PLYWOOD & MDF · CHINA

Pencil Cedar plywood stack showing a pale wood veneer face and layered panel edgesView our Pencil Cedar plywood face and layered edges

OUR FACTORY · PRODUCT DETAILS

CE Pencil Cedar Plywood

Bring a natural wood finish and a clear supply plan to your next project.

Source Pencil Cedar plywood for interior linings, furniture and project components from our factory in China. Choose 2–30mm sheets, custom sizes or machined parts, with the face, core and finish developed around your drawing. Send your project brief and any CE-related purchasing requirement; we will help you move from panel selection to samples, quotation and delivery.

Decorative surface
Pencil Cedar veneer
Thickness range
2–30mm
Standard formats
1220 × 2440 / 1250 × 2500 / 1500 × 3000mm

Available to order · 10–15 days production · Container shipping

CONSTRUCTION & SUPPLY CONDITION

CE Pencil Cedar Plywood specification

Our product configuration and order requirements
Sheet formats1220 × 2440mm, 1250 × 2500mm and 1500 × 3000mm; custom sizes and cut parts by enquiry.
Thickness range2–30mm; specify the selected nominal in millimetres.
Supply scopeFull sheets, cut blanks or processed components from our factory in Xuzhou, Jiangsu, China.
Face and reversePencil Cedar veneer; identify both viewing sides and the required finished appearance.
Core choicesPoplar, hardwood, birch and eucalyptus; select the core and layup with the component.
Face/reverse grade pairsBB/BB, BB/CC, CC/CC and CC/DD, with colour, features, repairs and sanding selected with the sample.
Commercial thin sizes1/8 inch: 2.7–3.6mm; 1/4 inch: 6–6.5mm. State the required nominal millimetre size.
Commercial thick sizes1/2 inch: 12–12.7mm; 5/8 inch: 15–16mm; 3/4 inch: 18–19mm. Exact inch conversions are shown in the thickness guide.
Thickness tolerances2–9mm: ±0.2mm; 9–30mm: ±0.3mm. For 9mm, select and record the required band with the quotation.
Moisture content10–15% reference range; specify delivery condition and measurement method for the receiving workshop.
Bond optionsMR, melamine and WBP phenolic; select bonding performance for the intended service conditions.
Emission requirementsE1 or E2 references, with the applicable method and records identified separately from bonding.
Joint arrangementsOverlap, end, scarf and finger joint options; identify their location and role in the panel construction.
Supplied finish and processingGrain direction, sanding, cut size, machining, edge treatment and coating recorded with the drawing and sample.
Project performanceIntended use, service conditions and required properties or classes linked to the selected construction.
Purchasing documentsApplicable CE declaration, FPC and test or classification records; separate ISO 9001 or CARB requirements included where requested.
Loading and packingStarting references: 8 pallets/20ft, 16 pallets/40ft and 18 pallets/40HQ. Pack sizes, sheet counts and payload planned for the selected order.
Order and delivery identityConnect quotation line, accepted sample, relevant documents, drawing revision, pack or part reference and delivery quantity.

Choose the construction, finish and size for your project. We’ll bring the selected options and finished tolerances together in your quotation.

PENCIL CEDAR FACE & REVERSE · SELECTED CORE & FINISH

Choose the wood character for your finished component

Bring Pencil Cedar's natural wood character to interior linings, furniture and project components. Our factory in Xuzhou, Jiangsu, China offers 2–30mm plywood with Pencil Cedar faces and a choice of poplar, hardwood, birch or eucalyptus core. We can develop the sheet or part specification, finish sample and CE-related purchasing documents around your project.

Select BB/BB, BB/CC, CC/CC or CC/DD face-and-reverse pairings. Review colour, veneer joints, permitted repairs and sanding condition under the intended finish. Mark both viewing sides, including the reverse seen at returns, openings or removable access points.

Panels visible from both sides

For partitions, open furniture and freestanding units, compare the two faces together. Include the exposed core edge or selected edge material in the appearance sample.

Visible face with a concealed reverse

For linings and framed parts, show the concealed areas and the edges visible during installation or maintenance. Put the appearance selection where it contributes to the completed work.

Choose the inner construction and bond

Keep the core species and layup with the component drawing. For overlap, end, scarf or finger-joint options, identify their location in the veneer or component, especially at routed edges, openings and visible faces.

Select MR, melamine or WBP phenolic bonding for the intended conditions. Specify E1 or E2 emissions separately with the required method or supporting information. Include any species or origin requirement with the enquiry.

For broader decorative selection, explore Pencil Cedar Plywood Sheets. Here, the panel, sample and project-document route are planned together, using this configuration's own thickness and moisture references.

THE COMPONENT, SUPPLY STAGE & PROJECT REQUIREMENT

Turn the design into a panel schedule

Start with what you are making and how it is supported, joined or installed. Share the destination, service conditions and required appearance, with the performance or document clause when available.

Choose the work to be supplied

Compare full sheets, cut blanks and machined or finished components. State the dimensions at the supplied stage and list cutting, sanding, edging, drilling and coating separately.

Plan the project records

For a construction component, identify its intended use and required characteristics. For furniture or packing, include the corresponding contract and material requirements. Our team can help complete the panel schedule from the details you have.

Keep alternatives on separate quotation lines with their core, dimensions, finish, sample and applicable records. Tell us when material approval and delivery are needed, so sample and document handover can follow the project schedule.

LININGS, FURNITURE & PROJECT COMPONENTS

Select the construction around its installed or assembled use

Visible wall linings

Send panel sizes, grain direction, joints, corners and service openings. Show the support, coating and edges visible at returns. Include any required reaction-to-fire classification with the actual lining arrangement and relevant product or assembly scope.

Structural panel components

Provide the component drawing, service condition, orientation and required declared properties. Keep supports, fasteners, edge distances and loading with the project design; review material alternatives with that design and the appropriate panel information.

Furniture for a fit-out package

Choose visible faces, finished edges, fittings and the contract's emission requirement. Sample the actual coating and joint. Keep the furniture material lines distinct from construction-product requirements elsewhere in the project.

Framed infill and removable panels

Show the opening, capture or fixing detail, insertion route and required clearance. Use the selected thickness interval with coatings where they enter a groove or profile. Include the reverse visible when the panel opens and any complete assembly requirements.

Coordinated decorative interiors

Map panels that will meet in receptions, shops or room sets. Review a group of finished faces, mark installation order and plan matching spares or replacement pieces with the main selection.

Packing and transport parts

Send the payload, fastenings, support and handling conditions. Identify where the Pencil Cedar face is visible or contacts the contents, alongside any separate pallet, solid-timber support or shipment-packing requirements.

NOMINAL MILLIMETRES, COMMERCIAL SIZES & FIT

Specify the thickness your drawing needs

Choose the nominal millimetre thickness within the 2–30mm range. The commercial inch rows help locate the product choice; the exact conversion gives the dimension when a drawing specifies an inch value. Put that selected nominal on the order line.

Commercial thickness references and exact inch conversions
Commercial referenceMillimetre rangeExact inch conversionPurchasing decision
1/8 inch2.7–3.6mm3.175mmSelect the required nominal millimetre thickness
1/4 inch6–6.5mm6.35mmDistinguish 6mm from 6.5mm in the drawing
1/2 inch12–12.7mm12.7mmState whether 12mm or 12.7mm is required
5/8 inch15–16mm15.875mmMatch the selected value to fittings and evidence
3/4 inch18–19mm19.05mmSelect 18mm or 19mm, or specify the exact conversion of 19.05mm

For an exact 3/4 inch requirement, specify 19.05mm. The commercial 18–19mm range contains two different nominal choices for a fitting or assembly. Send the required dimension and finished limits so the panel can be quoted around that fit.

Select the 9mm tolerance with the quotation

The supply references are 2–9mm at ±0.2mm and 9–30mm at ±0.3mm. At their shared 9mm boundary, specify the required ±0.2mm or ±0.3mm option on the quotation and drawing. This gives the workshop one agreed interval for the selected order.

Thickness intervals calculated from the references
Selected nominalTolerance usedCalculated intervalWhat to confirm
3mm±0.2mm2.8–3.2mmThin-part fit and the supplied sanding condition
9mm — narrower reference±0.2mm8.8–9.2mmState this tolerance on the order line
9mm — wider reference±0.3mm8.7–9.3mmState this tolerance on the order line
18mm±0.3mm17.7–18.3mmComponent fit and the covered nominal construction
19mm±0.3mm18.7–19.3mmTreat as a distinct nominal selection from 18mm

Keep the supplied sanding condition, measuring positions, conditioning and inspection frequency with the agreed limits. Add coating, receiving-profile variation and process allowances when defining a completed groove, rebate or bonded assembly.

THREE SHEET FORMATS · PARTS & PACKING

Choose the format around the cutting and delivery plan

Select 1220 × 2440mm, 1250 × 2500mm or 1500 × 3000mm, or send a custom-size drawing. Include grain direction, edge trimming, saw kerf, machine holding space and visible matching groups.

For full-height linings, show final height, joint position and cleanup allowance. For furniture, provide the part list and any same-sheet pairing. For structural work, use the orientation and dimensions from the project design with the selected panel information.

Sheet formats at nominal 18mm thickness
Sheet formatOne-face areaNominal panel volumePurchase check
1220 × 2440mm2.9768m²0.0535824m³Component fit after trimming and saw kerfs
1250 × 2500mm3.1250m²0.0562500m³Extra usable width and length for the actual drawing
1500 × 3000mm4.5000m²0.0810000m³Large-part handling, face selection and packing dimensions

The table uses width × length × nominal 18mm thickness. Choose the core and actual packing arrangement for shipment mass and package volume, with protective materials included separately.

Plan container loading for the selected order

Starting loading references are 8 pallets for a 20ft container, 16 for a 40ft and 18 for a 40HQ. Plan sheets per pallet, pack footprint and height, handling and payload with the selected sheet or part dimensions. Identify large 1500 × 3000mm sheets or mixed components when requesting the packing plan.

Use actual pack dimensions and gross mass with the container and route limits. Keep sheet or part quantities in the order units, showing area or volume conversions where the quotation or invoice uses them.

Keep staged deliveries identifiable

Assign order lines, quantities, pack references and applicable document versions to each shipment. Tell us whether packs are opened by a distributor, workshop or project site so split packs and cut parts remain connected to their material reference.

18MM OR 19MM · FINISHED FIT & PURCHASE VOLUME

Compare alternatives at the same component and supply stage

Use an order of 80 sheets at 1250 × 2500 × 18mm to compare a 19mm alternative. Keep the face, reverse, core, bond, intended use and applicable records with each quoted line. Compare the actual delivered thickness and component fit alongside price and processing.

The commercial 3/4 inch family includes 18mm and 19mm, while the ±0.3mm reference gives separate thickness intervals. For this joint calculation, use a fixed 18.4mm groove width.

Separate 18mm and 19mm thickness intervalsA common linear scale runs from 17 to 20mm. The 18mm interval is 17.7 to 18.3mm. The 19mm interval is 18.7 to 19.3mm. A dashed line at a selected 18.4mm groove shows that the first fits arithmetically and the second is too thick.Thickness intervals · millimetres18mm panel: 17.7–18.319mm panel: 18.7–19.317181920Dashed line: selected 18.4mm groove
Two thickness selections on one scale. The intervals use the ±0.3mm supply reference. The fixed 18.4mm groove is the selected design input; include actual groove variation and coating when specifying the finished joint.

The 18mm interval gives 0.1–0.7mm total thickness clearance. The 19mm interval gives −0.9 to −0.3mm clearance, or 0.3–0.9mm interference. These values use the fixed groove with no added coating or groove variation. Include those actual limits and the required insertion or retention fit in the completed-joint sample.

80-sheet order comparison at 1250 × 2500mm
Order optionOne-sheet nominal volume80-sheet nominal volumeOne-face area
18mm0.05625m³4.50000m³250.0000m²
19mm alternative0.059375m³4.75000m³250.0000m²

The 19mm alternative contains 0.25m³ more nominal panel material, a 5.56% increase relative to 4.5m³, with unchanged broad-face area. Compare actual quotations using their stated sheet or cubic-metre basis and the same supplied work, packing and delivery scope.

For a change of core, bond, joint arrangement, veneer build or factory finish, update the sample, quotation and affected drawings together. Check the applicable product scope for the revised construction and retain its documents with the final order selection.

CONDITIONING, MACHINING & FINISHED APPEARANCE

Prepare the selected construction for your workshop

This range uses a 10–15% moisture-content reference. Plan delivery condition and measurement with the intended machining, bonding and finish. Store sheets flat on dry supports, protected from wet floors and exposure, with pack identity retained during receiving and conditioning.

Read machining and workshop guidance

Machine the visible face and core together

Mark the face, reverse and grain before cutting. Keep the trim, kerf and matching groups on the schedule, distinguishing the cut blank from dimensions after lipping, sanding or coating.

Trial the saw or cutter setup in the chosen core. Review veneer breakout, routed edges, rebates and exposed layers under the intended finish. Retain the useful component sample and setup with the production drawing.

Develop the edge and receiving detail

Specify whether an edge remains exposed, receives lipping or banding, is painted, or is concealed by a profile. Put its completed width, thickness and datum on the drawing where edge treatment changes the fit.

For clear finishes, compare face, repairs, veneer joints and edge material under the selected coating. Coordinate any sanding with the available decorative veneer and the required finished thickness.

Include machining in the project configuration

Show coatings, perforations, grooves, openings and fixings on the component drawing. Where the project requires fire, acoustic or structural characteristics, connect the finished arrangement to the relevant product or assembly information.

For load-carrying work, retain support spacing, fasteners, edge distances and loads with the designer's requirements and the selected construction's declared properties.

Retain the material reference after cutting

Use the workshop record to carry one order line through pack, sheet and cut-part identities. Choose marks that remain useful without affecting the decorative face, alongside the applicable product-document references.

Order, sheet and cut-part identity recordAn order line for an identified 18mm configuration is connected to pack P01. Sheet P01-S07 retains that connection. Parts P01-S07-A and P01-S07-B retain the same source sheet. These are workshop identifiers, not certificate or CE-marking numbers.Workshop identity recordOrder line · selected 18mm configurationPack P01 · order line recordedKeep the applicable document referencesSheet P01-S07 · face direction recordedKeep the cutting drawing and revisionParts P01-S07-A and P01-S07-B
Preserve the relationship as the material changes form. Keep the source-sheet connection, drawing revision and applicable product documents with each component set.

Keep reusable offcuts connected to the same source sheet, core and bond. Record the drawing revision and matching group with later part allocations or replacements.

INTENDED USE, DECLARATION & FACTORY PRODUCTION CONTROL

Plan the CE route with the selected panel

For construction projects, send the intended use, destination, required characteristics and applicable standard with the panel schedule. We help organise the declaration, factory production control information and relevant reports for the construction being quoted.

Use the assessment system applicable to the product

Under the CPR-2011 framework, system 2+ allocates assessment and verification tasks between the manufacturer and a notified factory production control certification body. The manufacturer assesses product performance, operates factory production control and tests samples under the prescribed plan. The notified body performs the relevant factory inspection and continuing surveillance, and decides on FPC certification.

The allocation appears in the amendment to Annex V of Regulation (EU) 305/2011. Keep the FPC certificate's covered products and factory with the manufacturer's declaration of the required performance characteristics where this route applies.

Connect the route to the intended construction use

EN 13986 covers wood-based panels for construction, including plywood and veneered panels, with specified structural and non-structural uses and service conditions. The EVS listing for EN 13986:2004+A1:2015 describes that scope. Identify the furniture, packing or construction role of each material line so its purchasing information follows the intended use.

During the transition to CPR-2024, the applicable route follows the product specification as families move to the new framework. The Commission's CPR-2024 transition guidance explains this process.

The applicable document is a Declaration of Performance under CPR-2011 or a Declaration of Performance and Conformity under CPR-2024. Follow the relevant product route using the Commission's declaration and CE-marking guidance.

Product records connected to the project and delivery
InformationWhat to match to the orderWhat remains a separate decision
Applicable performance declarationProduct identity, intended use, technical reference and required declared characteristicsThe appearance sample and the suitability of the complete installed design
FPC certificate where system 2+ appliesManufacturer, factory, covered products, issuing body and relevant scopeThe declaration and the specific performance required by the project
Test or classification reportTested construction, method, specimen condition, result and stated field of applicationWhether a changed thickness, coating or assembly is covered
Appearance and machining sampleFace, reverse, core, thickness, finishing process and sample identityRegulatory documentation and declared technical performance
Packing list and delivery identificationOrder line, construction reference, pack identity, quantity and destinationReceiving review against the selected specification

Keep the order reference with each record

Connect the quoted panel to the covered construction, thicknesses and uses, including where a document names a broader product group. Retain the required values or classes with the project approval and the sample reference with its finish.

For notified-body information, the Commission's construction support tools provide the NANDO route. Keep the relevant body, task and certificate scope with the panel information.

Share separate ISO 9001 management-system, CARB emission or other purchasing requirements when requested. We can plan the relevant records with the selected configuration, alongside the appearance and machining sample.

FINISHED FACE, FITTED COMPONENT & PROJECT RECORDS

Choose a sample that moves the project forward

Request a face-and-edge sample for the intended finish, a larger coordinated set for a room or furniture group, or a machined component for a groove, rebate or fixing. Use the selected core and thickness for the joint that controls your decision.

Review the appearance after finishing

Include the reverse, edge material, permitted repairs and veneer joints. Retain a bare reference alongside the coated surface where the finish changes colour or texture.

Review the component at its assembly stage

Use the receiving profile, fitting and final dimensions with the actual process. Keep the sample identity, drawing revision and the useful machining setup together.

Add the project-document checklist when available so the panel choice and required records develop together. Required fire or structural characteristics are reviewed through the applicable technical scope alongside the physical component trial.

A photo, sketch or sheet list is enough to start. Our custom-size service supports dimensioned sheet and part enquiries; the production and quality page explains the factory process. Tell us which core, format or supplied finish you want to compare and we can quote the alternatives separately.

SELECTED CONSTRUCTION, APPEARANCE & DELIVERY IDENTITY

Make the handover useful to purchasing and the workshop

Agree the measurement stage and receiving criteria with the order. Keep pack identification and check quantities by material line before mixing or cutting sheets, with the selected sample and applicable document versions available.

Delivery checks for a documented Pencil Cedar order
CheckCompare againstRecord with the result
Construction identityQuoted face, reverse, core, nominal thickness, bond and product referencePack identity and the affected order line
Required documentsAgreed list, applicable scope and the delivered constructionDocument references, versions and any clarification requested
Dimensions and thicknessSelected millimetre nominal, agreed tolerance and measurement methodMeasuring positions, readings and supplied condition
Face and reverseAgreed grade pair, appearance range and finish sampleViewing side, feature location and intended component
Edges and handling conditionRequired edge condition and permitted handling damageLocation, extent, packing condition and photographs
Moisture conditionAgreed requirement and method; reference 10–15%Material identity, method, conditions and readings
Quantities and allocationSheet or part counts by configuration and delivery stagePack counts, sheet counts and any separated material

Review the construction and dimensions, visible appearance and required records against the same panel reference. Retain measurements, photographs and pack identity with any point requiring attention.

For a discrepancy, send the order line, pack reference, affected quantity and a brief description. Add overall and close photographs, and measurement positions and readings where relevant. Keep cut-part and source-sheet links with any later processing or replacement.

Plan supported packs, visible-face protection, matching groups and staged-delivery references with the receiving location. Email drawings, finish references or purchasing requirements to sales@plywoodsupplier.cn; we can complete the selected configuration, supplied work and delivery scope with your quotation.

PLAN YOUR PANEL ORDER

Turn your wood finish and project brief into a production order.

Work with one factory team on the face, core, custom sizes and component sample. We help connect the selected panel to the project records, machining details and packing plan, so purchasing and the workshop can move forward using the same material schedule.

CE Pencil Cedar Plywood

Your panel construction, finished component and delivery plan

  • Project use, finished appearance and component drawing
  • Core, nominal thickness, format and quantity
  • Samples, purchasing documents and delivery plan
View the product specification

Choose a sample for your project

The finished surface and a working component

Select the face and reverse under the intended finish, then use the chosen core and thickness for the machining or fitting trial. Add your project document schedule to the request; we help organise the material sample and the applicable product information together.

Review this product’s sample plan

For a quotation, add your quantity, destination and required timing. You can start with the details you already have.

PanelSource · Xuzhou PanelSource Co., Ltd.
https://www.plywoodsupplier.cn/product/ce-2-pencil-cedar-plywood/
sales@plywoodsupplier.cn

SAMPLES & ORDER PLANNING

Plan the first order.

Samples
Standard samples without special work or a logo have no sample charge; delivery is separate. Custom samples are agreed individually.
Order quantity
Our starting guidance is one container for standard sizes and 3,000–10,000 pieces for custom sizes or designs. Tell us your trial quantity.
Production
All products are made to customer order. Production takes 10–15 days; the order confirmation records the start date and production schedule. Sea transit is additional.
Payment
Where a deposit applies, our standard reference is 30% before production, with the balance after inspection and before loading. T/T or L/C terms are agreed for the order.
Shipping
Panel orders ship by container. Share your destination so we can arrange the loading plan and quote the freight separately from production.
After-sales warranty
All products include a 180-day after-sales warranty. Contact our team with the order reference and details of any product concern.

Tell us your quantity, sample needs and target delivery date. We’ll put the price, payment terms and production schedule into your quotation.

PRODUCT-SPECIFIC QUESTIONS

Questions about CE Pencil Cedar Plywood

What Pencil Cedar plywood can I order?

Choose 2–30mm plywood in 1220 × 2440mm, 1250 × 2500mm or 1500 × 3000mm sheets, or send custom sheet and component sizes. We help select the face, reverse, core and supplied processing around your interior, furniture or project drawing.

How do I choose the face, reverse and core?

Mark the visible sides and edge on the component drawing, then select the Pencil Cedar appearance under the intended coating. Core choices include poplar, hardwood, birch and eucalyptus. Request the selected construction for machining or fitting trials.

Which face grades are available?

The grade pairs are BB/BB, BB/CC, CC/CC and CC/DD. Use the sample to choose colour range, permitted features, repairs and sanding on the face and reverse. Keep any structural or other project performance requirements with the selected construction.

How should I request CE 2+ plywood for a project?

Send the intended use, destination and the project’s material or document schedule. System 2+ describes assessment and verification responsibilities under the applicable CPR-2011 route. We help connect the offered construction, thicknesses and required characteristics to the relevant product records.

What is the difference between an FPC certificate and a performance declaration?

Under system 2+, the notified body certifies factory production control, while the manufacturer provides the applicable performance declaration. Link the manufacturer, product scope and intended use to the panel quotation, with any required test or classification records.

Does every furniture or packing component need the same CE documents?

Plan the records around the intended use and purchasing contract. EN 13986 concerns wood-based panels for construction. Furniture, removable components and packing can have different requirements; share the application and destination so the document schedule follows the material you need.

How does the transition between construction-product regulations affect an order?

Use the applicable route and technical specification for the product at the procurement date. The transition proceeds by product family and technical specification. Keep the declaration type, dated product scope and applicable FPC information with the order instead of changing the document route on the calendar year alone.

Is a commercial 3/4 inch panel exactly 19.05mm?

The exact conversion is 19.05mm; the commercial selection here is 18–19mm. Put the required millimetre dimension and tolerance on the drawing and order. We can then quote the panel around your fitting or finished assembly.

Which tolerance should I choose for 9mm plywood?

Both listed bands include 9mm: ±0.2mm gives 8.8–9.2mm, and ±0.3mm gives 8.7–9.3mm. Select the required band with the quotation and identify the supplied condition and measurement method. Include any groove, profile or fitting limits in the component brief.

Can I change an 18mm order to 19mm?

Compare the alternative as its own order line. The listed intervals are 17.7–18.3mm and 18.7–19.3mm. Against a selected fixed 18.4mm groove, they give 0.1–0.7mm clearance and 0.3–0.9mm interference respectively. Include groove limits, coating and component fit in the final selection.

How does thickness change the material quantity?

For 80 sheets at 1250 × 2500mm, 18mm gives 4.5m³ and 19mm gives 4.75m³ of nominal panel volume: an increase of 0.25m³ or 5.56%. Both have 250m² of one-face area. Compare the actual quotations using the same units and supplied scope.

How do I specify bonding, emissions and moisture?

Select MR, melamine or WBP phenolic bonding for the service conditions, then state the E1 or E2 emission requirement with its method or records. This range has a 10–15% moisture reference. Plan the receiving condition and measurement method for the intended workshop and finish.

Which sample helps me choose the finish and check machining?

Use a face-and-edge sample under the intended coating for appearance, a larger matched set for adjoining panels, or a component with the actual groove, rebate or fitting for assembly. Identify the core, thickness, drawing revision and supplied condition with the sample request.

How are sheets and container loads planned?

Choose the format around the part sizes, grain, trimming and saw kerfs. The starting loading references are 8 pallets/20ft, 16/40ft and 18/40HQ. Actual sheet count, packing dimensions and gross mass follow the selected format, thickness, protection and route.

Can you support cut parts and staged delivery?

We can quote custom cutting and the machining or finish your workshop needs. Keep the order line, drawing revision and material reference with each pack and part group. Add delivery stages, matching sets and the required document handover to the supply schedule.

How do I start a factory quotation?

Send a drawing, photo, finish reference or panel sizes, plus quantity and destination when known. Add any CE-related project wording; our team helps complete the construction, sample and supply choices. Available to order, with 10–15 days production, container shipping, freight terms per order and a 180-day after-sales warranty.

Compare the adjacent options

CONTACT OUR FACTORY

Let’s plan your Pencil Cedar plywood supply.

Start with a project photo, drawing, finish reference or the sizes you know. Add quantity, destination and any CE-related purchasing wording; we can help complete the panel construction, sample and delivery choices.

  • Sheet formats: 1220 × 2440mm, 1250 × 2500mm and 1500 × 3000mm; custom sizes and cut parts by enquiry.
  • Thickness range: 2–30mm; specify the selected nominal in millimetres.
  • Supply scope: Full sheets, cut blanks or processed components from our factory in Xuzhou, Jiangsu, China.

Have a drawing, finish reference or project document schedule? Email it to sales@plywoodsupplier.cn. Start with the details you have; we’ll help you work through the rest.

Send us your panel requirements.

Tell us your panel, dimensions, quantity and destination port.

Request a quote ↗