PLYWOOD & MDF · CHINA

Natural walnut veneer MDF panel on a workshop table with broad brown wood grain figuresNatural walnut veneer MDF panel

OUR FACTORY · PRODUCT DETAILS

Walnut Veneer MDF

Warm walnut grain, coordinated across your furniture.

Create cabinet fronts, sideboards and interior panels with natural walnut veneer on MDF made in our own factory. Bring your elevation or finish reference; we’ll help choose the face range, standard or wide format and finished edges, then arrange samples and a quote for sheets or matched components.

Face
Natural walnut veneer
Sheet formats
1220 × 2440mm / 1830 × 2440mm
Thickness range
2–30mm; selected configuration agreed

Available to order · sheets or matched parts · 7–10 day production.

NATURAL WALNUT · DEFINED MDF CORE · COORDINATED FURNITURE

Bring your walnut furniture design to our factory

Bring walnut’s warm brown tones and distinctive grain to cabinet fronts, sideboards, interior panels and decorative joinery. We combine the selected natural face with MDF substrates made in our own factory, developing the reverse, edges and delivered finish around the pieces your customers will see together.

Make the whole furniture elevation your starting point. Show the grain direction, visible edges and adjoining pieces, then choose how lighter areas and stronger figure belong in the design. Our team helps develop the walnut selection around that complete composition.

Develop a coordinated furniture collection

Plan the walnut selection around your drawer stack, adjoining fronts, complete sideboard or room installation. We review the face range and sheet format for that group, then keep its parts connected through labelling, finishing and packing.

Plan the next batch or replacement group

Bring the earlier material and finish records with a current physical reference. Identify whether you need a single replacement or a complete visible group, and our team helps develop the new selection around the furniture already in place.

Choose natural walnut veneer for a real wood face on MDF. Explore our natural veneer MDF range for other woods, or woodgrain melamine MDF for a printed decorative finish. We can help compare the appearance, maintenance and delivered construction for your project.

Our formats are 1220 × 2440mm and 1830 × 2440mm, with a 2–30mm thickness range. Choose the width around the complete furniture group, face arrangement and workshop capacity. We help plan the selected positions and usable quantities before quoting sheets or finished parts.

STANDARD & WIDE SHEETS · MATCHED FURNITURE PARTS

Walnut veneer MDF supply options

Choose walnut MDF around the furniture you make
Order choiceOptions to discuss
Natural walnut faceChoose the light-to-dark range, grain figure, joins and matching around the finished elevation and actual veneer identity.
Sheet formats1220 × 2440mm or 1830 × 2440mm, selected around face allocation, component sizes and workshop handling.
Thickness and MDF2–30mm range, with the MDF grade, delivered thickness stage and tolerance selected for the component. We manufacture the MDF substrate in our own factory.
Matched partsDoor pairs, drawer groups and multi-front sideboards with source positions, grain direction and installed sequence kept together.
Edges and finishWalnut veneer banding, selected solid lipping or a coordinated coated edge; choose unfinished veneer or an agreed completed finish.
Factory work and samplesFull sheets, cut blanks or agreed machined components. Include adjoining faces, the actual edge and critical fitting in the useful sample.
Open the full walnut MDF construction and ordering specification
Complete walnut veneer MDF specification
Face materialNatural walnut veneer over MDF; species identity and selection stated for the order
Sheet formats1220 × 2440mm; 1830 × 2440mm
Thickness range2–30mm; selected thickness, measurement stage and tolerance agreed
Appearance selectionAAA / AA trade references; colour range, features and veneer joints defined by sample
Face arrangementAgreed leaf arrangement, grain direction and component matching groups
Reverse constructionSpecified balancing reverse or selected visible face, according to the component
MDF gradeSelected for the indoor application, machining and required performance
Density reference720–810kg/m³; identify whether the value describes the core or finished panel
Density variation reference±7%; define the reference density and sampling basis
Moisture reference4–9%; measurement method, condition and acceptance stage specified
Bending strength referenceMOR >25.0MPa; applicable thickness and test method identified
Bending stiffness referenceMOE >2200MPa; selected construction and test basis identified
Face withdrawal reference>1000N; screw, pilot hole, embedment and test method specified
Internal bond / edge withdrawalSeparate acceptance limits, units and methods agreed for the selected MDF
Expansion reference<10%; property, exposure duration and method must be specified
Emission referencesE0 / E1 / E2; required test method, limit and evidence scope agreed
Edge treatmentWalnut veneer band, selected solid lip, coated contrast or agreed detail
Delivered finishUnfinished veneer or an agreed completed finish; sample defines colour and sheen
Production briefComponent drawings, grain direction, matching groups, machining and reserve scope
Order and packingQuantity, group labels, destination, protection and delivery window confirmed

FURNITURE FRONTS · TOPS · INTERIOR PANELS

Bring warm walnut grain to your furniture and interiors

Three-front sideboards and low cabinets

Create a coordinated sideboard bank with the left, centre and right fronts identified from the installed viewing side. Compare the grain across the gaps and handles, bringing the visible end and top into the same appearance review.

Use the wide-sheet layout to plan same-row fronts, then select the actual face range for the group. Include hinges, finished front mass and edges in the component drawing, with the spare-group plan for furniture delivered as complete sets.

Wardrobe doors and tall fronts

Develop tall wardrobe fronts around the whole face: figure placement, longer light areas and adjoining doors. Show the open-door reverse and visible edge, using a representative full-height reference to discuss the finished composition.

Bring the actual door dimensions, thickness, finished mass and support arrangement to the hardware and furniture design. We agree the supplied panel’s flatness and condition within that complete component brief.

Furniture tops and display surfaces

Choose the visible perimeter for furniture tops and display surfaces, from a thin veneered edge to a stronger solid-lipped detail. Mark cable and fitting openings, and compare the top with the front elevation under the selected finish.

Select the top’s coating for the cleaning, wear and contact conditions it will face, then trial the completed surface. Include water, heat or abrasion requirements where relevant, alongside the supports and load checks in the furniture design.

Interior wall and reception panels

Carry the walnut selection through wall and reception panels with a full elevation. Mark joints, returns, outlets and removable pieces, then compare the range under the intended lighting. Keep access panels identified with the surrounding visual group.

Include mounting, backing and service conditions in the interior panel brief. Where the project calls for fire or acoustic performance, we help plan the relevant panel and assembly evidence alongside the walnut appearance selection.

Freestanding dividers and open furniture

Give a freestanding divider or open furniture piece a considered face on both sides. Specify the two selections, grain directions, top edges, openings and connector details that will be visible in use.

Review the complete piece from both viewing directions, with the selected reverse and finishing work included. This connects the two-sided appearance with the actual panel build rather than a concealed-back furniture brief.

Replacement and refurbishment components

Compare the proposed finished replacement with the furniture’s current surface and surrounding pieces. Record the material identity and the colour adjustment needed after its lighting exposure, cleaning and earlier finish.

Agree whether the replacement is one front, a pair or a complete bank. Bring accurate dimensions and hardware datums with the current physical reference, and develop the finish around the actual surrounding furniture.

MATERIAL IDENTITY & VISIBLE CHARACTER

Choose the walnut character your design will show

Natural walnut can show a substantial contrast between pale sapwood and darker heartwood. The offered selection may also contain differing brown tones and figures across a face. Use a physical range sample to agree the appearance required for your project.

Where your purchase calls for a particular walnut species or origin, include it with the appearance reference. We identify the offered veneer in the quotation and help gather the relevant material information alongside the panel construction.

Decide where contrasting colour is welcome

Choose the natural contrast that works for your design: character-rich faces, a restrained bank of fronts or selected lighter accents. Mark the visible zones and preferred placement of colour variation, so the offered range follows the composition.

Show where you want quieter grain or darker, more even colour on the actual front layout. Our team connects those viewing areas with the component map before allocating the sheet face, keeping the strongest contrast in the positions your design calls for.

Choose the face range with a physical reference

Choose the appearance behind our AAA or AA trade reference with a physical range sample. Define the colour contrast, grain figure, joins, natural features and permitted repairs for the visible parts, keeping that selection brief with the quoted label.

Give the reverse its own brief: an open-door back, a concealed panel or a second presentation face. Identify the viewing direction and finish for each visible side so the construction and appearance cover the complete component.

Turn the appearance preference into a usable face-selection brief
FeatureDecision to makeReference to provide
Light and dark contrastAllowed range and whether pale areas may cross the main display faceSeveral representative finished areas, including the strongest accepted contrast
Grain figureQuieter linear grain, broader figure or a selected natural mixA face large enough to show the figure at component scale
Veneer seamsLeaf arrangement and seam locations relative to handles and panel jointsFace layout with important visual centre lines
Natural features and repairsAccepted type, size, concentration and positionBoundary samples and clearly marked restricted zones
Visible reverse and edgesAppearance when the door opens or the furniture is viewed from the sideThe complete face, edge and reverse assembly

WALNUT FACE RANGE & YOUR MATCHING GROUP

Judge colour and figure across adjoining pieces

Walnut veneer face photographs showing brown colour variation and contrasting grain figures
Natural walnut face details with contrasting brown tones and grain figures. Select the delivered colour range and finish on the physical material.

Explore the natural face variation

Use these photographed face areas to introduce the tone and grain variation you want to discuss. Compare the offered physical range under your intended finish and viewing conditions. Include the full coating, actual edge and neighbouring material in the selected sample.

Start with the broad face on the workshop table to discuss the overall composition, then use the detail photographs for local variation. Connect both views with the offered veneer selection and your component layout when planning the order.

Develop the grain across the complete group

Develop both the veneer leaf arrangement and the relationship between finished parts. Place the selected face within each door or panel, then review the adjoining pieces as one coordinated furniture group.

Bring a joined reference for the mirrored or same-direction leaf arrangement you want. Identify the sheets or cut parts that need to stay together, adding the cabinet sequence to the accepted matching sample.

Keep the chosen layout with every front

Use a front-view elevation with part codes, top marks and grain directions. Carry the same identity into the back-view machining drawing, so the workshop keeps the left and right fronts in their intended positions while preparing the hardware.

Identify the left, centre and right fronts from the installed viewing side, with your project’s group code and part references. Keep those identities through selection, cutting, edging, coating and packing. If one front fails inspection, review the appearance of its proposed replacement beside the other two before treating the set as complete.

Review the selected source positions as an assembled group, including veneer joins, saw cuts, finished edges and installed gaps. This helps develop the intended grain relationship across the fronts before the sheet is divided.

SUBSTRATE, REVERSE & TECHNICAL REFERENCES

Build the MDF panel around your component

Choose the walnut face for the appearance and the MDF grade for the component’s use. Bring the environment, machining and fixing needs with the drawing, and we help connect the selected construction with the relevant performance requirements.

Tell us whether you are making a supported lining, moving door, long shelf or furniture top. Include spans, supports, concentrated loads and hardware needs. We develop the substrate choice and relevant checks around that duty, alongside the walnut appearance.

Define delivered thickness and the reverse build

Record whether the specified thickness refers to the bare substrate or the delivered veneered panel. Veneering, subsequent sanding and coating can affect the completed dimension. For grooves, hinges and flush joints, state the stage at which the agreed upper and lower limits apply. Keep the selected limits and measurement condition on the current component drawing.

Include the reverse material, appearance and finishing work in the same construction schedule. For bonded panels, bring the adhesive and support system; for deep machining, bring the section drawing. Our team helps develop the complete panel around the next operation.

Read MDF technical values and their order scope
Read the technical references with their test and construction scope
PropertyProduct referenceWhat the order must define
Density720–810kg/m³Selected board, measurement basis and whether the figure describes the core or finished panel
Density variation±7%Reference density, sampling and calculation; this is not a flatness tolerance
Moisture content4–9%Measurement method, conditioning and acceptance stage
Bending strength, MOR>25.0MPaTest method, applicable thickness and specimen condition
Bending stiffness, MOE>2200MPaTest basis and selected construction; this is not an allowable shelf load
Face screw withdrawal>1000NScrew, pilot hole, penetration, conditioning and test method
Internal bond and edge withdrawalOrder-specific limits and reporting unitsAn unambiguous value, inequality, unit and method for each property
Expansion<10% referenceWhich dimension changes, exposure duration, conditioning and test method
Emission selectionE0 / E1 / E2 referencesRequired method, limit and document scope for the supplied build

Connect the required values to the selected board, thickness and documentation. Define the reference used for density variation and the exposure method for expansion. For waterproof walnut MDF requirements, include the actual service conditions, exposed edges and openings so we can help choose the MDF and protection for that duty.

For a shelf, door or fixing, identify the relevant bending, bond and face or edge connection requirements with its supports and hardware. European Panel Federation guidance on MDF properties explains these distinctions and why density alone is not a reliable performance ranking.

Send the required emission method, limit and destination with the enquiry. Identify the bare MDF, faced board or completed coated assembly you need documented, and we help gather the applicable information for that supplied construction.

1220MM OR 1830MM WIDE · ACTUAL COMPONENT LAYOUT

Choose the sheet format for your walnut furniture group

Start with the finished cabinet, sideboard or wall elevation. Show the neighbouring fronts, grain direction, joints, handles and visible edges. We help compare the 1220 × 2440mm and 1830 × 2440mm formats around the selected walnut face and the parts your workshop needs to keep together.

Keep the face-position map with the installed view

The maps below identify source positions and adjoining groups. Put actual blank and finished sizes, trimming, saw cuts and permitted rotations on your cutting drawing. Choose the usable face areas against the accepted colour, grain and veneer joins, then retain that allocation with the installed elevation.

1220 × 2440mm walnut MDF face-position mapA position map on the 1220 millimetre format shows paired source positions with grain along the sheet length. Keep the accepted faces and installed relationships on the actual drawing; usable part quantities follow component dimensions, trim, cuts and appearance selection.1220 × 2440mmPlan paired source positionsA1A2B1B2C1C2GrainDirectionKeep selected positions togetherReview your actual part layout
Plan the selected source positionsKeep accepted face areas, grain direction and part positions on the cutting drawing for the 1220mm format.
1830 × 2440mm walnut MDF face-position mapA position map on the 1830 millimetre format shows wider source groups with grain along the sheet length. Keep the accepted adjoining faces together on the actual drawing; usable part quantities follow component dimensions, trim, cuts and appearance selection.1830 × 2440mmPlan wider source groupsA1A2A3B1B2B3C1C2C3GrainDirectionKeep adjoining faces togetherReview your actual part layout
Review wider groups on the full faceUse the 1830mm format to explore your required adjoining-face arrangement, then check the actual component layout.
Choose the sheet format around the accepted furniture group
What to compareInformation that settles the choice
Finished compositionDoor or drawer positions, top direction, visible perimeter, veneer joins and relationship across fitted gaps.
Usable source faceAccepted colour and figure, restricted zones, complete matching groups and separately identified reserves.
Production blankDimensions worked back from the finished part, including trimming, edge banding, lipping, profiling and supplied coating stage.
Workshop routeMachine width, support tables, access, finishing racks and how sheets or parts will be handled.
Order formatFull sheets for your cutting operation or factory-prepared components with group and position labels.

For a three-front bank, review all positions together before choosing the face allocation. Where the preferred arrangement crosses sheets, compare the proposed neighbouring faces as one group. Carry the accepted relationship through edging, coating and packing so your workshop can rebuild the intended composition.

SHEETS · CUT PARTS · COMPLETE MATCHING GROUPS

Compare the order by the supply your workshop will receive

Build the order from the accepted sheets, usable parts or complete matching groups your project needs. Compare quotations with the same walnut range, MDF construction and processing scope, then include the workshop and delivery work attached to each route.

Compare the delivered scope for your walnut furniture order
Supply routeWhat the quotation should identifyWhat stays with the material
Full sheetsSelected format, thickness stage, veneer range, reverse and supplied finish.Face references, source sequence and any matching groups to retain.
Cut blanksAccepted part quantities, blank dimensions, grain direction and preparation allowances.Group code, position, front-view orientation and current drawing.
Machined or finished partsFinal sizes, profiles, edge material, holes, fittings and coating stage.Accepted component sample, critical measurements and finished group layout.
Matched groupsComplete door pairs, drawer stacks or sideboard fronts with approved adjoining-face relationships.Part-to-group list, separate reserve quantities and receiving sequence.

Compare the price for the same supplied configuration

Keep veneer selection, matching, MDF grade, thickness, edges and supplied finish consistent when comparing offers. Include cutting and machining, usable group quantities, packing, handling and freight. We help assemble those details into a quotation that follows your actual furniture or interior order.

Plan reserves around the group you may need to restore

Choose individual spare fronts, complete coordinated groups or reserve sheets with the intended use identified. Keep the finish reference and component map with them. Before a later replacement, compare the retained material and proposed new part beside the current installation.

List production quantities, accepted complete groups and reserves separately. Identify useful offcuts by their actual dimensions, grain direction and selected face so they can be allocated to suitable parts.

ACTUAL WEIGHTS · WORKSHOP CAPACITY · FITTINGS

Plan sheet handling and hardware around the supplied panel

Choose the sheet width and supplied stage with the workshop that will receive them. Send the equipment capacity, access and unloading requirements, and request the actual board, component and pack weights for the selected construction.

Weight and handling information for your selected order
ItemWhat to identifyUse the information for
Supplied sheetActual format, delivered thickness, MDF grade, veneer, reverse and finish; confirm the supplied-panel weight.Support tables, lifting and handling equipment, machine feed and finishing racks.
Finished door or frontComplete component dimensions and mass, including edges, lipping, coating and fitted hardware.The hinge or connector selection with the hardware supplier and furniture designer.
Pack or crateSheet or part quantities, protective materials, pack dimensions and gross weight.Container loading, receiving equipment, access and unloading arrangements.
Phased deliveryPack-to-group references and the quantities needed for each installation stage.Keeping the accepted matching groups together through receipt and assembly.

The technical table retains the 720–810kg/m³ density reference. Identify whether the order’s density record describes the MDF core or complete panel; use the actual supplied construction and weight for handling and shipment planning.

Check the larger format through your whole workshop

Review the 1830mm width against access routes, support tables, machine capacity, finishing racks and protective packaging. If cut parts better fit your receiving operation, send the component schedule so we can include the agreed factory processing in the quote.

Plan hardware with the complete component

Give the hardware supplier the finished mass, dimensions, mounting position, supports and intended duty. Check the actual face or edge fixing, screw, pilot hole, penetration and operating requirements together. Keep the completed fitting trial with the chosen board and component drawing.

CUTTING, EDGE COORDINATION & FIXING DETAILS

Carry the walnut finish through the visible edges

Finish the visible perimeter with natural walnut veneer banding, a selected solid lip, a coated contrast or another coordinated detail. Include the cut MDF edge in the construction and finishing plan alongside the broad walnut face.

Read walnut edge, machining and hardware details

Compare the edge after the same finishing process

Compare the actual walnut band or solid lip as a bonded, trimmed and finished corner with the veneer face. Review tone, figure, stain response, edge grain direction and end joints together to choose the transition your furniture will show.

Develop the dark furniture finish on both the face and edge, choosing the tone and wood character you want to retain. A coordinated contrasting edge is also an option when it belongs in the design and follows a consistent detail.

Show profiles in section

Bring the section for a radius, bevel, finger pull or groove, including depth and position relative to the lip. We help plan the walnut edge construction or exposed-MDF finish around that cut before machining the flat board.

Start from the finished drawing and identify the prepared substrate size and rough-cut allowance. Use the same edge datum for the cut list, drilling and hardware programme, updating the hole reference when the banding or lip build changes.

Prepare the face for your workshop finish

Trial the tooling and support on the selected face, including entry and exit edges, narrow strips and veneer joins. Assess the cut with its intended edge treatment, keeping damage to the broad decorative surface within the agreed appearance requirements.

Agree the retained veneer and supplied sanding condition around the finishing operation. Inspect corners, joins and worked edges on the trial face, keeping the preparation within the decorative material available for the selected build.

Exposed MDF edges need suitable machining and preparation for their final treatment. European Panel Federation guidance on finishing MDF edges explains the value of a clean machined surface. We establish the actual edge preparation with the banding, lipping or coating system selected for the order.

Plan the hardware in the complete component

Record the fastener, core and pilot diameters, penetration, edge distance and material behind the hole. Show whether the fixing enters a face, edge or insert, and check the delivered thickness against any front-side machining.

European Panel Federation’s screwing guidance relates pilot-hole selection to the screw core diameter and the fixing arrangement. Use the hardware maker’s requirements and a trial in the selected board; do not substitute the outer thread diameter or copy a pilot size from a different screw.

Trial the complete hinge or connector for seating, movement, splitting and local face damage. For furniture designed to be dismantled, include that service requirement with the fitting choice and relevant repeated-use checks.

CLEAR FINISH, COLOUR DEVELOPMENT & FACE-TO-EDGE TRANSITIONS

Choose the walnut appearance under your finish

Choose unfinished veneer, a prepared surface or an agreed completed finish for delivery. Where your workshop coats the panels, keep preparation, coating and finished acceptance with the construction schedule, using separate raw-face and finished references.

Use the clear coat to develop the face and adjoining edge, or compare the stained finish across lighter and darker selected areas. Choose the finished range on actual components so the preferred appearance carries across the furniture group.

Compare the finish on the details your customer will see

Choose representative lighter and darker areas from the offered walnut range and compare the shortlisted complete finishes. Include the actual edge, veneer join and any visible reverse in each useful assembly. Review them under the project’s viewing conditions, then retain the accepted range and finish process.

Label each assembly with the veneer, edge, preparation and coating sequence. Compare the broad face, corner, seam and visible reverse, then keep the accepted combination and appearance range with the production selection.

Develop the joints and features in the finish trial

Bring representative joins and features into the finish trial, including filled areas and visible edge transitions. Choose the tone and amount of grain you want the final coating to show before finishing the complete furniture set.

Select sheen under the project’s viewing conditions, adding the measurement method where required. Compare the face and edge together so their gloss or matt appearance coordinates with the chosen colour.

Retain the accepted assembly with its material and process record. For repeat batches, compare the offered finished sample with that reference and the current project conditions, keeping the natural face range part of the selection.

MATERIAL, MACHINING & COMPLETE SET ACCEPTANCE

Connect the accepted sample with your order checks

Build the inspection around the supplied sheet, finished front and assembled bank at their relevant stages. Link dimensions, machining and finish checks with the sample and component drawing used for that order.

Inspection records for a coordinated walnut furniture order
StageInspectRecord with the result
Incoming sheetsIdentity, dimensions, thickness, agreed flatness, condition and face/reverseLot, sheet reference, measurement locations and supplied condition
Appearance allocationColour range, figure, seams, selected zones and group relationshipFront-view layout, top marks, source positions and matching-group codes
Cut and edge trialVeneer chipping, finished size, edge bond and face-to-edge transitionTooling, edge material, machining stage and retained trial component
Hardware trialHole position, depth, seating, remaining construction and operationHardware identity, drawing revision and the selected board thickness
Finished groupCoated colour, sheen, visible reverse, edges and installed sequenceFinish reference, lighting, group code and any agreed replacement
Packing and receiptSet completeness, labels, edge protection and transport conditionPack list, quantities by group and photographs of any damage

Plan the inspected quantities and selection method with the order, including how an out-of-range result is handled. Review matched furniture as a group as well as individual fronts, so the combined arrangement follows the accepted appearance.

Record dimensions in the agreed stage and condition. Identify whether a fit or finish issue appeared before machining, after edging or after coating, connecting the result with the operation that needs attention.

Keep the position code when a part needs replacement and review the new face beside its neighbours. Update the set record where the accepted arrangement changes, keeping the supplied group traceable.

A WALNUT LAYOUT & EDGE SAMPLE

See the chosen walnut across adjoining faces and edges

Start with the desired walnut figure and the strongest light-to-dark range you want to include. Finish adjoining faces and an actual edge under the proposed system; for a three-front bank, review all positions together to choose the complete composition.

Bring the actual reverse and the profile or hardware detail that matters to the order. Include the solid lip or deepest pull section in the sample so the material choice supports the machining your workshop will repeat.

For an appearance-led order

Share the elevation, finished colour reference, natural variation and edge concept. Our team helps develop the veneer range, matching group and finish comparison, keeping the accepted face and edge together.

For a production-led order

Share the cut list, grain directions, thickness limits and hardware detail. We help plan the panel construction and machining trial, reviewing the resulting parts against the finished dimensions and appearance group.

Keep the sheet format, veneer selection, face arrangement, MDF grade, reverse, supplied condition and finish on the sample record. Identify agreed changes separately so the chosen appearance and machining remain linked to the supplied build.

CONFIGURATION RECORDS · FINISHED GROUPS · ORDER TRACEABILITY

Give purchasing the records for the walnut panel you selected.

Keep the walnut identity, face range, matching, sheet format, MDF grade, reverse, thickness and supplied finish under one configuration reference. We help connect the relevant material information and production records to that selection and your destination.

Documents connected to your walnut veneer MDF order
RecordWhat it identifies
MDF substrateSelected grade, thickness and relevant material records. The published 18mm white MDF report and HMR MDF report identify their own boards; request the records relevant to the substrate in your order.
Complete faced panelWalnut face, reverse, bonding and finish, with the required emission, moisture, fire or other performance scope for the panel or assembly.
Appearance and componentAccepted colour range, adjoining-face layout, actual edge, fitting trial and complete coating, linked to the sample and drawing revision.
Production and dispatchOrder and lot references, dimensions and appearance checks, actual pack weights, component groups, quantities and delivery records.

Send any species, origin or sourcing-document requirement with the enquiry. Browse our certificates and reports and production and inspection information, then share the purchasing checklist for your walnut MDF order.

STORE FLAT · PROTECT THE FACE · KEEP SETS TOGETHER

Plan packing around appearance groups and the workshop sequence

Plan packing around the sheet format, project groups and destination handling. Protect broad faces and corners, place labels away from display surfaces using the agreed method, and identify packs for the receiving workshop’s sequence.

For numbered components, include the group and part positions on the packing list. Keep each left, centre and right position traceable even where protective layers separate the components. If raw sheets will be cut after arrival, retain their source sequence and selection references with the proposed cutting map.

Separate transport protection from service performance

Protect the panels during transport and keep them on suitable flat support in the indoor workshop. Avoid damaging overhangs or face loads, and inspect the packaging and sheets on receipt before machining or finishing.

Plan receiving and conditioning for the selected panel and destination workshop. Keep transport protection with the shipping plan, and select the substrate, exposed-edge treatment and relevant service requirements for the panel’s intended environment.

For staged deliveries, retain each batch’s group identities and reference, including reserved material. Where later panels join an earlier installation, compare the new finish under the project lighting as part of that coordinated selection.

PLAN YOUR PANEL ORDER

Make the walnut selection work across adjoining faces.

Choose the contrast and grain your furniture will show, then connect the front layout with the sheet format. We help develop the face range, reverse and coated edge together, keeping the chosen groups identified through cutting and packing.

Walnut Veneer MDF

Our MDF substrate production. We manufacture MDF substrates in our own factory in Jiangsu, China. Talk to our factory team about the board and finish for your components.

Choose the walnut range and panel for your layout

  • Walnut identity, colour range, matching groups and finish
  • Sheet format, MDF grade, reverse and delivered thickness
  • Finished sizes, quantities, edge details and fittings
  • Documents, reserves, destination and delivery timing
View the product specification

Choose a sample for your project

A walnut layout and edge sample

Finish adjoining walnut faces and an actual edge with the offered construction. For a three-front bank, review all positions and the light-to-dark range you want to include. Retain the format, matching, MDF grade and reverse with that accepted sample.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/walnut-veneer-mdf/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
The minimum MDF order is 1 × 20′ GP container.
Production
All products are made to customer order. Production takes 7–10 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

A COMPLETE BRIEF FOR OUR TEAM

Start your walnut panel order with our team

Start with the furniture or interior you are making and the walnut look you want to achieve. Our team helps connect the offered face, MDF build, samples and processing with a supply quotation you can compare.

  • Face: natural walnut identity, figure preference, permitted light/dark range, matching group and visible reverse.
  • Panel: 1220 × 2440mm or 1830 × 2440mm, selected thickness, thickness stage and limits, MDF grade and relevant document requirements.
  • Components: quantities, drawings, grain direction, bare or finished dimensions, edge build, hardware references and any restricted face zones.
  • Finish: unfinished or agreed coated supply, face-and-edge sample, sheen requirement and responsibility for later processing.
  • Order: individual sheets or complete groups, reserve scope, pack identification, destination and required delivery window.

Compare the price for the same delivered unit: sheet, area or finished component. Include the usable appearance groups, workshop handling, edges, coating and packing so the quoted scope reflects the work your project needs.

Send a wood reference, drawing or component schedule to sales@plywoodsupplier.cn, or start through the walnut veneer MDF enquiry form. We help complete the material selection, sample plan and custom supply brief with the details you have.

Available to order. Production takes 7–10 days, with dates recorded in the order confirmation. Panels ship by container with protection for faces, edges and finish. Freight and delivery terms follow the order and destination; allow transit time separately from production.

Supply includes a 180-day warranty. Contact us with the order, pack and component references, photographs and issue details. We’ll agree the return or replacement solution and related freight for the order, including the matching group where appearance continuity matters.

PRODUCT-SPECIFIC QUESTIONS

Questions about Walnut Veneer MDF

Is this natural walnut veneer or walnut-colour melamine?

Choose this product for natural walnut veneer over MDF. For a printed walnut decor, compare woodgrain melamine MDF. Our team helps select the face material, edges and delivered finish around the project you are making.

Can we order a dark walnut face without conspicuous pale strips?

Yes. Bring a finished reference and mark the visible positions where you want darker, quieter colour. We help select the offered natural range and the placement of lighter areas around your actual front layout.

Do AAA and AA define the same appearance in every quotation?

Use the AAA or AA trade reference with the selected physical range and appearance brief. Define colour contrast, figure, joins, natural features and permitted repairs where they will be seen on the component.

Does one sheet guarantee continuous grain across three doors?

A common source sheet helps preserve the known positions for the group. Review the actual veneer joins, saw cuts, prepared edges and installed gaps in the assembled layout to develop the grain relationship you want across the doors.

When should I choose the 1830mm-wide walnut MDF sheet?

Choose the wider format where it supports your required adjoining-face arrangement or component dimensions. Send the full elevation, blank and finished sizes, grain direction and accepted face range. We compare the formats around the actual usable layout and your workshop capacity.

How should I compare standard and wide-sheet walnut MDF orders?

Compare the same accepted face range, complete matching groups, MDF construction and supplied processing. Include usable part quantities, handling, edges, coating, packing and freight so the quotation reflects the sheets or components your workshop will receive.

How do I specify blank and finished sizes for walnut fronts?

Start with the finished drawing and supplied stage. Keep trimming, banding or solid lipping, profiling and coating with the production blank, along with grain direction and part position. Identify which dimensions and tolerances apply when the component is delivered.

Is 18mm the MDF core thickness or the delivered veneered thickness?

The order must identify the measurement stage. An 18mm substrate and an 18mm delivered veneered panel are different instructions. We agree the selected thickness limits and whether they apply before or after subsequent sanding and finishing.

What information do you need for shelves or moving walnut fronts?

Send the complete component drawing, dimensions, intended duty, supports and fixing details. For a moving front, include the actual finished mass and hardware. We help select the MDF construction and relevant records, with the complete component and fitting checks kept alongside the order.

Can you help with waterproof walnut MDF requirements?

Yes. Send the service conditions, exposure, exposed edges and openings. We help choose the moisture-performance MDF, reverse, finish and protection for that duty, with the relevant method and documents for the selected panel or assembly.

Can the MDF edges simply be stained to match walnut?

Choose a prepared and coated MDF edge for a colour-matched detail, or walnut veneer banding or a solid lip for a wood-faced edge. Compare the bonded corner with the broad face after the proposed finish to select the transition.

Will a routed finger pull keep the walnut appearance inside the cut?

Bring the pull section and depth so we can plan the walnut edge construction or exposed-MDF finish around the routed cut. A coating, lip or another specified detail can form part of the chosen profile; include it in the sample.

Can the face screw-withdrawal figure be used for an edge fixing?

Plan the actual face or edge fixing with its screw, pilot hole, penetration, edge distance and board condition. They are different arrangements, so use the selected board and hardware requirements for the complete connection.

Can both sides have a selected walnut appearance?

Yes. Show both visible sides, grain directions and finishes. We develop the reverse construction and selected face range around the complete two-sided component.

What sample is useful before ordering a full furniture batch?

Compare a representative walnut range, adjoining faces and an actual finished edge. Add the reverse and critical profile or fitting. For a three-front bank, include all positions in the appearance review before choosing the group.

Can a new front be matched to an older walnut cabinet?

Bring a current physical reference with the earlier material and finish records. Identify the surrounding parts and whether you need one front or a complete group, and our team helps develop the new selection around that furniture.

How should selected fronts be labelled and packed?

Keep the front-view code, top mark and matching group with each part through machining, finishing and packing. Link reserves to their intended groups and use the pack list to check complete sets on receipt.

What should we send for a walnut veneer MDF quotation?

Start with a walnut or finish reference and your furniture or interior drawing. Share the sizes, quantity, destination and timing you know, marking which fronts sit together. Our team helps complete the sheet format, MDF grade, reverse, edges, machining and sample plan for your quotation.

How long does production take and how are orders shipped?

Production takes 7–10 days according to the confirmed order. Panels ship by container, with freight and delivery terms agreed for your destination. Supply includes a 180-day warranty; return or replacement arrangements and related freight are agreed for the order and issue.

Compare the adjacent options

CONTACT OUR FACTORY

Bring your walnut furniture or interior project to our factory.

Start with a furniture elevation, walnut reference or finished corner. Our team helps develop the face range, matching, sheet format and delivered finish, then prepare the sample and quotation for your sheets or components.

  • Face material: Natural walnut veneer over MDF; species identity and selection stated for the order
  • Sheet formats: 1220 × 2440mm; 1830 × 2440mm
  • Thickness range: 2–30mm; selected thickness, measurement stage and tolerance agreed

Have a front layout or walnut range reference? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗