PLYWOOD & MDF · CHINA

Black film-faced plywood stacked in our workshop with smooth dark faces and blue-painted edgesView our black film face and protected edges

OUR FACTORY · PRODUCT DETAILS

18mm Black Film Faced Plywood

The black-film panel for your next concrete pour.

Choose the core, WBP bond and film weight for your formwork budget and reuse plan. We manufacture 18mm black film faced plywood in full sheets or cut parts, with samples and export supply direct from our factory in China.

Core options
Poplar / Combi / Eucalyptus / Birch
Film weights
120 / 135 / 180 / 220 g/m²
Supply
Full sheets / Cut components

Made to order · 10–15 days production · Container shipping

CONSTRUCTION & SUPPLY CONDITION

18mm Black Film Faced Plywood specification

Our product configuration and order requirements
Nominal thickness18mm
Core optionsPoplar, combi, eucalyptus hardwood or birch
Black film weights120, 135, 180 or 220 g/m²; specify each working face
Adhesive optionsPhenolic WBP or high-melamine WBP
Sheet sizes1220 × 2440, 1250 × 2500, 1200 × 2400 or 1500 × 3000mm; cut sizes available
Face layoutF/F: smooth / smooth; F/W: smooth / wiremesh
Standard thickness reference13 plies; 17.7mm reference average; 17.1–18.1mm interval
Calibrated-core optionTwo-time pressed core; 18mm ±0.35mm finished thickness; length/width ±1.0mm
Sheet weight referenceAbout 33.2 kg for 1220 × 2440 × 18mm combi core at a 620 kg/m³ loading basis, before packaging
Edge treatmentSealed sheet edges; include new cuts and holes in the finished-part protection
Processing and brandingFull sheets, cut components, drilling and custom logo film
Order specificationSelect the core, film, bond, thickness configuration, quantity and destination

Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.

CHOOSE THE CORE FOR YOUR JOB

Put your budget into the panel that does the work.

Two black 18mm sheets can look alike and still serve different jobs. Choose the core for your handling and formwork needs, the bond for the exposure, and the film for the concrete finish. We manufacture full sheets and cut components, so you can buy the combination your site or workshop actually uses.

Start with your application and purchasing priority
Core optionA useful starting point forWhat to compare
PoplarCost-conscious formwork orders and easier sheet handlingPanel weight, support layout and the number of uses you are planning
CombiGeneral concrete forming with a balance of weight and constructionThe veneer mix, 13-ply option and delivered cost for the required working faces
Eucalyptus hardwoodRepeated forming and demanding handlingCore construction, bond, film weight and the panel condition after a working trial
BirchSystem formwork, machined components and dimension-sensitive assembliesFinished thickness, layup and the panel properties required by your form design

Our two-time-pressed option uses a calibrated core before film lamination. It is worth comparing when panel joints, accessories or repeat components need a tighter finished fit. If you are replacing an existing board, send its dimensions and a face-and-edge photo; we can recommend a corresponding supply configuration.

BLACK FILM · WBP BOND · YOUR CONCRETE FINISH

Choose the film and glue together.

Film weights: 120, 135, 180 or 220 g/m²

Choose the film around the surface finish and reuse plan. Compare 120/135 g/m² options for your standard forming work and 180/220 g/m² where a heavier overlay is part of the specification. Keep the film weight for each working face on the quotation, so the purchase can be repeated without relying on colour alone.

Phenolic WBP or high-melamine WBP

Both adhesive options are available in our film-panel range. Tell us whether the job involves wet concrete, repeated wetting or another exposure. We match the core and adhesive to that duty and include the relevant bonding requirements in the order specification.

One working face or two?

F/F means smooth film on both sides. For reversible formwork, request the required film and appearance on both working faces. If only one side touches concrete, give the reverse its own handling or attachment requirement. This helps you compare prices for the same usable panel.

F/W means smooth film on one side and wiremesh on the other. Choose this arrangement for a component that needs the textured face. For flooring or access panels, explore our non-slip film plywood range and include the loading and slip requirement.

Choose black film for the finish you want to deliver.

For visible concrete, agree the film texture and the condition of the contact area, including joints, tie holes and any permitted repairs. A panel trial with your concrete and release agent helps you check the finish before a larger order. For a brown-film alternative, compare 18mm Brown Film Faced Plywood using the same core, bond and film weight.

18MM CONSTRUCTION & FINISHED FIT

Choose the thickness range that fits your formwork.

Keep the selected construction on the order. The standard thickness reference and the calibrated-core option below are separate choices; your quotation identifies the one being supplied.

Thickness references for two supply configurations
Configuration18mm referenceUse in the purchase
Standard construction reference13 plies; 17.7mm reference average; 17.1–18.1mm finished intervalCompare against your joint and accessory fit; record the chosen core and measurement method
Two-time-pressed, calibrated coreNominal 18mm; ±0.35mm thickness tolerance; ±1.0mm length/width toleranceSelect this option when you need the calibrated-core tolerance, with the film and finished sheet dimensions stated together

The calibrated-core figures are part of our film-panel supply data, which includes black film. The 17.7mm average belongs to the standard reference row. We keep these dimensions separate when preparing the specification for your order.

Check joints and accessories using finished thickness.

Measure the completed film-faced panel at the agreed positions. For adjacent panels, the finished thickness affects the working-face level at the joint. For opposing forms, both panel thicknesses affect the clear opening. Bring a critical fit or machined recess into the drawing so it can be checked on a finished component.

If your drawing calls for 3/4 inch, that dimension is 19.05mm. Tell us the actual fit you need when comparing it with nominal 18mm. The formwork design supplies the loads, support spacing and fixing detail for the selected panel.

Compare other thicknesses and ply counts
Thickness and ply-count references for the standard construction
Nominal thicknessReference pliesReference averageInterval
6mm56.4mm6.1–6.9mm
9mm79.2mm8.8–9.5mm
12mm912.0mm11.5–12.5mm
15mm1114.9mm14.3–15.3mm
18mm1317.7mm17.1–18.1mm
21mm1520.5mm20.0–20.9mm
24mm1723.4mm22.9–23.7mm
27mm1926.5mm25.8–26.8mm
30mm2129.4mm28.7–29.9mm
35mm2535.0mm33.6–35.4mm
40mm2938.7mm38.4–41.2mm

SHEET SIZES & LOADING

Buy the sheet size that works for your cutting plan.

Our film-panel range includes 1220 × 2440, 1250 × 2500, 1200 × 2400 and 1500 × 3000mm. We also supply cut sizes. A larger sheet can help with a continuous form face; a finished cutting list lets us compare material use, machining and packing for the parts you need.

Weight and loading reference for one combi-core configuration
Sheet size and thickness1220 × 2440 × 18mm nominal
Construction and loading density13-ply combi core; 620 kg/m³ loading basis
Approximate sheet weight33.2 kg, before export packaging
Approximate 40HQ quantity807 sheets on a 26.8-tonne panel allowance

These loading figures apply to the configuration shown. Core, sheet format and finished thickness change the sheet weight. We prepare the final loading plan with bundle dimensions, packing weight, container limits and destination requirements.

Send your quantity in sheets, cubic metres or finished pieces. We can quote full-sheet supply and processed components on the same basis, including the required working faces and separately identified spare parts.

WHERE THE PANEL EARNS ITS PLACE

From concrete form faces to finished components.

Walls, columns and slab formwork

A smooth black working face supports the concrete finish you are aiming for. Choose the core and thickness for the form design, then plan joints, release treatment and edge protection. For a broader forming specification, see 18mm Concrete Shuttering Plywood.

Precast moulds and repeat components

Order full sheets or machined parts for returns, recesses and repeated mould sections. Keep the accepted face finish and drawing revision with the production order, making subsequent batches easier to match.

Transport and industrial linings

Use the smooth face for a lining or select the textured reverse where the component needs it. Share the load, wear, cleaning and exposure conditions so we can select the appropriate face arrangement and core.

Furniture, enclosures and packing

For a black-film interior component, plan visible faces, edge appearance and fixings together. We can supply finished dimensions and grouped components to reduce cutting and sorting in your workshop.

MOVE FROM A SHORTLIST TO A WORKING PANEL

Choose a sample that answers your next question.

Face-and-core sample

Use a piece of the chosen 18mm construction to compare black film, reverse face, veneer layup and sealed edges. Include a machined edge or fixing detail if that is the part you need to assess.

Full panel or mould trial

For concrete finish and repeat use, trial the selected panel with your release agent, concrete, support and stripping method. Inspect the concrete result and the film after stripping, then retain the chosen reference for production.

Bring the result back to our team: the finish you liked, any joint or handling issue, and the configuration to repeat. We can then carry those decisions into the factory quotation.

A CLEAR BASIS FOR PRODUCTION AND RECEIVING

Check the details that affect your finished job.

Inspection points tied to the selected order configuration
CheckWhat the record should show
Core and bondSelected species or core mix, layup and the relevant bonding test requirement
Finished dimensionsSheet size, thickness readings and the tolerance for the selected standard or calibrated-core configuration
Film and working facesFilm weight, F/F or F/W arrangement, surface condition and the required concrete-contact areas
Edges and machiningCut sizes, hole positions, breakout, core condition and sealing of freshly exposed edges
Packing and quantitiesAccepted pieces, configuration labels, protected corners and the matched packing list

We can plan dimensional checks, production photographs and third-party inspection around your order. A repeat purchase uses the same core, film and finished-fit reference, with any changes clearly identified before production.

TEST REPORTS FOR YOUR PURCHASING FILE

Connect the report to the panel you are buying.

Hardwood film faced plywood: SGS report

The report covers a hardwood film-faced specimen measuring 448.23 × 456.95 × 18.23mm. It records bending strength of 54.7 MPa and surface bond strength of 1.40 MPa, alongside elasticity and formaldehyde results. Review this hardwood film-panel configuration when building your supplier approval file.

Open the hardwood film plywood test report · PDF

18mm faced hardwood plywood: configuration B

This SGS report separates A, with melamine paper, from B, with film paper. For a film-faced order, use the B configuration and its stated test methods. The report includes bonding, immersion, impact and abrasion sections.

Open the faced hardwood plywood report · PDF

The published results describe the specimens in those reports. For your black-film purchase, send the selected core, adhesive, film weight and required standard; we will connect the relevant report and inspection requirements to that configuration.

Request documents for my black-film configuration · Company certificates

FULL SHEETS, CUT PARTS & OEM SUPPLY

Let the factory prepare the parts your team needs.

Send a cutting list or drawing with the finished sizes, quantities and working-face direction. We can discuss cutting, drilling, edge protection and custom logo film as part of the supply. For repeat parts, one drawing and configuration reference keeps the order easier to reproduce.

Keep both faces identifiable through cutting.

Mark the working face, top edge and part number when the reverse has a different role. Check both sides before allocating pieces; a part selected for one concrete-contact face may need a different appearance choice when both sides will be used. Carry the face direction through drilling, artwork placement and packing.

For a fixed number of finished pieces, compare the delivered-part quotation with full-sheet supply. Include trimming, saw kerf, machining and reserves in the cutting plan. This makes the comparison useful for the parts reaching your workshop.

KEEP THE WORKING FACE READY FOR THE NEXT POUR

Protect the film, edges and fixing areas.

After cutting or drilling

Use suitable support and tooling to limit film breakout. Complete the machining, then seal the new edges, holes and recesses before assembly. The blue-painted perimeter in our product photo shows the supplied edge treatment; freshly cut boundaries need their own protection.

Between concrete pours

Use the selected release agent and remove concrete residue with tools that preserve the film. Check corners, joints and fixing areas before reuse. Stack panels on level supports, keep debris away from working faces and protect the stack during storage and handling.

Plan reuse around the selected construction and actual site conditions. The film, bond, stripping method and care all affect the next use. Tell us your reuse target so we can compare an appropriate core and overlay with your team.

PLAN YOUR PANEL ORDER

Turn your panel choice into a repeatable factory order.

Keep the core, film and finished fit together. Our team brings that configuration into the quotation, samples and production order.

18mm Black Film Faced Plywood

Your chosen black-film configuration

  • Core, WBP adhesive and film weight
  • Standard or calibrated-core thickness configuration
  • Sheet size or cutting list, quantity and destination
View the product specification

Choose a sample for your project

A black-film face-and-core sample or full-panel trial

Compare the face, core and sealed edges, or trial a panel with your concrete and release agent.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/18mm-black-film-faced-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

PRODUCT-SPECIFIC QUESTIONS

Questions about 18mm Black Film Faced Plywood

What sizes and core options can I order?

Our black-film range includes poplar, combi, eucalyptus hardwood and birch cores. Sheet options are 1220 × 2440, 1250 × 2500, 1200 × 2400 and 1500 × 3000mm, with cut sizes available. Send your formwork use and dimensions so we can recommend the construction.

Which film weights and adhesives are available?

Choose 120, 135, 180 or 220 g/m² black film and phenolic WBP or high-melamine WBP adhesive. The quotation records the film for each working face and the selected core and bond, giving you a clear specification for repeat orders.

What is the finished thickness of your 18mm black film faced plywood?

Choose between the standard 13-ply reference, with a 17.7mm average and 17.1–18.1mm interval, and the two-time-pressed calibrated-core option with an 18mm ±0.35mm tolerance. These are separate configurations. Your order specification identifies the selected construction and measurement requirements.

How much does a sheet weigh?

A nominal 1220 × 2440 × 18mm combi-core sheet weighs about 33.2 kg on a 620 kg/m³ loading basis, before packaging. Other cores, formats and finished thicknesses have different weights. We use the selected construction and packing details to plan the shipment.

Can I use both sides for concrete forming?

Yes. Choose F/F smooth film on both sides and request the required working-face condition for both faces. F/W has a smooth side and a wiremesh side for different duties. Include the face arrangement and film weight in your sample request.

Is 18mm black film faced plywood suitable for waterproof formwork?

We supply black film faced plywood for wet concrete forming, combining WBP bonding, a protective film face and sealed edges. Tell us the exposure and reuse target so we can select the appropriate construction. Seal freshly cut edges and holes as part of the formwork preparation.

How many times can I reuse the panel?

The useful reuse count depends on the core, adhesive, film weight and site process. Share your target and concrete-finish requirement; we can compare suitable configurations and arrange a working trial. Careful stripping, cleaning, edge protection and storage help preserve the panel for the next pour.

Can you supply cut parts, samples and an export quotation?

Yes. Send your sheet size or cutting list, quantity and destination. We can include machining, protected edges and custom logo film. Standard samples without special work or a logo have no sample charge; delivery is separate. Production is arranged to order, with a 10–15 day production period and shipment by container.

Compare the adjacent options

CONTACT OUR FACTORY

Get a factory quote for your 18mm black-film order.

Send the panel size or cutting list, quantity and destination. Add your preferred core and film weight, or tell us what you are forming and we will help choose them.

  • Nominal thickness: 18mm
  • Core options: Poplar, combi, eucalyptus hardwood or birch
  • Black film weights: 120, 135, 180 or 220 g/m²; specify each working face

Have a photo, part drawing or working-face reference? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗