PLYWOOD & MDF · CHINA

Black melamine plywood showing its dark decorative faces and layered veneer edgesView the black surface and plywood edge

OUR FACTORY · BLACK MELAMINE PLYWOOD

Black Melamine Plywood

A finished black surface with the character of a plywood edge.

Make black cabinets, shelves and shop fittings with panels from our factory. Choose your plywood core and finish, then order full sheets or cut components with the edges and machining your workshop needs.

Regular thicknesses
9 / 12 / 15 / 16 / 18 / 25 mm
Regular sheets
1220 × 2440 / 1250 × 2500 mm
Core choices
Poplar / combi / eucalyptus / birch

Additional 5 / 21 mm configurations and longer sheet formats are listed in the technical data.

BLACK FINISH · LAYERED PLYWOOD CORE

Black melamine plywood for furniture that looks finished from every side

Black melamine plywood combines a decorative black melamine face with a layered veneer core for cabinets, shelving, shop fittings and interior furniture. Choose a black face on both sides or a coordinated reverse, then finish the perimeter with exposed plywood layers, black paint or matching edge banding.

PanelSource manufactures the panels in Xuzhou, China, supplying full sheets and cut components. Start with your furniture drawing, sheet list or black finish reference. We can turn it into a panel specification, a finished corner sample and a factory quotation.

Keep the plywood edge visible

A black face frames the natural veneer layers. Choose the core for its edge appearance, machining and fastening requirements, with sanding and a protective edge finish included in the component drawing.

Carry black around the perimeter

Matched ABS or PVC banding is available in 0.8–2.0 mm thicknesses. Compare the band and face together for tone, sheen and the corner joint before ordering furniture sets.

TECHNICAL DATA · TDS-PS-23 · Rev 2.0 (Oct 2026)

Black Melamine Plywood technical data

Make dark cabinet fronts, display fittings and furniture parts with black melamine on a plywood core. Choose the black tone, surface texture and reverse together, with coordinated edge banding for the finished component.

Declared values from our technical data sheet TDS-PS-23, Rev 2.0 (Oct 2026). The values for your order are confirmed in the quotation.
Harmonized System (HS) Code4412.33 / 4412.39
Reference StandardsEN 14322, ISO 4586, EN 636-1 / EN 636-2, EPA TSCA Title VI / CARB Phase 2
Service Class / Exposure DutyService Class 1 & 2 (Interior Cabinetry, Wardrobes, Office Furniture & Wall Panels)
Surface OverlayThermally fused melamine-impregnated decorative paper (85–110 g/m² paper basis weight); specify the decorative face and reverse finish
Decor / ColourSolid black melamine decor; choose the black reference, texture and gloss
Surface TextureSmooth matte, embossed or another selected black surface texture
Sub-Face Barrier Veneer0.55–0.80 mm calibrated Eucalyptus or Okoume whole-piece veneer (anti-telegraphing cushion)
Core Veneer OptionsPoplar Core (Lightweight), Combi Core (Standard Cabinet), or 100% Eucalyptus / Birch Core
Adhesive SystemE0 / E1 Melamine-Modified UF or CARB P2 / TSCA Title VI Resin
Edge Banding CompatibilityMatched 0.8–2.0 mm ABS / PVC edge-banding tape available
Sheet FormatsRegular: 1220 × 2440 mm (4' × 8') and 1250 × 2500 mm. Extended: 1220 × 2745 mm (4' × 9') and 1220 × 3050 mm; quote with the selected thickness, core and finish.
Length & Width Tolerance±1.0 mm (EN 315)
Thickness Tolerance±0.25 mm (≤ 15 mm) | ±0.30 mm (16–25 mm) (EN 315 / EN 14322)
Squareness≤ 1.0 mm / m (EN 324-2)
Panel Flatness (Balanced 2-Side Lamination)≤ 1.5 mm / m (EN 14322)
Edge Chipping on Panel Saw (Scoring Blade)≤ 0.3 mm (EN 14323)
Surface properties and poplar/combi cabinet-core performance
Substrate Density, kg/m³540–630 for the poplar/combi cabinet-core configuration; select the density separately for eucalyptus or birch cores.
Test method: EN 323
Moisture Content at Dispatch, %8.0 – 11.0
Test method: EN 322
Bending Strength — Longitudinal (MOR //), MPa≥ 42.0
Test method: EN 310
Modulus of Elasticity — Longitudinal (MOE //), MPa≥ 5,200
Test method: EN 310
Surface Abrasion Resistance (Taber), Revolutions (IP)≥ 150 r for the solid black decor
Test method: EN 14322 / EN 14323
Surface Scratch Resistance, N≥ 1.5 N
Test method: EN 14323
Surface Stain & Household Chemical Resistance, Class (1–5)Class 5 (No visible change to coffee, acetone, alcohol)
Test method: EN 14323
Surface Bond Strength, MPa≥ 1.0
Test method: EN 311
Screw Withdrawal — Face / Edge, N≥ 1,650 (face) / ≥ 1,180 (edge) for the stated cabinet-core configuration
Test method: EN 320
Formaldehyde release — E0 option, mg/m³≤ 0.05 mg/m³ · EN 717-1
Formaldehyde release — TSCA Title VI / CARB P2 option, ppm≤ 0.05 ppm · ASTM E1333
Thickness, ply count, weight and container loading — regular 9, 12, 15, 16, 18 and 25 mm; additional 5 and 21 mm configurations
Nominal Thickness Ply Count Area Weight Sheet Weight (1220x2440) Est. Load / 40HQ
5 mm5 plies2.93 kg/m²8.7 kg~3,080 pcs
9 mm7 plies5.26 kg/m²15.7 kg~1,707 pcs
12 mm9 plies7.02 kg/m²20.9 kg~1,282 pcs
15 mm11 plies8.78 kg/m²26.1 kg~1,026 pcs
16 mm13 plies9.36 kg/m²27.9 kg~960 pcs
18 mm13 plies10.53 kg/m²31.3 kg~856 pcs
21 mm15 plies12.29 kg/m²36.6 kg~732 pcs
25 mm17 plies14.62 kg/m²43.5 kg~616 pcs

Weights and loading quantities use 1220 × 2440 mm sheets at a 585 kg/m³ planning density and approximately 26.8 tonnes of net panels. Core, decor, packing and route payload limits determine the final shipment quantity.

Choose the surface from our melamine colour and woodgrain catalogue, then keep the decor code, texture, reverse and matching edge band with the order.

Order options for Black Melamine Plywood

Sizes, finishes & supply requirements

BLACK FACE & PLYWOOD CONSTRUCTION

Supply options and order specifications
Regular thicknesses9, 12, 15, 16, 18 and 25 mm; additional 5 and 21 mm configurations in TDS-PS-23
Regular sheet formats1220 × 2440 mm and 1250 × 2500 mm
Extended sheet formats1220 × 2745 mm and 1220 × 3050 mm; quote with the selected core, thickness and finish
Core optionsPoplar, combi, eucalyptus or birch plywood
Decorative facesBlack/black or black with a coordinated reverse
Surface textureSmooth matt or embossed black; retain the physical finish reference
Edge finishExposed veneer layers, painted black or 0.8–2.0 mm ABS/PVC banding
Supply stageFull sheets, cut parts, or components with drawing-based drilling, routing and edging
Technical dataTDS-PS-23 Rev 2.0; poplar/combi cabinet-core performance and separate eucalyptus/birch selections
Poplar/combi cabinet-core density540–630 kg/m³ (EN 323); separate density selection for eucalyptus or birch cores
Dispatch moisture8.0–11.0% (EN 322)
Decorative paper basis weight85–110 g/m²; paper basis weight before resin impregnation
Finished thickness tolerance±0.25 mm up to 15 mm; ±0.30 mm at 16–25 mm
Longitudinal bending — cabinet-core configurationMOR ≥42 MPa; MOE ≥5,200 MPa (EN 310)
Solid black surface performanceInitial abrasion ≥150 revolutions; scratch resistance ≥1.5 N, as declared in TDS-PS-23

Send your black decor reference, plywood core and finished dimensions. We’ll help coordinate the faces, edge finish and component requirements in your quotation.

CHOOSE FOR THE PART YOU MAKE

From cabinet interiors to retail displays

Cabinets and wardrobes

Coordinate doors, end panels, shelves and visible interiors. Black on both faces suits parts seen from either side; a different reverse can follow the cabinet's interior finish.

Retail shelving and plinths

A consistent black finish keeps attention on the displayed product. Include shelf undersides, front edges, display lighting and actual span or loading in the component specification.

Office and hospitality furniture

Use exposed plywood edges for contrast or band the perimeter to match a black frame. Cable holes, access panels and fixing heads belong in the same finish schedule as the broad face.

Interior wall and fixture panels

Order panels by elevation or fixture set to keep texture direction and matching groups together. Add the installation's fire or emission requirements to the document request.

For a fibreboard core, compare black melamine MDF. For concrete formwork, choose film-faced shuttering plywood. This page covers decorative melamine-faced plywood for furniture and interiors.

COLOUR · TEXTURE · SHEEN

Match the black face, reverse and adjoining materials

Choose smooth matt or an embossed black texture, with the reverse identified separately. The technical sheet lists decorative paper at 85–110 g/m² basis weight; this is the paper specification, not the resin-inclusive weight of a finished overlay.

  • Black/black: coordinate doors, shelves and panels seen from both sides.
  • Black with a coordinated reverse: identify the interior colour separately from the visible front.
  • Face and adjoining trim: compare black banding, metal frames and handles as a complete finish set.

A physical RAL, NCS, band or frame reference gives us a target for the finish comparison. View adjoining materials together: a matt face, smooth band and powder-coated metal can reflect light differently even when their black tones are close.

For anti-fingerprint, scratch or cleaning performance, include the requirement with the surface order. Matt describes appearance; the selected finish and its performance documents establish additional properties. Browse the melamine colour catalogue to choose a finish direction.

THE EDGE IS PART OF THE DESIGN

Choose an exposed, painted or banded plywood edge

Exposed plywood

Show the natural veneer layers beside the black face. Retain a finished corner showing the selected core, agreed limits for visible gaps, overlaps and repairs, sanding, corner profile and protective coating.

Painted black

Complete a black perimeter with the chosen edge preparation and paint system. Compare its adhesion, sheen and transition at the melamine face after finishing.

ABS or PVC band

Use a coordinated 0.8–2.0 mm band to finish the perimeter. The bonded and trimmed corner shows the face-to-band colour, glue line and profile more clearly than a loose strip.

Where veneer layers remain visible, core selection also controls edge appearance. Keep the finished reference with the order so a later change of core or band can be compared against the same furniture detail.

DRAW THE SIZE YOUR WORKSHOP NEEDS

Separate finished dimensions from the core cutting size

Edge banding changes outside dimensions. For a 600 × 350 mm finished shelf with a net 2 mm front band and 1 mm rear band, the prepared core is 600 × 347 mm. This cutting worksheet keeps the side edges unbanded.

A fixed hole 35 mm from the core front is 37 mm from the finished front after the 2 mm band is added. The 35/37 mm relationship describes the coordinate change; hardware positions come from the actual fitting drawing.

State whether the drawing uses core or finished-edge datums. Use the net band addition after bonding and trimming, and account separately for any later trimming when machining a larger rough blank. Banding the side edges also changes the core width.

BUY FOR USABLE PARTS

Compare sheet formats against your cutting list

Regular sheet formats are 1220 × 2440 mm and 1250 × 2500 mm. TDS-PS-23 also lists longer 1220 × 2745 mm and 1220 × 3050 mm formats; specify the core, thickness and finish combination when requesting them.

View the shelf cutting and banding worksheet

For 600 × 347 mm cores, allow 10 mm trim at each sheet edge and 3 mm between parts for the saw kerf. Compare regular grids in both orientations; a mixed nesting plan may give a different result.

600 × 347mm prepared cores, with assumed 10mm outer trim and 3mm inter-part kerfs
SheetUsable rectangle600 across × 347 along347 across × 600 along
1220 × 2440mm1200 × 2420mm1 × 6 = 6 parts3 × 4 = 12 parts
1250 × 2500mm1230 × 2480mm2 × 7 = 14 parts3 × 4 = 12 parts

Two 600 mm parts plus one kerf need 1203 mm across. Seven 347 mm rows plus six kerfs need 2447 mm along. They fit the larger usable rectangle. The rotated 12-part layout occupies 1047 × 2409 mm and fits either sheet when the surface and component directions permit rotation.

Material planning for 100 shelves, where either orientation is permitted
Sheet optionRegular-grid positions per sheetWhole sheets for 100 partsPurchased sheet area
1220 × 2440mm129 sheets · 108 geometric positions26.7912m²
1250 × 2500mm148 sheets · 112 geometric positions25.0000m²

Finished faces cover 21 m² on one side; prepared cores cover 20.82 m². Front and rear bands total 120 m net. Adding 25 mm at each end of 200 band segments gives 130 m before further process losses. Band width follows the actual panel thickness.

Keep texture and plywood direction with the permitted layout. Add appearance selection, process losses and required spares to the order quantity; cutting positions alone do not establish accepted output or the lowest delivered cost.

CUT · EDGE · DRILL

Protect the black face through machining and assembly

Trial the actual core, black surface and thickness on the machine and tooling used for production. Check both entry and exit faces, the trimmed edge and the finished fitting on a representative part.

Clean cuts and corners

Use tooling appropriate to the panel and follow the machine supplier's setup guidance. The TDS lists edge chipping ≤0.3 mm for panel-saw cutting with a scoring blade; check the working setup against that requirement. Clean supports and separators keep grit away from the face.

Holes, recesses and fittings

Record the drilling face, datum and remaining material beneath blind holes. A countersink or cable opening may expose the pale core at its rim, so include the fastener head, liner or edge treatment in the finished detail.

For machining on both sides, use the double-sided melamine plywood guide to keep A/B faces and reverse-view coordinates clear. Supply part codes with the drawing revision so repeat batches follow the same layout.

KITCHENS · BATHROOMS · EVERYDAY CARE

Choose the plywood and edge protection for the exposure

Need black waterproof furniture panels for a kitchen or bathroom? Send the location and component drawing so we can quote the bonding and protection needed around sinks, floor-level edges, fittings and cut-outs. The decorative face, glue line and finished joints all contribute to the assembly's moisture performance.

Regular configurations serve protected interiors. For more demanding moisture exposure, connect the order to the waterproof melamine plywood range and carry the selected bond and edge treatment into installation details.

Remove loose grit before cleaning with a soft cloth and a compatible cleaner. Check the completed corner after drying for streaks, sheen and edge effects. Keep sheets dry and supported in storage, protect corners and separate loose hardware during transport and assembly.

FROM THE APPROVED FINISH TO THE DELIVERED PACK

Inspect appearance, dimensions and packing together

TDS-PS-23 lists the declared configuration and performance values. Keep the selected core, face pair and thickness beside the required test methods and documents. Poplar/combi cabinet-core values are identified separately from eucalyptus and birch options.

  • Face and edge: compare both visible faces and the completed corner under the selected lighting; identify scratches, residue and texture direction by part.
  • Dimensions: measure thickness, finished size, squareness and hole positions at the supplied processing stage.
  • Packing: check matching groups, quantities, separators, corner protection and shipping marks against the packing list.

Request the technical sheet and inspection or emission documents for your selected construction through product documents. The published report library identifies the tested material and configuration, keeping your purchasing file attached to the panel being ordered.

SEE THE FINISHED DETAIL BEFORE THE FULL ORDER

Choose a face sample, finished corner or machined part

A face swatch helps choose black tone and texture. A finished corner also shows the plywood edge or band joint. For a repeat furniture component, include a real hole, recess or fitting so the sample answers the workshop's decision as well as the designer's.

Send the black reference or adjoining trim, required core and thickness, reverse finish and visible-edge treatment. Retain the accepted sample with its date and drawing revision for production and repeat supply.

PLAN YOUR PANEL ORDER

Turn your finish choice into a production order.

Keep the approved black face, core and completed corner together, then quote the sizes, processing and packing for your furniture.

Black Melamine Plywood

Your panel and supply requirements

  • Core, thickness and sheet or finished-part sizes
  • Black face, reverse and visible-edge finish
  • Quantity, destination and supplied processing stage
View the product specification

Choose a sample for your project

A finished black plywood corner

Compare the actual black face, reverse and core with the chosen exposed, painted or banded edge. Include a fitting or opening where it forms part of the visible detail.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/black-melamine-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

FROM YOUR DRAWING TO A FACTORY ORDER

Get a quote for the black panels your project needs

Send sheet dimensions or a component cutting list, quantities and destination. Add your black finish reference, chosen core and visible-edge detail if available. We will quote the material and processing together, with packing and the supplied stage clearly identified.

For finished components, mark which dimensions include banding, the faces visible after assembly and any drilling or routing. For repeat orders, include the previous order or retained sample and the changes you need.

Production takes 10–15 days according to the order schedule, with container shipment and 180-day after-sales warranty. Minimum order, freight terms and document requirements are set out in the quotation. Email your list to sales@plywoodsupplier.cn or start a product enquiry.

PRODUCT-SPECIFIC QUESTIONS

Questions about black melamine plywood

Which thicknesses and sizes can I order?

Regular thicknesses are 9, 12, 15, 16, 18 and 25 mm, in 1220 × 2440 mm and 1250 × 2500 mm formats. TDS-PS-23 also lists 5 and 21 mm configurations and extended 1220 × 2745 mm and 1220 × 3050 mm formats. Include the required core and black finish when requesting these combinations.

Is the core black all the way through?

The melamine gives the broad face its black finish; the plywood core retains its veneer layers. Leave them visible with a finished exposed edge, or complete the black perimeter with paint or edge banding.

Which core should I choose for visible plywood edges?

Compare the actual poplar, combi, eucalyptus or birch construction at a finished corner. Layer appearance, permitted repairs and the protective edge coating matter alongside the machining and fastening requirements. The TDS identifies poplar/combi cabinet-core values separately from the other options.

Can you match black edge banding and a metal frame?

Yes. Send the band, frame or physical colour reference. Compare tone, texture and sheen on the assembled corner under the intended lighting. Matching ABS/PVC bands are available in 0.8–2.0 mm thicknesses.

Is matt black an anti-fingerprint finish?

Matt describes the appearance. Include any anti-fingerprint, scratch or cleaning requirement with the surface request so the selected finish and supporting documents cover the performance needed.

Can the reverse be a different colour?

Yes. Choose black on both faces or identify a coordinated reverse separately, including the texture and any face visible when a door is open or a shelf is viewed from below.

Can I use black melamine plywood for kitchen or bathroom furniture?

Yes. Send the component and exposure details so we can select the plywood bond and protection around joints, edges, holes and cut-outs. Regular configurations are for protected interiors; the complete furniture detail sets the moisture-protection requirement.

Can you supply cut, drilled or edged components?

Yes. Send finished dimensions, part codes, quantities and drawings. Identify the supplied stage, core or finished-edge datums, and any edge-band build-up. For the 600 × 350 mm shelf worksheet, 2 mm front and 1 mm rear bands give a 600 × 347 mm prepared core.

What does the container-loading table represent?

It uses 1220 × 2440 mm panels at a planning density of 585 kg/m³ and approximately 26.8 tonnes of net panels. The 18 mm row lists 31.3 kg per sheet and about 856 sheets per 40HQ. Core, packing and route payload limits determine the shipment quantity.

How do I get pricing, samples and production timing?

Send sizes, quantity, destination and your black finish or furniture drawing. We quote sheets or processed components and arrange a face or finished-corner sample. Production is scheduled for 10–15 days according to the order; freight terms, minimum order and documents are confirmed in the quotation.

CONTACT OUR FACTORY

Get a factory quote for black melamine plywood.

Send a sheet list or component drawing, quantity and destination. Include the finish reference and visible edges you want; our team will put the panel and processing into one quotation.

  • Black decor reference, texture, gloss and adjoining materials
  • Matching groups, visible reverse and texture direction on the layout
  • Plywood core, finished thickness, supplied sizes and quantities
  • Exposed, painted or banded edges, hardware, openings and sample requirements
  • Documents, destination and delivery window

Send drawings or a black finish reference to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗