Marine grade plywood is plywood made to a marine specification, combining selected face and core veneers with durable, water-resistant glue bonds. Buyers choose it for boatbuilding, marine joinery and other demanding wet-service projects where the panel's construction, machining quality and protective finish matter. The named grade describes the material you order; your component drawing brings that material into the finished job.
Planning a cabin refit, fitted cover or outdoor joinery order? This guide explains how to compare marine plywood, choose a useful product route and move from a drawing or photograph to a sample and factory quotation.
A quick buying guide to marine plywood
Start with the part you are making and how it will meet moisture. Then bring three decisions together:
- The panel: thickness, face and core species, appearance and the marine standard your project needs.
- The finished component: dimensions, grain direction, openings, supports, joints and protective finish.
- The factory supply: full sheets, cutting blanks or prepared parts, with a sample, documents and packing matched to the order.
If you are looking for waterproof plywood, marine plywood is a useful route to discuss. Plan the water-resistant bond with protection of faces, cut edges and openings. For pricing, compare the marine plywood price range with the same construction and supplied stage, then ask for a quotation using your dimensions and destination.
What is marine plywood used for?
Marine plywood is used for hull and deck components, bulkheads, cabin linings, access covers and marine furniture. It also serves exterior joinery and other projects that call for marine-grade veneer construction and bonding. The right choice starts with the part's role, exposure and finished appearance.
The face veneers provide the surface for paint, clear finish or covering. Inner veneers form the material exposed by machining and held by joints or fittings. The adhesive bonds connect those layers through the specified service conditions. Looking at faces, core and bond together makes quotations easier to compare than choosing by the word “marine” or a face species alone.
For a structural hull, deck or bulkhead, bring the designer's thickness, properties, veneer direction and connection details into the panel schedule. For joinery, start with the visible finish and fit, then choose the construction and processing around those needs.
Choose a product route for your marine plywood project
These five routes organise different purchasing decisions. The general range is the starting point for a mixed panel schedule; the other pages develop a particular timber, thickness or fire-treated interior requirement.
| Your purchasing need | Product route | What to take into the enquiry |
|---|---|---|
| A panel schedule or choice of marine construction | Marine Grade Plywood | Required standard, thicknesses, face/core selection, dimensions and quantities for each order line. |
| Okoume through every veneer layer | All-Okoume Marine Plywood | All-Okoume construction, visible faces, grain direction, component weight and any matching left/right parts. |
| A specified 12mm cover or fitted interior part | 12mm Marine Plywood | Nine-ply construction, coated clearances, recesses, mating frame, hardware and supplied processing stage. |
| A specified 18mm panel with openings or fittings | 18mm Marine Plywood | Eleven-ply construction, cut-outs, backing footprints, fixing access, retained material and edge protection. |
| A fire requirement in a protected, humid interior | Fireproof Marine Plywood | Indoor-humid service, selected fire-treated construction, finish, mounting and project documents. This is a separate route for that specific requirement. |
Use the marine plywood category comparison to explore the range, or send us the part you need to make. We help choose the relevant route and identify the information needed for its quotation.
Choose the species, thickness and sheet format together
All-Okoume marine plywood uses Okoume in the face, reverse and inner layers. Okoume-faced plywood with another core is a separate construction. Name the face, reverse and core on the order, then select the visible veneer range and permitted repairs around the finished appearance.
The general Marine Grade Plywood schedule lists 1.5, 3, 4, 5, 6, 8, 9, 12, 15, 18, 22 and 25mm. Its 12mm construction has nine plies and its 18mm construction eleven. Keep the veneer arrangement and finished dimensional limits with the selected thickness; the all-Okoume and fireproof product routes have their own schedules.
Standard formats are 1220 × 2440mm, 1220 × 2500mm and 1220 × 3050mm. Larger project formats include 1500 × 3000mm and 1530 × 3100mm, selected with the construction and quantity. For a cutting quotation, supply the part dimensions, grain direction and oversize allowances as well as the preferred sheet.
Sheet size affects usable yield, while the panel construction affects weight and processing. The Okoume component drawing guide follows matching faces, grain, openings and handed parts. The 12mm cutting guide shows how a machining allowance can change the preferred sheet format.
For weight-sensitive work, use dimensions and density from the chosen construction, then add the retained coating, fittings and backing. Keep a calculated loading reference with its inputs and a tested report configuration with its specimen identity when comparing the figures.

Marine plywood vs exterior plywood vs WBP
These descriptions refer to different parts of an offer. Marine grade brings veneer construction and bonding together under the named marine standard. Exterior describes the stated use specification; WBP is the familiar trade term for water and boil resistant bonding. A sheet can carry more than one of these descriptions.
| Description | What it tells you | What to compare |
|---|---|---|
| Marine plywood | Veneer quality, construction and bonding requirements under the named marine standard. | Standard and edition, face and core construction, thickness and supporting documents. |
| Exterior plywood | The declared exterior-use specification, with its own permitted veneer features. | Required grade, moisture exposure, structural properties and the finishing work included. |
| WBP plywood | A trade description for water and boil resistant bonding. | Bond test and class alongside the veneer quality and complete panel specification. |
| Ordinary interior plywood | A panel offered for its stated indoor service conditions. | Face quality, core and bond for the intended environment, especially where wetting is expected. |
| Birch or Okoume plywood | The species named for the faces or the full construction. | Species in every required layer, plus bond, grade, weight and finishing needs. |
Use our WBP plywood guide for bonding terminology and the birch versus marine plywood comparison for timber choices. Compare the complete construction, dimensions and intended finish when considering a different panel. Keep substitutions for structural components with the designer's requirements.
Marine plywood standards and reports for purchasing
BS 1088:2018 specifies standard and lightweight marine plywood classes. Put the edition and class requested by the project on the enquiry, with the construction and relevant purchasing documents. This gives the buyer and factory the same material requirement to work from.
For US specifications, PS 1-22, section 5.6.1, specifies Group 1 Douglas-fir or Western Larch veneers, B-grade or better inner plies and restricted gaps and splits for marine grade. It sets a different construction route from BS 1088. The NIST product standards programme publishes the standard information; name the required system rather than treating the two as interchangeable.
Keep bond quality, panel grade and component design connected
EN 314-2 addresses bonding quality using the EN 314-1 test methods. EN 636 addresses plywood specifications for dry, humid and exterior conditions, including structural and non-structural use. Match each record to the question it answers: the bond, the selected panel or the designed component.
Keep thickness, timber, layup, dimensions and surface condition with the report's specimen description. Our team helps assemble the relevant records for the configuration being ordered, including the standard edition and installation or finish details where they form part of the requirement.
18mm marine plywood: SGS test report
The report covers an 18mm, 11-ply, 1220 × 2440mm configuration and selected BS 1088-1:2003 tests, including dimensions, moisture, appearance and manufacturing checks.
SGS records Class 3 bonding quality and a density of 599 kg/m3 for this 18mm marine plywood configuration, alongside dimensional, moisture and appearance checks.
View the 18mm marine plywood report and its product configuration. Use the stated construction, test scope and edition when matching documents to your order.
List the named standard beside the core, face, bond and thickness you intend to buy. Use the document review worksheet to carry that configuration into your supplier approval. Use the document review worksheet.
Make water protection part of the finished component
Marine plywood is a useful starting point for waterproof panel projects. Describe how the part meets water: cabin condensation, occasional splashes, rain or sustained wetting. Show concealed backs, horizontal ledges and areas around fixings so the coating and drainage details can be planned before assembly.
Choose a protection system for the exposure and follow its maker's preparation, application and maintenance instructions. Cover cut edges, holes, rebates and joints, then restore protection after later machining. Water entering panel edges can swell the core, making those small details important to the finished job.
For immersion, specify the complete protective assembly. Select any required biological durability or preservative treatment with the veneer species and compatible coating or adhesive system. Include access to renew worn protection during maintenance.
Compare marine plywood prices at the same supply stage
Start with the product price range, then compare quotations for the same thickness, face and core construction, marine requirement and quantity. A full-sheet offer and a prepared-component offer cover different work; putting them on the same basis makes the price difference useful.
| Supply stage | Include in the quotation | Work to account for afterwards |
|---|---|---|
| Full sheets | Thickness, construction, sheet format, faces, quantity and product documents. | Cutting yield, offcuts, machining, finish and workshop handling. |
| Oversize blanks | Blank dimensions, grain direction, extra material for final profiling and part quantities. | Final cuts, openings, edge treatment and assembly preparation. |
| Prepared components | Current drawing, final dimensions, openings, finish, protected edges and part labels. | The specified installation, hardware, seal or joint work that remains at your workshop. |
Keep the price unit and quantity basis consistent: sheet price with the selected sheet, cubic-metre price with its dimensions and thickness, or a component price with its supplied stage. Include sample arrangements, packing, freight terms and destination alongside the material and processing lines.
The exterior plywood cost checklist helps capture workshop differences when comparing an alternative. A cutting list also lets us review the sheet format and complete-set quantities before quoting the order.
Prepare an enquiry your factory can act on
You can contact us before every detail is settled. Start with the component, its use and what you want to achieve. A cabin refit may begin with dimensions and a finish photograph; a repeat production order can start from the current drawing and cutting list.
Useful details as the order develops
- Application, exposure, photograph or drawing, and the required standard.
- Thickness, sheet or part dimensions, quantity and destination.
- Face and core selection, visible grain, edge appearance and finish.
- Holes, grooves, joints, fittings, coatings and other factory work.
- Weight targets, sample purpose, product records and inspection needs.
Check that the drawing, quotation and sample name the same construction and supplied stage. For fitted panels, identify bare, coated and assembled dimensions, including the mating groove, frame or hardware. This helps the workshop receive the right material and reduces adjustments during assembly.
Use the sample to settle the production details
A useful sample answers a purchasing question. Choose a face-and-edge piece for construction and appearance, a coated face for the final finish, or the critical opening, fitting or bonded joint for processing. Our marine plywood sample plan helps turn that question into a sample brief.
Compare options at the same working detail
Use the same routed edge, coating, joint or hardware when comparing two constructions. Identify each piece with its thickness, core, reference face and quotation line. Where weight matters, retain the measurement condition and add the finish and fittings used in the completed component.
Once the sample is selected, carry its reference, drawing revision, finish and dimensional requirements into the order. Give each thickness and construction its own line, and state the factory operations and later workshop work. For a mixed kit, include handed parts and complete-set quantities.
Connect inspection with production and delivery
Agree the dimensions, flatness, appearance and inspection scope with the order. Review faces and accessible edges, critical machined features and the relevant bond or panel records at the supplied stage. Keep the product documents and inspection records tied to the construction and quotation line.
Before dispatch, reconcile sheet counts or complete component sets, part labels, drawing references and pack contents. Flat support and agreed face and edge protection help your receiving team identify and handle the material. Carry the chosen sample and construction into repeat orders; update them together when the core, thickness, adhesive or finish changes.
Marine plywood buying questions
Is marine plywood waterproof?
Marine plywood uses durable, water-resistant bonding for its specified service conditions. For a waterproof component, plan the protective system around faces, cut edges, holes and joints, with drainage and maintenance for the actual exposure.
How is marine plywood different from exterior or WBP plywood?
Marine grade combines veneer quality, construction and bonding under a marine specification. Exterior identifies a stated use specification; WBP describes water and boil resistant bonding. Compare the complete panel and finish needed for the same component.
Does marine grade always mean all-Okoume?
Marine grade and veneer species describe different choices. All-Okoume uses Okoume throughout; other marine configurations use their specified faces and inner timbers. Name the layers and marine standard you need on the quotation.
Should I choose 12mm or 18mm marine plywood?
Follow the component's design and fitting requirements. Our 12mm page develops clearances, recesses and prepared covers; the 18mm page develops openings, backing and bolted details. Choose the thickness with its actual construction, supports and finish.
Is fireproof marine plywood the right route for every marine job?
Choose that route when the project has a fire requirement for a protected, humid interior. Include the selected fire-treated construction, finish, mounting and product documents. The general marine range serves other panel schedules and exposure requirements.
Does an EN 314 result cover a BS 1088 order?
EN 314 provides bonding evidence. A BS 1088 order also includes the applicable veneer and panel requirements. Send the requested standard and configuration so we can help assemble the relevant records.
How should I compare marine plywood prices?
Use the same thickness, construction, quantity and supply stage. Include sheet yield or component counts, machining, finish, packing and delivery terms. Send a cutting list for a quotation that reflects the work your workshop will receive.
Can I order sheets and machined parts together?
Yes. List each construction and supplied stage separately, with drawing references and quantities. We help plan the material or working-detail sample, factory operations, identification and packing for the mixed order.
