrangement or custom component supply. Price the agreed centred face and complete group alongside its supplied machining, rather than judging the order by sheet area alone.

Full sheets with flexible part locations

Select usable component areas from the available face layout. The stated grid has four positions per sheet, with colour, features and reverse selection included in the accepted cutting map.

Defined faces on finished components

Send the centre joint or leaf-width requirement, grain direction and sequence. We develop the face and machining around that component, then quote the required completed quantity.

Separate purchased area, blanks and finished coverage

The 24 blanks total 16.9920m²; the 24 finished rectangular faces total 16.5648m². Their 0.4272m² difference is final perimeter trimming. Add installation gaps, project trims and any extra sheets needed for selected appearance areas to the appropriate schedule.

Review each allocated position against the chosen face and reverse. If only one of the two central positions qualifies, count one accepted component from that sheet. Include spares or replacement parts in the same appearance group.

FINISHED FACE · MATCHING EDGE · ACTUAL COMPONENT

Develop the beech sample around your furniture design

A furniture photo, elevation or available part sizes can start the sample. Show the pale or warmer tone you want, the visible sides and adjoining material. We help develop the veneer identity, leaf layout, core and thickness into the face and fitted detail to review.

Include enough veneer area to see the intended joints, a finished corner with the actual edge material and the critical groove, hole or profile. Compare adjoining parts in their installed order and keep the reverse visible where the furniture exposes it.

For a choice between full sheets, selected blanks and completed parts, use the same centred-face requirement, finish and accepted group in each quotation. State the processing supplied by the factory and the work your workshop will carry out.

For custom dimensions, send the drawing or available sizes, grain direction and quantity. Keep the accepted configuration, finish system and drawing revision together for repeat work, updating the relevant sample when the core, reverse, edging or machining changes.

SELECTED MATERIAL · FINISHED GROUP · IDENTIFIED PACKS

Keep the approved furniture set together through delivery

Use the selected construction, finished appearance reference and component drawing together for receiving checks. Include the natural face range, dimensions, machining and requested product records in the inspection plan.

Checks for the material, conversion work and completed appearance group
Acceptance itemWhat to examineRecord to retain
Veneer and core identitySelected face description, reverse and actual plywood constructionOrder configuration and any specified sourcing evidence
Dimensions and conditionThickness, length, width, squareness, flatness and supplied moisture conditionAgreed limits, method, measurement stage and sample locations
Veneer layoutLeaf joints, component centre, grain direction and restricted featuresCutting map and visible-area drawing
Machined detailsCut edges, grooves, holes, local core condition and face breakoutSelected tool detail, part datum and trial-part result
Finished groupTone, sheen, repaired areas, edging and adjoining partsAccepted finished range and process references
Packing and identificationProtection, quantities, face orientation and panel sequencePack numbers, component list and replacement-part groups

Specify thickness, length, width, flatness and squareness limits separately with their measuring conditions. For features aligning across several panels, review the assembled relationship as well as each component. Compare light, warm and featured areas within the accepted range under the chosen viewing conditions.

Mark top direction, principal face, reverse and part sequence while protecting the surface. Keep neighbouring pieces and replacement groups identifiable. Arrange packs by project area or installation order where that helps the workshop preserve the selected layout.

Loading references are 8 pallets in a 20ft container, 16 in a 40ft container and 18 in a 40HQ. The actual plan uses the chosen sheet size, pack dimensions and gross weight with the route and delivery scope.

Use the product enquiry form or send photos, drawings and finish references to sales@plywoodsupplier.cn. Start with sizes, quantities and destination; our factory team helps complete the selected face, processing and packing schedule.

PLAN YOUR PANEL ORDER

Choose the beech look, then plan the parts that deliver it.

Work with one factory team on the natural veneer range, face layout, core and finished edge. We help connect the sample to usable component positions and the supplied processing, so your quotation reflects the furniture group you need to receive.

Natural Fancy American Beech Veneer Plywood

Your beech appearance, plywood construction and component sequence

  • Furniture elevation, visible faces and beech finish reference
  • Core, thickness, leaf layout and component quantities
  • Machining sample, product records, packing and destination
View the product specification

Choose a sample for your project

The beech face, finished corner and neighbouring parts

Start with the furniture photo or elevation and the beech tone you want. Review the planned joints at component width, compare a finished corner with the real edge material, and include the machining detail that matters to the selected core.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/natural-fancy-american-beech-veneer-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

PRODUCT-SPECIFIC QUESTIONS

Questions about Natural Fancy American Beech Veneer Plywood

What surface and core does this panel use?

The face is natural American beech veneer, commonly identified as Fagus grandifolia, over a selected plywood construction. Core choices include poplar, hardwood, birch and eucalyptus. We identify the face, reverse and chosen core with the order and sample.

Where is the plywood manufactured?

We manufacture in Xuzhou, Jiangsu, China. American beech identifies the selected face material; any veneer sourcing or origin requirement is recorded separately from the manufacturing location of the finished plywood.

Which sizes and thicknesses can I order?

Choose 1220 × 2440mm, 1250 × 2500mm or 1500 × 3000mm sheets within the 2–30mm range, or send custom blank and component dimensions. We help develop the core, reverse, face layout and supplied processing around those sizes.

How do I specify thickness tolerances?

The references are ±0.2mm for 2–9mm and ±0.3mm for 9–30mm. Select one explicit set of limits for the overlapping 9mm boundary. A 12.0mm target under ±0.3mm gives 11.7–12.3mm at the agreed stage; identify any subsequent sanding, coating or bonding with the finished dimension.

Can I choose a pale or warmer beech appearance?

Yes. Share the tone, grain and sheen you want, with permitted features or repairs where known. Compare representative veneer areas under the intended coating and beside the actual edge material. Keep the accepted natural range with the furniture group.

How do I specify book matching and a central joint?

Book matching defines the relationship between successive veneer leaves; face assembly and cutting determine where the joints land on a component. Mark the finished width, desired joint positions and neighbouring fronts on the drawing, then review the actual face layout with the sample.

What happens when a wide veneer face is cut down?

In the selected 1200mm face layout with six 200mm leaves, a 0–580mm crop shows 200/200/180mm portions and joints at 200/400mm. A 310–890mm centre crop shows 90/200/200/90mm portions and joints at 90/290/490mm. Use the actual leaves and finished outline to choose the layout for your front.

Can you supply a visible beech reverse and coordinated edging?

Yes. Choose a second visible beech face or an agreed reverse around how the component is used. Review the actual edging, lipping or profile with a finished corner, including the coating response and both viewing directions.

How do I compare finishing routes?

Use representative areas from the accepted veneer range with each proposed coating route. Three selected face areas and three finishing routes produce nine labelled face samples. Compare the actual edging and neighbouring pieces alongside them, then retain the accepted process and finish reference.

How is the coating area calculated for a component?

For a square-edged 580 × 1190 × 12mm panel, the two broad faces total 1.3804m² and the four edges total 0.04248m²: 1.42288m² per panel, or 34.14912m² for 24 panels. Coating quantity also follows the selected product, coats, application method and losses.

Which sheet format fits the 590 × 1200mm cutting schedule?

With 10mm perimeter trim, 3mm kerfs and fixed grain direction, all three listed formats fit a two-by-two grid of four blanks. Two columns use 1183mm and two rows use 2403mm. Choose the supply around accepted face areas, useful offcuts and the actual delivered quotation.

Why can a centred face layout need more sheets?

In the stated six-leaf 1200mm face layout, the centred 590mm blank occupies 305–895mm. One centred column and two rows give two blanks per 1220 × 2440mm sheet, so 24 need twelve sheets instead of six with four accepted positions. We can compare a face planned around the part width or custom component supply.

Should I choose beech veneer plywood or beech veneer MDF?

Compare the completed component with the same face and finish reference. Here the substrate is plywood; the MDF range uses an MDF substrate. Send the routing, exposed-edge, hardware, weight and service requirements so we can help compare the useful supply options.

How do I plan routed edges, moisture and bonding?

Share the deepest profile or cut, selected edge treatment and hardware. The face allowance and core follow that detail. Use the 10–15% moisture reference with the delivery and workshop condition, select bonding for the intended use, and identify emissions or other project requirements separately.

How can adjoining fronts stay coordinated through delivery?

Keep top direction, principal face, grain, leaf layout and sequence on the component schedule. Review finished neighbours together and retain the accepted group and coating reference. Pack by set or installation order, including any replacement group and requested product records.

What do I need for a sample and factory quotation?

A furniture photo, elevation or part sizes can start the discussion. Add the tone, visible sides, quantities and destination when known; we help complete the core, layout, machining and finish sample. Available to order, with 10–15 days production, container shipping, freight terms per order and a 180-day after-sales warranty.

Compare the adjacent options

CONTACT OUR FACTORY

Let’s develop your beech furniture panels.

Share a photo, drawing or available part sizes, with the visible sides and approximate quantity. We can help turn the design into a face layout, finish sample and practical sheet or component supply.

  • Decorative face: Natural American beech veneer; selected material identity, tone and appearance range recorded with the order.
  • Manufacturing location: Our factory in Xuzhou, Jiangsu, China. Veneer sourcing and any requested origin information are identified separately.
  • Sheet formats: 1220 × 2440mm, 1250 × 2500mm and 1500 × 3000mm; custom dimensions and cut parts by enquiry.

Have a furniture elevation, edge detail or finish reference? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗